F-tile Architecture and PMA and FEC Direct PHY IP User Guide

Download PDF
ID 683872
Date 1/25/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. F-tile Overview 2. F-tile Architecture 3. Implementing the F-Tile PMA/FEC Direct PHY Intel® FPGA IP 4. Implementing the F-Tile Reference and System PLL Clocks Intel® FPGA IP 5. Implementing the F-Tile Global Avalon® Memory-Mapped Interface Intel® FPGA IP 6. F-tile PMA/FEC Direct PHY Design Implementation 7. Supported Tools 8. Debugging F-Tile Transceiver Links 9. F-tile Architecture and PMA and FEC Direct PHY IP User Guide Archives 10. Document Revision History for F-tile Architecture and PMA and FEC Direct PHY IP User Guide
2. F-tile Architecture x
2.1. F-Tile Building Blocks 2.2. F-Tile Placement Rules 2.3. PMA Architecture 2.4. Clock Architecture
2.1. F-Tile Building Blocks x
2.1.1. FHT and FGT PMAs 2.1.2. 400G Hard IP and 200G Hard IP 2.1.3. PMA Data Rates 2.1.4. FEC Architecture 2.1.5. PCIe* Hard IP 2.1.6. Bonding Architecture 2.1.7. Deskew Logic 2.1.8. Embedded Multi-die Interconnect Bridge (EMIB) 2.1.9. IEEE 1588 Precision Time Protocol for Ethernet 2.1.10. Clock Networks 2.1.11. Reconfiguration Interfaces
2.2. F-Tile Placement Rules x
2.2.1. PMA-to-Fracture Mapping 2.2.2. Determining Which PMA to Map to Which Fracture 2.2.3. Hard IP Placement Rules 2.2.4. IEEE 1588 Precision Time Protocol Placement Rules 2.2.5. Topologies 2.2.6. FEC Placement Rules 2.2.7. Clock Rules and Restrictions 2.2.8. Bonding Placement Rules 2.2.9. Preserving Unused PMA Lanes
2.2.1. PMA-to-Fracture Mapping x
2.2.1.1. FHT-PMA-to-400G-Hard-IP-Fracture Mapping 2.2.1.2. FGT-PMA-to-400G-Hard-IP-Fracture Mapping 2.2.1.3. FGT-PMA-to-200G-Hard-IP-Fracture Mapping
2.2.2. Determining Which PMA to Map to Which Fracture x
2.2.2.1. Implementing One 200GbE-4 Interface with 400G Hard IP and FHT 2.2.2.2. Implementing One 200GbE-2 Interface with 400G Hard IP and FHT 2.2.2.3. Implementing One 100GbE-1 Interface with 400G Hard IP and FHT 2.2.2.4. Implementing One 100GbE-4 Interface with 400G Hard IP and FGT 2.2.2.5. Implementing One 10GbE-1 Interface with 200G Hard IP and FGT 2.2.2.6. Implementing Three 25GbE-1 Interfaces with 400G Hard IP and FHT 2.2.2.7. Implementing One 50GbE-1 and Two 25GbE-1 Interfaces with 400G Hard IP and FHT 2.2.2.8. Implementing One 100GbE-1 and Two 25GbE-1 Interfaces with 400G Hard IP and FHT 2.2.2.9. Implementing Two 100GbE-1 and One 25GbE-1 Interfaces with 400G Hard IP and FHT 2.2.2.10. Implementing 100GbE-1, 100GbE-2, and 50GbE-1 Interfaces with 400G Hard IP and FHT
2.2.5. Topologies x
2.2.5.1. Topology 5: 400G Hard IP (FHT) + 200G Hard IP (FGT) Example 2.2.5.2. Topology 14: 1x PCIe x4 + 400G Hard IP (FGT) with PTP Example
2.2.8. Bonding Placement Rules x
2.2.8.1. Bonded Lanes Use Case 1 2.2.8.2. Bonded Lanes Use Case 2
2.3. PMA Architecture x
2.3.1. FHT PMA Architecture 2.3.2. FGT PMA Architecture
2.3.1. FHT PMA Architecture x
2.3.1.1. FHT Transmitter PMA Architecture 2.3.1.2. FHT Receiver PMA Architecture 2.3.1.3. FHT PMA Loopback Modes
2.3.1.1. FHT Transmitter PMA Architecture x
2.3.1.1.1. FHT Transmitter Buffer and Phase Generator 2.3.1.1.2. FHT Serializer 2.3.1.1.3. FHT Gray-Coder and Pre-Coder 2.3.1.1.4. FHT Data Pattern Generator and Verifier
2.3.1.2. FHT Receiver PMA Architecture x
