Visible to Intel only — GUID: yee1637757458678
Ixiasoft
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel Agilex® 7 F-tile Devices
2. HDMI 2.1 Design Example (Support FRL = 1, Enable Active Video Protocol = None)
3. HDMI 2.1 Design Example with AXI4-stream Interface Enabled (Support FRL =1, Enable Active Video Protocol = AXIS-VVP Full)
4. Document Revision History for the F-Tile HDMI Intel® FPGA IP Design Example User Guide
2.1. Design Features
2.2. Hardware and Software Requirements
2.3. HDMI 2.1 RX-TX Retransmit Design Block Diagram
2.4. Design Parameters
2.5. Design Components
2.6. Design Software Flow
2.7. Clocking Scheme
2.8. Interface Signals
2.9. Hardware Setup
2.10. Simulation Testbench
2.11. Debugging Features
3.7.1. HDMI 2.1 RX-TX Retransmit Design without Video Frame Buffer (Enable Active Video Protocol = AXIS-VVP Full, Video In and Out Use the Same Clock = ON)
3.7.2. HDMI 2.1 RX-TX Retransmit Design with Video Frame Buffer (Enable Active Video Protocol = AXIS-VVP Full, Video In and Out Use the Same = OFF)
3.7.3. Clock Details
Visible to Intel only — GUID: yee1637757458678
Ixiasoft
2.11.2. SCDC Information from Sink Connected to TX
Use this feature to obtain SCDC information.
- Run the Nios II terminal command on the Nios II Command Shell:
nios2-terminal
- Press user_pb[2] on the Intel Agilex® 7 I-series SoC FPGA Development Kit.
The software reads and displays the SCDC information on the sink connected to TX on the Nios II terminal.