Visible to Intel only — GUID: ygl1474502326457
Ixiasoft
1.1. Reference Design Overview
1.2. Getting Started
1.3. Reference Design Components
1.4. Compiling the Reference Design
1.5. Testing the Reference Design
1.6. Extending the Reference Design with Custom Persona
1.7. Document Revision History for AN 784: Partial Reconfiguration over PCI Express* Reference Design for Intel® Arria® 10 Devices
Visible to Intel only — GUID: ygl1474502326457
Ixiasoft
1.2.1. Hardware and Software Requirements
The reference design requires and uses the following hardware and software tools:
- Intel® Arria® 10 GX FPGA development board with the DDR4 module connected to Hi-Lo interface
- Linux Operating System - kernel version 3.10 or above
- Super user access on the host machine
- PCIe* slot to plug-in the Intel® Arria® 10 GX FPGA development board
- Open source driver for this PR over PCIe* reference design
- Intel® Quartus® Prime Pro Edition software v.18.1
- Intel® FPGA Download Cable driver
Note:
- Validation testing used CentOS 7 to test the open source driver for this PR over PCIe* reference design.
- The Linux driver accompanying this reference design is not a production driver. You must adapt this driver based on your design.