2.3.1.2.1. FHT Receiver Buffer and Equalizer 2.3.1.2.2. CDR Block 2.3.1.2.3. FHT Deserializer
2.3.2. FGT PMA Architecture x
2.3.2.1. FGT Transmitter PMA Architecture 2.3.2.2. FGT Receiver PMA Architecture 2.3.2.3. FGT PMA Tuning 2.3.2.4. FGT PMA Loopback Modes
2.3.2.1. FGT Transmitter PMA Architecture x
2.3.2.1.1. FGT Transmitter Buffer and Phase Generator 2.3.2.1.2. FGT Serializer 2.3.2.1.3. FGT Gray-Coder and Pre-Coder 2.3.2.1.4. FGT Data Pattern Generator and Verifier
2.3.2.2. FGT Receiver PMA Architecture x
2.3.2.2.1. FGT Receiver Buffer and Equalizer 2.3.2.2.2. Control Unit 2.3.2.2.3. FGT Deserializer
2.4. Clock Architecture x
2.4.1. Reference Clock Network 2.4.2. Datapath Clock Network 2.4.3. System PLL 2.4.4. Datapath Clock Cadences
2.4.1. Reference Clock Network x
2.4.1.1. FHT Reference Clock Network 2.4.1.2. FGT and System PLL Reference Clock Network 2.4.1.3. FGT Primary PLL Configuration
3. Implementing the F-Tile PMA/FEC Direct PHY Intel® FPGA IP x
3.1. F-Tile PMA/FEC Direct PHY Intel® FPGA IP Overview 3.2. Designing with F-Tile PMA/FEC Direct PHY Intel® FPGA IP 3.3. Configuring the IP 3.4. Signal and Port Reference 3.5. Bit Mapping for PMA and FEC Mode PHY TX and RX Datapath 3.6. Clocking 3.7. Custom Cadence Generation Ports and Logic 3.8. Asserting Reset 3.9. Bonding Implementation 3.10. Independent Port Configurations 3.11. Configuration Registers 3.12. Configurable Intel® Quartus® Prime Software Settings 3.13. Configuring the F-Tile PMA/FEC Direct PHY Intel® FPGA IP for Hardware Testing 3.14. Hardware Configuration Using the Avalon® Memory-Mapped Interface
3.1. F-Tile PMA/FEC Direct PHY Intel® FPGA IP Overview x
3.1.1. PMA Direct Supported Modes 3.1.2. FEC Direct Supported Modes 3.1.3. Unsupported PMA/FEC Modes
3.2. Designing with F-Tile PMA/FEC Direct PHY Intel® FPGA IP x
3.2.1. Preset IP Parameter Settings
3.3. Configuring the IP x
3.3.1. General and Common Datapath Options 3.3.2. TX Datapath Options 3.3.3. RX Datapath Options 3.3.4. RS-FEC (Reed Solomon Forward Error Correction) Options 3.3.5. Avalon® Memory Mapped Interface Options 3.3.6. Register Map IP-XACT Support 3.3.7. Example Design Generation
3.3.1. General and Common Datapath Options x
3.3.1.1. FGT PMA Configuration Rules for SATA and USB mode
3.3.2. TX Datapath Options x
3.3.2.1. TX PMA interface Parameters
3.3.3. RX Datapath Options x
3.3.3.1. RX FGT PMA Interface Options
3.4. Signal and Port Reference x
3.4.1. TX and RX Parallel and Serial Interface Signals 3.4.2. TX and RX Reference Clock and Clock Output Interface Signals 3.4.3. Reset Signals 3.4.4. RS-FEC Signals 3.4.5. Custom Cadence Control and Status Signals 3.4.6. TX PMA Control Signals 3.4.7. RX PMA Status Signals 3.4.8. TX and RX PMA and Core Interface FIFO Signals 3.4.9. PMA Avalon® Memory Mapped Interface Signals 3.4.10. Datapath Avalon® Memory Mapped Interface Signals
3.4.10. Datapath Avalon® Memory Mapped Interface Signals x
3.4.10.1. Number of Datapath Memory Mapped Avalon® Interfaces and Additional Address Bits per Interface
3.5. Bit Mapping for PMA and FEC Mode PHY TX and RX Datapath x
