DisplayPort Stratix® 10 FPGA IP Design Example User Guide

Download PDF
ID 683887
Date 4/10/2024
Public
Document Table of Contents
Document Table of Contents x
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide 2. Parallel Loopback Design Examples 3. HDCP Over DisplayPort Design Example 4. DisplayPort Stratix® 10 FPGA IP Design Example User Guide Archives 5. Revision History for the DisplayPort Stratix® 10 FPGA IP Design Example User Guide
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Hardware and Software Requirements 1.3. Generating the Design 1.4. Simulating the Design 1.5. Compiling and Testing the Design 1.6. DisplayPort Intel® FPGA IP Design Example Parameters
1.5. Compiling and Testing the Design x
1.5.1. Regenerating ELF File
2. Parallel Loopback Design Examples x
2.1. Stratix® 10 DisplayPort SST Parallel Loopback Design Features 2.2. Stratix® 10 DisplayPort SST TX-only or RX-only Design Features 2.3. Design Components 2.4. Clocking Scheme 2.5. Interface Signals and Parameters 2.6. Hardware Setup 2.7. Simulation Testbench 2.8. DisplayPort Transceiver Reconfiguration Flow 2.9. Transceiver Lane Configurations
2.1. Stratix® 10 DisplayPort SST Parallel Loopback Design Features x
2.1.1. DisplayPort 2.0 UHBR10 (10 Gbps) Data Rate Support 2.1.2. DisplayPort 2.0 UHBR20 (20 Gbps) Data Rate Support 2.1.3. Enabling Adaptive Sync Support
2.2. Stratix® 10 DisplayPort SST TX-only or RX-only Design Features x
2.2.1. Stratix® 10 DisplayPort SST TX-only Design Features 2.2.2. Stratix® 10 DisplayPort SST RX-only Design Features
3. HDCP Over DisplayPort Design Example x
3.1. High-bandwidth Digital Content Protection (HDCP) 3.2. HDCP Over DisplayPort Design Example Architecture 3.3. Nios® V Processor Software Flow 3.4. Design Walkthrough 3.5. Protection of Encryption Key Embedded in FPGA Design 3.6. Debug Guidelines
3.4. Design Walkthrough x
3.4.1. Setting Up the Hardware 3.4.2. Generating the Design 3.4.3. Including HDCP Production Keys 3.4.4. Compiling the Design 3.4.5. Viewing the Results
3.4.3. Including HDCP Production Keys x
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) 3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1)
3.4.3.1. Storing Plain HDCP Production Keys in the FPGA (Support HDCP Key Management = 0) x
3.4.3.1.1. HDCP Key Mapping from DCP Key Files 3.4.3.1.2. hdcp1x_tx_kmem.v and hdcp1x_rx_kmem.v files 3.4.3.1.3. hdcp2x_rx_kmem.v file 3.4.3.1.4. hdcp2x_tx_kmem.v file
3.4.3.2. Storing Encrypted HDCP Production Keys in the External Flash Memory or EEPROM (Support HDCP Key Management = 1) x
3.4.3.2.1. Intel KEYENC 3.4.3.2.2. Key Programmer
3.5. Protection of Encryption Key Embedded in FPGA Design x
3.5.1. Security Considerations
3.6. Debug Guidelines x
3.6.1. HDCP Status Signals 3.6.2. Modifying HDCP Software Parameters 3.6.3. Frequently Asked Questions (FAQ)
1. DisplayPort Intel® FPGA IP Design Example Quick Start Guide
2. Parallel Loopback Design Examples
3. HDCP Over DisplayPort Design Example
4. DisplayPort Stratix® 10 FPGA IP Design Example User Guide Archives
5. Revision History for the DisplayPort Stratix® 10 FPGA IP Design Example User Guide

2.4. Clocking Scheme

The clocking scheme illustrates the clock domains in the DisplayPort Intel® FPGA IP design example.
Figure 9.  DisplayPort Intel® FPGA IP Design Example Clocking Scheme
Table 14.  Clocking Scheme Signals
Clock Signal Name in Design Description
TX PLL Refclock tx_pll_refclk

135 MHz TX PLL reference clock, that is divisible by the transceiver for all DisplayPort 1.4 data rates (1.62 Gbps, 2.7 Gbps, 5.4 Gbps, and 8.1 Gbps).

