DisplayPort Stratix® 10 FPGA IP Design Example User Guide

Download PDF
ID 683887
Date 4/10/2024
Public
Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. Parallel Loopback Design Examples 3. HDCP Over DisplayPort Design Example 4. DisplayPort Stratix® 10 FPGA IP Design Example User Guide Archives 5. Revision History for the DisplayPort Stratix® 10 FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating ELF File
2. Parallel Loopback Design Examples x
2.1. Stratix® 10 DisplayPort SST Parallel Loopback Design Features 2.2. Stratix® 10 DisplayPort SST TX-only or RX-only Design Features 2.3. Design Components 2.4. Clocking Scheme 2.5. Interface Signals and Parameters 2.6. Hardware Setup 2.7. Simulation Testbench 2.8. DisplayPort Transceiver Reconfiguration Flow 2.9. Transceiver Lane Configurations
2.1. Stratix® 10 DisplayPort SST Parallel Loopback Design Features x
2.1.1. DisplayPort 2.0 UHBR10 (10 Gbps) Data Rate Support 2.1.2. DisplayPort 2.0 UHBR20 (20 Gbps) Data Rate Support 2.1.3. Enabling Adaptive Sync Support
2.2. Stratix® 10 DisplayPort SST TX-only or RX-only Design Features x
2.2.1. Stratix® 10 DisplayPort SST TX-only Design Features 2.2.2. Stratix® 10 DisplayPort SST RX-only Design Features
3. HDCP Over DisplayPort Design Example x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios® V Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Setting Up the Hardware 3.4.2. Generating the Design 3.4.3. Including HDCP Production Keys 3.4.4. Compiling the Design 3.4.5. Viewing the Results
3.4.3. Including HDCP Production Keys x
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. Parallel Loopback Design Examples
3. HDCP Over DisplayPort Design Example
4. DisplayPort Stratix® 10 FPGA IP Design Example User Guide Archives
5. Revision History for the DisplayPort Stratix® 10 FPGA IP Design Example User Guide

2.6. Hardware Setup

The DisplayPort Intel® FPGA IP design example is 8Kp30 capable and performs a loop-through for a standard DisplayPort video stream.
  1. To run the hardware test, connect a DisplayPort-enabled source device to the DisplayPort FMC daughter card sink input.
  2. The DisplayPort sink decodes the port into a standard video stream and sends it to the clock recovery core.
  3. The clock recovery core synthesizes the original video pixel clock to be transmitted together with the received video data.
    Note: You require the clock recovery feature to produce video without using a frame buffer.
  4. The clock recovery core then sends the video data to the DisplayPort source and the Transceiver Native PHY TX block.
  5. Connect the DisplayPort FMC daughter card source port to a monitor to display the image.
Table 22.  On-board User LED Functions
LEDs Function
USER_LED_G[0]

This LED indicates that the source is successfully lane-trained.

At this point, the IP core asserts rx0_vid_locked.

USER_LED_G[2:1] These LEDs indicate the RX link rate.
  • 2'b00 = RBR
  • 2'b01 = HBR
  • 2'b10 = HBR2
  • 2'b11 = HBR3
USER_LED_R[3:0]

These LEDs illuminate design example lane counts.

  • 4'b0001 = 1 lane
  • 4'b0010 = 2 lanes
  • 4'b0100 = 4 lanes
Level Two Title