AN 845: Signal Tap Tutorial for Intel® Arria® 10 Partial Reconfiguration Design

Download PDF
ID 683662
Date 1/28/2022
Public
Document Table of Contents
Document Table of Contents x
1. Tutorial Overview 2. Tutorial Walkthrough 3. Tutorial Results 4. Document Revision History for AN 845: Signal Tap Tutorial for Intel® Arria® 10 Partial Reconfiguration Design
1. Tutorial Overview x
1.1. PR Debug Considerations 1.2. Tutorial Software and Hardware Requirements 1.3. Tutorial Design Description 1.4. Downloading the Tutorial Design
1.4. Downloading the Tutorial Design x
1.4.1. Tutorial Design Files
2. Tutorial Walkthrough x
2.1. Step 1: Getting Started 2.2. Step 2: Preparing the Base Revision 2.3. Step 3: Preparing the Implementation Revisions for Debugging 2.4. Step 4: Configuring Signal Tap Logic Analyzer 2.5. Step 5: Generating Programming Files 2.6. Step 6: Programming the FPGA Device 2.7. Step 7: Performing Data Acquisition
2.2. Step 2: Preparing the Base Revision x
2.2.1. Preparing the Static Region 2.2.2. Preparing the Default PR Persona
2.4. Step 4: Configuring Signal Tap Logic Analyzer x
2.4.1. Tapping Signals in the Implementation Persona 2.4.2. Configuring Data Acquisition 2.4.3. Setting Trigger Conditions
2.4.2. Configuring Data Acquisition x
2.4.2.1. Add Acquisition Clock 2.4.2.2. Add Storage Parameters
3. Tutorial Results x
3.1. Waveforms for Slow Implementation 3.2. Waveforms for Default Implementation 3.3. Waveforms for Empty Implementation
1. Tutorial Overview
2. Tutorial Walkthrough
3. Tutorial Results
4. Document Revision History for AN 845: Signal Tap Tutorial for Intel® Arria® 10 Partial Reconfiguration Design

2.4. Step 4: Configuring Signal Tap Logic Analyzer

In this step, you configure Signal Tap Logic Analyzer for each revision.
Revision Signal Tap File Name
blinking_led_slow stp_slow.stp
blinking_led_default stp_default.stp
blinking_led_empty stp_empty.stp

Repeat the following steps for each revision:

  1. Set the current revision in the Intel® Quartus® Prime GUI.
  2. Open the Signal Tap file that corresponds to the set revision.
  3. Tap signals in the implementation persona.
  4. Configure data acquisition, including the acquisition clock and storage parameters.
  5. Set the trigger conditions for recording data.
  6. Save your changes before you continue to compiling the design.
Level Two Title