Total tx_parallel_data or rx_parallel_data Bit Width Equation: Example 1: Total tx/rx_parallel_data Bit Width with 2 PMA Lanes (N=2) and 8-bit PMA Width (X=1) Example 2: Total tx/rx_parallel_data Bit Width with 4 PMA Lanes (N=4) and 64-bit PMA Width (X=2) Parallel Data Mapping information for TX and RX 3.5.1. Parallel Data Mapping Information 3.5.2. TX and RX Parallel Data Mapping Information for Different Configurations 3.5.3. Example of TX Parallel Data for PMA Width = 8, 10, 16, 20, 32 (X=1) 3.5.4. Example of TX Parallel Data for PMA width = 64 (X=2) 3.5.5. Example of TX Parallel Data for PMA width = 64 (X=2) for FEC Direct Mode
3.5.2. TX and RX Parallel Data Mapping Information for Different Configurations x
3.5.2.1. TX Parallel Data Mapping Information for SATA and USB Protocol Modes for Different Configurations
3.6. Clocking x
3.6.1. Clock Ports 3.6.2. Recommended tx/rx_coreclkin Connection and tx/rx_clkout2 Source 3.6.3. Port Widths and Recommended Connections for tx/rx_coreclkin, tx/rx_clkout, and tx/rx_clkout2 3.6.4. FGT PMA Fractional Mode 3.6.5. FGT Core PLL Mode
3.7. Custom Cadence Generation Ports and Logic x
3.7.1. Enabling the tx_cadence_slow_clk_locked Port 3.7.2. Rate Match FIFO
3.8. Asserting Reset x
3.8.1. Reset Signal Requirements 3.8.2. Power On Reset Requirements 3.8.3. Reset Signals—Block Level 3.8.4. Reset Signals—Descriptions 3.8.5. Status Signals—Descriptions 3.8.6. Run-time Reset Sequence—TX 3.8.7. Run-time Reset Sequence—RX 3.8.8. Run-time Reset Sequence—TX + RX 3.8.9. Run-time Reset Sequence—TX with FEC
3.8.8. Run-time Reset Sequence—TX + RX x
3.8.8.1. Run-time Reset Sequence Approximate Time Durations
3.11. Configuration Registers x
3.11.1. PMA and FEC Direct PHY Soft CSR Register Map 3.11.2. FHT PMA Register Map 3.11.3. FGT PMA Register Map 3.11.4. FEC Register Map 3.11.5. Lane Offset Address 3.11.6. Logical Avalon® Memory-Mapped Port Indexing
3.11.6. Logical Avalon® Memory-Mapped Port Indexing x
3.11.6.1. FGT PMA Lane Addressing Example 1 3.11.6.2. FGT PMA Lane Addressing Example 2
3.13. Configuring the F-Tile PMA/FEC Direct PHY Intel® FPGA IP for Hardware Testing x
3.13.1. Using Debug Endpoint Interface within the F-Tile PMA/FEC Direct PHY Intel® FPGA IP 3.13.2. Using JTAG to Avalon® Master Bridge Intel FPGA IP
3.13.1. Using Debug Endpoint Interface within the F-Tile PMA/FEC Direct PHY Intel® FPGA IP x
3.13.1.1. RTL Connection Example for Debug Endpoint Avalon® Interface
3.13.2. Using JTAG to Avalon® Master Bridge Intel FPGA IP x
3.13.2.1. RTL Connection Example for JTAG to Avalon® Master Bridge Intel IP
3.14. Hardware Configuration Using the Avalon® Memory-Mapped Interface x
3.14.1. FHT PMA 3.14.2. FGT PMA
3.14.1. FHT PMA x
3.14.1.1. Enabling Loopback 3.14.1.2. Enabling the PRBS Generator and Verifier 3.14.1.3. TX Equalizer Settings 3.14.1.4. TX Error Injection 3.14.1.5. RX Reconvergence 3.14.1.6. Preserving Unused Lanes
3.14.2. FGT PMA x
3.14.2.1. Direct Register Method 3.14.2.2. FGT Attribute Access Method
3.14.2.1. Direct Register Method x
3.14.2.1.1. Direct Register Method Example
3.14.2.2. FGT Attribute Access Method x
3.14.2.2.1. FGT Attribute Access Method Example 1 3.14.2.2.2. FGT Attribute Access Method Example 2 3.14.2.2.3. FGT Attribute Access Method Example 3
4. Implementing the F-Tile Reference and System PLL Clocks Intel® FPGA IP x
4.1. IP Parameters 4.2. IP Port List 4.3. Mode of System PLL - System PLL Reference Clock and Output Frequencies 4.4. Guidelines for F-Tile Reference and System PLL Clocks Intel® FPGA IP Usage 4.5. Guidelines to Indicate all System PLL Reference Clocks are Ready
