AN 845: Signal Tap Tutorial for Intel® Arria® 10 Partial Reconfiguration Design

Download PDF
ID 683662
Date 1/28/2022
Public
Document Table of Contents
Document Table of Contents x
1. Tutorial Overview 2. Tutorial Walkthrough 3. Tutorial Results 4. Document Revision History for AN 845: Signal Tap Tutorial for Intel® Arria® 10 Partial Reconfiguration Design
1. Tutorial Overview x
1.1. PR Debug Considerations 1.2. Tutorial Software and Hardware Requirements 1.3. Tutorial Design Description 1.4. Downloading the Tutorial Design
1.4. Downloading the Tutorial Design x
1.4.1. Tutorial Design Files
2. Tutorial Walkthrough x
2.1. Step 1: Getting Started 2.2. Step 2: Preparing the Base Revision 2.3. Step 3: Preparing the Implementation Revisions for Debugging 2.4. Step 4: Configuring Signal Tap Logic Analyzer 2.5. Step 5: Generating Programming Files 2.6. Step 6: Programming the FPGA Device 2.7. Step 7: Performing Data Acquisition
2.2. Step 2: Preparing the Base Revision x
2.2.1. Preparing the Static Region 2.2.2. Preparing the Default PR Persona
2.4. Step 4: Configuring Signal Tap Logic Analyzer x
2.4.1. Tapping Signals in the Implementation Persona 2.4.2. Configuring Data Acquisition 2.4.3. Setting Trigger Conditions
2.4.2. Configuring Data Acquisition x
2.4.2.1. Add Acquisition Clock 2.4.2.2. Add Storage Parameters
3. Tutorial Results x
3.1. Waveforms for Slow Implementation 3.2. Waveforms for Default Implementation 3.3. Waveforms for Empty Implementation
1. Tutorial Overview
2. Tutorial Walkthrough
3. Tutorial Results
4. Document Revision History for AN 845: Signal Tap Tutorial for Intel® Arria® 10 Partial Reconfiguration Design

2.4.3. Setting Trigger Conditions

Direct the Signal Tap Logic Analyzer to record data only after u_blinking_led|led_three_on or u_blinking_led|led_two_on does a rising edge transition:

To set trigger conditions for the current revision:

  1. In the Setup tab of the Signal Tap Logic Analyzer window, turn on the box under the Trigger Condition column
  2. Open the drop-down menu and select Basic OR.
  3. For u_blinking_led|led_three_on and u_blinking_led|led_two_on, turn on Trigger Enable and select Rising Edge as the trigger type.
  4. For all the other signals, turn off Trigger Enable.
Figure 22. Trigger Conditions

Defining trigger conditions completes the Signal Tap instance configuration.

Save your changes before you continue to compiling the design.

Level Two Title