AN 904: Intel® MAX® 10 Hitless Update Implementation Guidelines

Download PDF
ID 683380
Date 5/26/2023
Public
Document Table of Contents
Document Table of Contents x
1. Intel® MAX® 10 Hitless Update Implementation Guidelines
1. Intel® MAX® 10 Hitless Update Implementation Guidelines x
1.1. Introduction 1.2. Types of Intel® MAX® 10 Design Update Flow 1.3. Stages of Intel® MAX® 10 Hitless Update Flow 1.4. Intel® MAX® 10 Hitless Update Requirement and Limitation 1.5. Hitless Update using Intel® Quartus® Prime Programmer 1.6. Hitless Update using Intel® Jam STAPL Byte-Code Player 1.7. Hitless Update Using Self-Developed Algorithm 1.8. Boundary-Scan Pattern Configuration Bit Location 1.9. JTAG Instructions 1.10. Sample of Hitless Update Algorithm in Jam Format 1.11. Document Revision History for AN 904: Intel® MAX® 10 Hitless Update Implementation Guidelines
1.5. Hitless Update using Intel® Quartus® Prime Programmer x
1.5.1. Creating IPS File 1.5.2. Executing IPS File
1.6. Hitless Update using Intel® Jam STAPL Byte-Code Player x
1.6.1. Generating .jam/.jbc File 1.6.2. Interpreting Jam File Information using Jam Player
1.7. Hitless Update Using Self-Developed Algorithm x
1.7.1. Custom Algorithm Implementation Flow for Intel® MAX® 10 Devices with SC/SA/SL/DC/DF/DA Feature Options 1.7.2. Custom Algorithm Implementation Flow for Intel® MAX® 10 Devices with DD Feature Option
1. Intel® MAX® 10 Hitless Update Implementation Guidelines

1.5.2. Executing IPS File

To execute ISP Clamp, perform the following steps:

  1. In the Intel® Quartus® Prime Programmer, select the .pof necessary to program to the device.
  2. Select the .pof, right click and select Add IPS File and turn-on ISP CLAMP.
    Note: You can change the start-up delay of the I/O Clamp after configuration. To do this, select Tools > Options, turn on the Overwrite MAX10 configuration start up delay when using IO Clamp in Programmer option, and change the delay value accordingly.
  3. Select the .pof in the Program/Configure column.
    Note: For third party programming, you can generate the .jam or .jbc file from the .pof file with .ips file.
  4. After you configure the required settings, click Start to start programming.
Level Two Title