4.5. Guidelines to Indicate all System PLL Reference Clocks are Ready x
4.5.1. Example of Reference Clock Availability at Device Programming 4.5.2. Example Flow to Indicate All System PLL Reference Clocks are Ready
5. Implementing the F-Tile Global Avalon® Memory-Mapped Interface Intel® FPGA IP x
5.1. IP Parameters 5.2. IP Port List 5.3. Hardware Flow Using the F-Tile Global Avalon® Memory-Mapped Interface Intel® FPGA IP 5.4. Examples of Register Access Using the F-Tile Global Avalon® Memory-Mapped Interface Intel® FPGA IP
5.4. Examples of Register Access Using the F-Tile Global Avalon® Memory-Mapped Interface Intel® FPGA IP x
5.4.1. FGT PMA Registers Access Example 5.4.2. FHT PMA Registers Access Example 5.4.3. 400G MAC/PCS Interface Registers Access Example 5.4.4. 400G FEC/PMA Interface Registers Access Example 5.4.5. 200G MAC/PCS Interface Registers Access Example 5.4.6. 200G FEC/PMA Interface Registers Access Example
6. F-tile PMA/FEC Direct PHY Design Implementation x
6.1. Implementing the F-tile PMA/FEC Direct PHY Design 6.2. Instantiating the F-Tile PMA/FEC Direct PHY Intel® FPGA IP 6.3. Implementing a RS-FEC Direct Design in the F-Tile PMA/FEC Direct PHY Intel® FPGA IP 6.4. Instantiating the F-Tile Reference and System PLL Clocks Intel® FPGA IP 6.5. Enabling Custom Cadence Generation Ports and Logic 6.6. Connecting the F-tile PMA/FEC Direct PHY Design IP 6.7. Simulating the F-Tile PMA/FEC Direct PHY Design 6.8. F-tile Interface Planning
6.2. Instantiating the F-Tile PMA/FEC Direct PHY Intel® FPGA IP x
6.2.1. Setting General and Common Datapath Options 6.2.2. Setting TX Datapath Options 6.2.3. Setting RX Datapath Options
6.7. Simulating the F-Tile PMA/FEC Direct PHY Design x
6.7.1. PAM4 Encoding Schemes in Simulation
6.8. F-tile Interface Planning x
6.8.1. F-tile Interface Planner Usage Example
7. Supported Tools x
7.1. F-Tile Channel Placement Tool 7.2. F-Tile PMA and FEC Direct Port Mapping Calculator 7.3. F-Tile Clocking and Datapath Tool 7.4. F-Tile TX Equalizer Tool
8. Debugging F-Tile Transceiver Links x
8.1. F-Tile Transceiver Toolkit GUI 8.2. F-Tile Transceiver Debugging Flow Walkthrough 8.3. Transceiver Toolkit Parameter Settings 8.4. Troubleshooting Common Errors
8.1. F-Tile Transceiver Toolkit GUI x
8.1.1. Collection View
8.2. F-Tile Transceiver Debugging Flow Walkthrough x
8.2.1. Modifying the Design to Enable F-Tile Transceiver Debug 8.2.2. Programming the Design into an Intel FPGA 8.2.3. Loading the Design to the Transceiver Toolkit 8.2.4. Creating Transceiver Links 8.2.5. Running BER Tests 8.2.6. Running Eye Viewer Tests 8.2.7. Running Link Optimization Tests
1. F-tile Overview
2. F-tile Architecture
3. Implementing the F-Tile PMA/FEC Direct PHY Intel® FPGA IP
4. Implementing the F-Tile Reference and System PLL Clocks Intel® FPGA IP
5. Implementing the F-Tile Global Avalon® Memory-Mapped Interface Intel® FPGA IP
6. F-tile PMA/FEC Direct PHY Design Implementation
7. Supported Tools
8. Debugging F-Tile Transceiver Links
9. F-tile Architecture and PMA and FEC Direct PHY IP User Guide Archives
10. Document Revision History for F-tile Architecture and PMA and FEC Direct PHY IP User Guide

