Nios® V Embedded Processor Design Handbook

ID 726952
Date 8/12/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

6.4.2. Overview

You can generate the µC/TCP-IP Example Designs in the IP Catalog. The example designs are based on the Intel Arria 10 SoC development kit. Using the scripts, the hardware and software design are generated, and programmed as SRAM Object Files (.sof) into the device. Using the memory-initialized .sof file, the Nios® V processor boots the µC/TCP-IP application from the On-Chip Memory after resetting the processor during User Mode.

The featured µC/TCP-IP Example Designs are :

  • µC/TCP-IP IPerf Example Design
    • This example design incorporated the µC/IPerf, an iPerf 2 server or client developed for the µC/TCP-IP Stack and the µC/OS-II RTOS. iPerf 2 is a benchmarking tool for measuring performance between two systems, and it can be used as a server or a client.
    • An iPerf server receives iPerf request sent over a TCP/IP connection from any iPerf clients, and runs the iPerf test according to the provided arguments. Each test reports the bandwidth, loss and other parameters.
      Figure 80. µC/TCP-IP IPerf Data Flow Diagram
  • µC/TCP-IP Simple Socket Server Example Design
    • This example design demonstrates communication with a telnet client on a development host PC. The telnet client offers a convenient way of issuing commands over a TCP/IP socket to the Ethernet-connected µC/TCP-IP running on the development board with a simple TCP/IP socket server example.
    • The socket server example receives commands sent over a TCP/IP connection and turns LEDs on and off according to the commands. The example consists of a socket server task that listens for commands on a TCP/IP port and dispatches those commands to a set of LED management tasks.
      Figure 81. µC/TCP-IP Simple Socket Server Data Flow Diagram
      Note: The Nios V target system does not implement a full telnet server.