DisplayPort Stratix® 10 FPGA IP Design Example User Guide

Download PDF
ID 683887
Date 4/10/2024
Public
Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. Parallel Loopback Design Examples 3. HDCP Over DisplayPort Design Example 4. DisplayPort Stratix® 10 FPGA IP Design Example User Guide Archives 5. Revision History for the DisplayPort Stratix® 10 FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating ELF File
2. Parallel Loopback Design Examples x
2.1. Stratix® 10 DisplayPort SST Parallel Loopback Design Features 2.2. Stratix® 10 DisplayPort SST TX-only or RX-only Design Features 2.3. Design Components 2.4. Clocking Scheme 2.5. Interface Signals and Parameters 2.6. Hardware Setup 2.7. Simulation Testbench 2.8. DisplayPort Transceiver Reconfiguration Flow 2.9. Transceiver Lane Configurations
2.1. Stratix® 10 DisplayPort SST Parallel Loopback Design Features x
2.1.1. DisplayPort 2.0 UHBR10 (10 Gbps) Data Rate Support 2.1.2. DisplayPort 2.0 UHBR20 (20 Gbps) Data Rate Support 2.1.3. Enabling Adaptive Sync Support
2.2. Stratix® 10 DisplayPort SST TX-only or RX-only Design Features x
2.2.1. Stratix® 10 DisplayPort SST TX-only Design Features 2.2.2. Stratix® 10 DisplayPort SST RX-only Design Features
3. HDCP Over DisplayPort Design Example x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios® V Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Setting Up the Hardware 3.4.2. Generating the Design 3.4.3. Including HDCP Production Keys 3.4.4. Compiling the Design 3.4.5. Viewing the Results
3.4.3. Including HDCP Production Keys x
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. Parallel Loopback Design Examples
3. HDCP Over DisplayPort Design Example
4. DisplayPort Stratix® 10 FPGA IP Design Example User Guide Archives
5. Revision History for the DisplayPort Stratix® 10 FPGA IP Design Example User Guide

3.4.1. Setting Up the Hardware

The first stage of the demonstration is hardware setup.

To set up the hardware, follow these steps:

  1. Connect the Bitec DisplayPort FMC daughter card (revision 10) to the Stratix® 10 development kit at FMC port A.
  2. Connect the Stratix® 10 development kit to your PC using a USB cable.
  3. Connect a DisplayPort cable from the DisplayPort RX connector on the Bitec DisplayPort FMC daughter card to an HDCP-enabled DisplayPort device, such as a graphic card with DisplayPort output.
  4. Connect another DisplayPort cable from the DisplayPort TX connector on the Bitec DisplayPort FMC daughter card to an HDCP-enabled DisplayPort device, such as a display monitor with DisplayPort input.
Level Two Title