3.5. Bit Mapping for PMA and FEC Mode PHY TX and RX Datapath

The tx_parallel_data bit and rx_parallel_data bit width depends on the PMA width and Number of PMA lanes IP parameters. Use the following equation to determine the total tx_parallel_data or rx_parallel_data bit width:

28

Total tx_parallel_data or rx_parallel_data Bit Width Equation: 

tx/rx_parallel_data[(80*N*X)-1:0]

Where:

  • N = Number of PMA lanes value from 1 to 16.
  • X = Number of streams for the PMA configuration. Depending on PMA width, X can be 1, 2, or 4.

Refer to Variables Defining Bits for the Interfacing Ports in Port and Signal Reference for full variable definitions.

The tx/rx_parallel_data signals include the valid parallel data bits and other functionality bits, such as the data valid bit, the write enable for TX core interface FIFO in elastic mode bit, the RX deskew bit, and the alignment marker bits (for FEC mode). These signals travel to and from the FPGA fabric to the F-tile, and are clocked by the same parallel clock. This parallel clock can be a PMA clock or System PLL clock.

Example 1: Total tx/rx_parallel_data Bit Width with 2 PMA Lanes (N=2) and 8-bit PMA Width (X=1) 

tx_parallel_data [(80*2*1)-1:0] = tx_parallel_data [159:0]
rx_parallel_data [(80*2*1)-1:0] = rx_parallel_data [159:0]

Example 2: Total tx/rx_parallel_data Bit Width with 4 PMA Lanes (N=4) and 64-bit PMA Width (X=2) 

tx_parallel_data [(80*4*2)-1:0] = tx_parallel_data [639:0]
rx_parallel_data [(80*4*2)-1:0] = rx_parallel_data [639:0]

Parallel Data Mapping information for TX and RX

If the PMA width is less than or equal to 32, D=PMA width.

If the PMA width is 64 or 128, D=32.

The lower case x is defined as x=0 to X-1. For a given lane, n and given stream x, you can calculate the TX and RX parallel data information according to the following tables:

