F-Tile Ethernet Intel® FPGA Hard IP Design Example User Guide

Download PDF
ID 683804
Date 6/20/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. Design Example: Single IP Core Instantiation 3. Design Example: Single IP Core Instantiation with Precision Time Protocol 4. Design Example: Single IP Core Instantiation with Auto-Negotiation and Link Training 5. Design Example: Multiple IP Core Instantiation 6. F-Tile Ethernet Intel® FPGA Hard IP Design Example User Guide Archives 7. Document Revision History for the F-Tile Ethernet Intel FPGA Hard IP Design Example User Guide
1. Quick Start Guide x
1.1. Generating the Design 1.2. Directory Structure 1.3. Generating Tile Files 1.4. Simulating the Design Example Testbench 1.5. Hardware and Software Requirements 1.6. Compiling and Configuring the Design Example in Hardware 1.7. Testing the F-Tile Ethernet Intel FPGA Hard IP Hardware Design Example 1.8. Register Maps
1.1. Generating the Design x
1.1.1. Generating Single IP Instance Design 1.1.2. Generating Multiple IP Instance Design
1.4. Simulating the Design Example Testbench x
1.4.1. Fast Sim Model for FGT Variants
2. Design Example: Single IP Core Instantiation x
2.1. Features 2.2. Functional Description 2.3. Simulation 2.4. Packet Client Registers
2.2. Functional Description x
2.2.1. Variation: F-Tile Ethernet Intel FPGA Hard IP with FHT PMA
2.3. Simulation x
2.3.1. Simulation Testbench Flow for MAC Mode 2.3.2. Simulation Testbench Flow for PCS, OTN, and FlexE Modes
3. Design Example: Single IP Core Instantiation with Precision Time Protocol x
3.1. Features 3.2. Functional Description 3.3. Simulation 3.4. Hardware Design Example 3.5. Registers
4. Design Example: Single IP Core Instantiation with Auto-Negotiation and Link Training x
4.1. Features 4.2. Functional Description 4.3. Simulation 4.4. QSF Assignments 4.5. Hardware Design Example
5. Design Example: Multiple IP Core Instantiation x
5.1. Features 5.2. Functional Description 5.3. Simulation
1. Quick Start Guide
2. Design Example: Single IP Core Instantiation
3. Design Example: Single IP Core Instantiation with Precision Time Protocol
4. Design Example: Single IP Core Instantiation with Auto-Negotiation and Link Training
5. Design Example: Multiple IP Core Instantiation
6. F-Tile Ethernet Intel® FPGA Hard IP Design Example User Guide Archives
7. Document Revision History for the F-Tile Ethernet Intel FPGA Hard IP Design Example User Guide

2.3.1. Simulation Testbench Flow for MAC Mode

The following steps show the simulation testbench flow for MAC mode:
  1. Assert global reset (i_rst_n) to reset the F-Tile Ethernet Intel FPGA Hard IP.
  2. Wait until resets acknowledgment. The o_rst_ack_n signal goes low.
  3. Deasserts the global reset.
  4. Wait until o_tx_lanes_stable bit is set to 1, indicating TX path is ready.
  5. Wait until o_rx_pcs_ready bit is set to 1, indicating RX path is ready.
  6. Read TX packet data information from 0x00 - 0x34 registers in sequential order.
    • 0x00: Set hw_pc_ctrl[6] = 1'b1 to enable snapshot bit to read the TX packet statistics.
    • 0x020/0x24: TX start of packet counter (LSB/MSB)
    • 0x28/0x2C: TX end of packet counter (LSB/MSB)
    • 0x30/0x34: TX error counter (LSB/MSB)
    • 0x00: Set hw_pc_ctrl[6] = 1'b0 to disable snapshot bit.
  7. Read RX packet data information from 0x38 - 0x4C registers in sequential order.
    • 0x00: Set hw_pc_ctrl[6] = 1'b1 to enable snapshot bit to read the RX packet statistics.
    • 0x38/0x3C: RX start of packet counter (LSB/MSB)
    • 0x40/0x44: RX end of packet counter (LSB/MSB)
    • 0x48/0x4C: RX error counter (LSB/MSB)
    • 0x00: Set hw_pc_ctrl[6] = 1'b0 to disable snapshot bit.
  8. Compare read counters to ensure 16 packets were sent and received.
  9. Instruct packet client to stop data transmission by writing hw_pc_ctrl[2:0]=3'b100 to stop the packet generator. Clear counters.
  10. Perform Avalon® memory-mapped interface test. Write and read Ethernet IP registers.
    • 0x104: Scratch register
    • 0x108: Ethernet IP soft reset register
    • 0x214: TX MAC source address register [31:0]
    • 0x218: TX MAC source address register [47:32]
    • 0x21C: RX MAC frame size register
  11. Perform Avalon® memory-mapped interface 2 test. Write and read transceiver registers.

The following sample output illustrates a successful simulation test run. 
---SRC IP sequence started -----
---SRC IP sequence TX completed -----
---SRC IP sequence RX completed -----
---Test    0;   ---Total     16 packets to send-----
------Start pkt gen TX-----
------Checking Packet TX/RX result-----
------------  16 packets Sent;     0 packets Received--------
------ALL   16  packets Sent out---
------------  16 packets Sent;    16 packets Received--------
------ALL   16  packets Received---
------TX/RX packet check OK---
****Starting AVMM Read/Write****
===>MATCH! ReaddataValid = 1 Readdata = abcdef01 Expected_Readdata = abcdef01 
===>MATCH! ReaddataValid = 1 Readdata = 00000007 Expected_Readdata = 00000007 
===>MATCH! ReaddataValid = 1 Readdata = 00000000 Expected_Readdata = 00000000 
===>MATCH! ReaddataValid = 1 Readdata = 9d228c3a Expected_Readdata = 9d228c3a 
===>MATCH! ReaddataValid = 1 Readdata = 4338b586 Expected_Readdata = 4338b586 
===>MATCH! ReaddataValid = 1 Readdata = deadc0de Expected_Readdata = deadc0de 
===>MATCH! ReaddataValid = 1 Readdata = deadc0de Expected_Readdata = deadc0de 
===>MATCH! ReaddataValid = 1 Readdata = 00000000 Expected_Readdata = 00000000 
===>MATCH! ReaddataValid = 1 Readdata = 22334455 Expected_Readdata = 22334455 
===>MATCH! ReaddataValid = 1 Readdata = 00000011 Expected_Readdata = 00000011 
===>MATCH! ReaddataValid = 1 Readdata = 000005ee Expected_Readdata = 000005ee 
===>MATCH! ReaddataValid = 1 Readdata = 01234567 Expected_Readdata = 01234567 
===>MATCH! ReaddataValid = 1 Readdata = 000089ab Expected_Readdata = 000089ab 
743830ns  Try to access AVMM2 begin...
743830ns  write 0x00000065 to xcvr  0 address 0x103c004
744795ns  Try to access AVMM2 end...
744890ns  read from address 0x103c004
====>MATCH!     ReaddataValid = 1 Readdata = 00000065 Expected_Readdata = 00000065 

...

758740ns  Try to access AVMM2 end...
758840ns  Try to access AVMM2 begin...
758840ns  write 0x0000006c to xcvr  7 address 0x103c00b
759825ns  Try to access AVMM2 end...
759920ns  read from address 0x103c00b
====>MATCH!     ReaddataValid = 1 Readdata = 0000006c Expected_Readdata = 0000006c 
760900ns  Try to access AVMM2 end...
**** AVMM Read/Write Operation Completed ****
** Testbench complete
**
Level Two Title