Visible to Intel only — GUID: vgo1401246888095
Ixiasoft
1. HDMI Intel® FPGA IP Quick Reference
2. HDMI Overview
3. HDMI Intel® FPGA IP Getting Started
4. HDMI Hardware Design Examples
5. HDMI Source
6. HDMI Sink
7. HDMI Parameters
8. HDMI Simulation Example
9. HDMI Intel® FPGA IP User Guide Archives
10. Document Revision History for the HDMI Intel® FPGA IP User Guide
4.3.1.1. Transceiver Native PHY (RX)
4.3.1.2. PLL Intel FPGA IP Cores
4.3.1.3. PLL Reconfig Intel FPGA IP Core
4.3.1.4. Multirate Reconfig Controller (RX)
4.3.1.5. Oversampler (RX)
4.3.1.6. DCFIFO
4.3.1.7. Sink Display Data Channel (DDC) & Status and Control Data Channel (SCDC)
4.3.1.8. Transceiver Reconfiguration Controller
4.3.1.9. VIP Bypass and Audio, Auxiliary and InfoFrame Buffers
4.3.1.10. Transceiver Native PHY (TX)
4.3.1.11. Transceiver PHY Reset Controller
4.3.1.12. Oversampler (TX)
4.3.1.13. Clock Enable Generator
4.3.1.14. Platform Designer System
5.1. Source Functional Description
5.2. Source Interfaces
5.3. Source Clock Tree
5.4. Link Training Procedure
5.5. FRL Clocking Scheme
5.6. Valid Video Data
5.7. Source Deep Color Implementation When Support FRL = 0
5.8. Source Deep Color Implementation When Support FRL = 1
5.9. Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM)
5.1.1. Source Scrambler, TMDS/TERC4 Encoder
5.1.2. Source Video Resampler
5.1.3. Source Window of Opportunity Generator
5.1.4. Source Auxiliary Packet Encoder
5.1.5. Source Auxiliary Packet Generators
5.1.6. Source Auxiliary Data Path Multiplexers
5.1.7. Source Auxiliary Control Port
5.1.8. Source Audio Encoder
5.1.9. HDCP 1.4 TX Architecture
5.1.10. HDCP 2.3 TX Architecture
5.1.11. FRL Packetizer
5.1.12. FRL Character Block and Super Block Mapping
5.1.13. Reed-Solomon (RS) Forward Error Correction (FEC) Generation and Insertion
5.1.14. FRL Scrambler and Encoder
5.1.15. Source FRL Resampler
5.1.16. TX Oversampler
5.1.17. Clock Enable Generator
5.1.18. I2C Master
6.1.1. Sink Word Alignment and Channel Deskew
6.1.2. Sink Descrambler, TMDS/TERC4 Decoder
6.1.3. Sink Auxiliary Decoder
6.1.4. Sink Auxiliary Packet Capture
6.1.5. Sink Video Resampler
6.1.6. Sink Auxiliary Data Port
6.1.7. Sink Audio Decoder
6.1.8. Status and Control Data Channel (SCDC) Interface
6.1.9. HDCP 1.4 RX Architecture
6.1.10. HDCP 2.3 RX Architecture
6.1.11. FRL Depacketizer
6.1.12. Sink FRL Character Block and Super Block Demapper
6.1.13. Sink FRL Descrambler and Decoder
6.1.14. Sink FRL Resampler
6.1.15. RX Oversampler
6.1.16. I2C Slave
6.1.17. I2C and EDID RAM Blocks
6.1.18. Variable Refresh Rate(VRR) and Auto Low Latency Mode (ALLM)
Visible to Intel only — GUID: vgo1401246888095
Ixiasoft
6.1.3. Sink Auxiliary Decoder
The sink core decodes the auxiliary data path into a 72-bit wide standard packet stream. The stream contains a valid, start-of-packet (SOP) and end-of-packet (EOP) marker.
Figure 48. Auxiliary Data Stream SignalThe figure below shows the relationship between the data bit-field and its clock cycle based on 1-, 2-, or 4-symbol per clock mode.
The data output at EOP contains the received BCH error correcting code. The sink core does not perform any error correction within the core. The auxiliary data is available outside the core.
Note: You can find the bit-field nomenclature in the HDMI 2.0b Specification.