Table 51.  PMA Direct Mode TX Parallel Data Information Calculations (Enable Double width transfer = 1)
TX Parallel Data MSB LSB
Write Enable for TX Core FIFO in Elastic Mode 29 79 + (80 * x) +(80 *n * X)
TX Data (Upper Data bits) (40 + D-1) + (80 * x) + (80 *n * X) 40 + (80 * x) + (80 *n * X)
TX PMA Interface Data Valid Bit 30 31 38 + (80 * x) + (80 *n * X)
TX Data (Lower Data bits) D-1 + (80 * x) + (80 *n * X) 0 + (80 * x) +(80 *n * X)
Table 52.  PMA Direct Mode RX Parallel Data Information Calculations (Enable Double width transfer = 1)
RX Parallel Data MSB LSB
Data valid for RX Core FIFO in Elastic Mode (25) 79 + (80 * x) + (80 *n * X)
RX Deskew 32 78 + (80 * x) + (80 *n * X)
RX Data (Upper Data bits) (40 + D-1) + (80 * x) + (80 *n * X ) 40 + (80 * x) + (80 *n * X)
RX PMA Interface Data Valid Bit (26) 38 + (80 * x) + (80 *n * X)
RX Data (Lower Data bits) D-1 + (80 * x) + (80 *n * X) 0 + (80 * x) + (80 *n * X)
Table 53.  PMA Direct Mode TX Parallel Data Information Calculations (Enable Double width transfer = 0)
TX Parallel Data MSB LSB
Write Enable for TX Core FIFO in Elastic Mode (25) 79 + (80 *n)
TX PMA Interface Data Valid Bit (26) (27) 38 + (80 *n)
TX Data D-1 + (80 *n) 0 + (80 *n)
Table 54.  PMA Direct Mode RX Parallel Data Information Calculations (Enable Double width transfer = 0)
RX Parallel Data MSB LSB
Data valid for RX Core FIFO in Elastic Mode (25) 79 + (80 *n)
RX PMA Interface Data Valid Bit (26) 38 + (80 *n)
RX Data D-1 + (80 *n) 0 + (80 *n)
Table 55.  FEC Direct Mode TX Parallel Data Information Calculations (Enable Double width transfer = 1)
TX Parallel Data MSB LSB
Alignment Marker33 77 + (80 * x) +(80 *n * X)
TX Data (Upper 33 bits) 72 + (80 * x) + (80 *n * X) 40 + (80 * x) + (80 *n * X)
TX PMA Interface Data Valid Bit (26) (27) 38 + (80 * x) + (80 *n * X)
Alignment Marker (25) 37 + (80 * x) + (80 *n * X)
TX Data (Lower 31 bits) 32 + (80 * x) + (80 *n * X) 2 + (80 * x) + (80 *n * X)
Sync Head 1 + (80 * x) + (80 *n * X) 0 + (80 * x) + (80 *n * X)
Table 56.  FEC Direct Mode RX Parallel Data Information Calculations (Enable Double width transfer = 1)
RX Parallel Data MSB LSB
RX Deskew 34 78 + (80 * x) + (80 *n * X)
RX Data (Upper 33 bits) 72 + (80 * x) + (80 *n * X) 40 + (80 * x) + (80 *n * X)
RX PMA Interface Data Valid Bit (26) 35 38
Alignment Marker (29) 37
RX Data (Lower 31 bits) 32 + (80 * x) + (80 *n * X) 2 + (80 * x) + (80 *n * X)
Sync Head 1 + (80 * x) + (80 *n * X) 0 + (80 * x) + (80 *n * X)

Section Content
Parallel Data Mapping Information
TX and RX Parallel Data Mapping Information for Different Configurations
Example of TX Parallel Data for PMA Width = 8, 10, 16, 20, 32 (X=1)
Example of TX Parallel Data for PMA width = 64 (X=2)
Example of TX Parallel Data for PMA width = 64 (X=2) for FEC Direct Mode

28 This section explains the bit mapping of TX and RX parallel data if the Provide separate interface for each PMA option is disabled. If the Provide separate interface for each PMA option is enabled, refer to the introduction of Signal and Port Reference to view the bit mapping differences.
29 Applicable only when using PMA clocking mode only and when TX/RX core FIFO is in elastic mode.
30 Applicable only when using System PLL clocking mode.
31 For all bonded configurations, all TX PMA Interface Data Valid bits must be asserted at the same cycle of tx_coreclkin clock.
32 Applicable only when using PAM4 and X=2 or 4
33 The two alignment markers in this table must be driven together by the same signal.
34 Applicable only when using NRZ/PAM4 when X=2 or 4 or N > 1
35 Only one per system
Level Two Title