Note: The reference clock source of the TX PLL refclock is located at the HSSI refclk pin.
TX PLL Refclock2 tx_pll_refclk2

100 MHz TX PLL reference clock, that is divisible by the transceiver for DisplayPort 2.0 10 Gbps data rate.

Note: The reference clock source of the TX PLL refclock is located at the HSSI refclk pin.
TX Transceiver Clockout gxb_tx_clkout

TX clock recovered from the transceiver, and the frequency varies depending on the data rate and symbols per clock.
Data Rate Symbols per Clock/PMA Width Frequency (MHz)

RBR (1.62 Gbps)

Dual (20 bits)

 81
Quad (40 bits) 40.5

HBR (2.7 Gbps)

 Dual (20 bits) 135
Quad (40 bits) 67.5

HBR2 (5.4 Gbps)

 Dual (20 bits) 270
Quad (40 bits) 135

HBR3 (8.1 Gbps)

 Quad (40 bits) 202.5
UHBR10 (10 Gbps) N/A (32 bits) 312.5
 
TX PLL Serial Clock gxb_tx_bonding_clocks

Serial fast clock generated by TX PLL. The clock frequency is set based on the data rate.
RX Refclock rx_cdr_refclk

135 MHz transceiver clock data recovery (CDR) reference clock, that is divisible by all DisplayPort 14 data rates (1.62 Gbps, 2.7 Gbps, 5.4 Gbps, and 8.1 Gbps).

Note: The reference clock source of the RX refclock is located at the HSSI refclk pin.
RX Refclock2 rx_cdr_refclk2

100 MHz transceiver clock data recovery (CDR) reference clock, that is divisible by DisplayPort 2.0 10 Gbps data rate.

Note: The reference clock source of the RX refclock is located at the HSSI refclk pin.
RX Transceiver Clockout gxb_rx_clkout

RX clock recovered from the transceiver, and the frequency varies depending on the data rate and symbols per clock.
Data Rate Symbols per Clock/PMA Width Frequency (MHz)

RBR (1.62 Gbps)

Dual (20 bits)

 81
Quad (40 bits) 40.5

HBR (2.7 Gbps)

 Dual (20 bits) 135
Quad (40 bits) 67.5

HBR2 (5.4 Gbps)

 Dual (20 bits) 270
Quad (40 bits) 135

HBR3 (8.1 Gbps)

 Quad (40 bits) 202.5
UHBR10 (10 Gbps) N/A (32 bits) 312.5
 
Management Clock rx_rcfg_mgmt_clk

tx_rcfg_mgmt_clk

A free running 100 MHz clock for both Avalon® memory-mapped interface for reconfiguration and PHY reset controller for transceiver reset sequence.

Component Required Frequency (MHz)
Avalon® memory-mapped reconfiguration 100 – 125
Transceiver PHY reset controller 1 – 500
 
Audio Clock dp_audio_clk

DisplayPort audio clock.
16 MHz Clock clk_16

16 MHz clock used to encode and decode auxiliary channel in the DisplayPort Intel® FPGA IP source and sink IP cores. This clock is also used as a reference clock in the Pixel Clock module for fractional calculation.

Calibration Clock dp_rx_clk_cal

dp_tx_clk_cal

A 50 MHz calibration clock input that must be synchronous to the Transceiver Reconfiguration module's clock. This clock is used in the DisplayPort Intel® FPGA IP core's reconfiguration logic.

RX Video Clock dp_rx_vid_clkout

Video clock for DisplayPort sink to clock video data stream.

If MAX_LINK_RATE = HBR2 and PIXELS_PER_CLOCK = Dual, video clock uses 300 MHz. Otherwise, fixed to 160 MHz.

TX Video Clock tx_vid_clk

Recovered video clock from the PCR module that reflects the actual video clock frequency.

Used when DisplayPort source's TX_SUPPORT_IM_ENABLE = 0.

TX IM Clock tx_im_clk

Video clock for DisplayPort source to clock video data stream. Must be the same as the RX video clock in this design.

Used when DisplayPort source's TX_SUPPORT_IM_ENABLE = 1.

Level Two Title