25G Ethernet Stratix® 10 Intel® FPGA IP User Guide

ID 683154
Date 6/20/2024
Public
Document Table of Contents

6.8. Miscellaneous Status and Debug Signals

The miscellaneous status and debug signals are asynchronous.
Table 22.  Miscellaneous Status and Debug Signals

Signal

Direction

Description

tx_lanes_stable Output Asserted when all TX lanes are stable and ready to transmit data.
rx_block_lock Output

Signal is asserted when 64B/66B sync header is found consecutively for at least 64 clock cycles by the RX PCS.

rx_am_lock Output

If you turn on Enable RS-FEC in the parameter editor, this signal is asserted when alignment marker lock status is achieved.

If you turn off Enable RS-FEC in the parameter editor, this signal behaves the same as the rx_block_lock signal.

rx_pcs_ready Output

Signal is asserted when rx_block_lock is asserted.

local_fault_status Output Asserted when the RX MAC detects a local fault. This signal is available if you turn on Enable link fault generation in the parameter editor.
remote_fault_status Output Asserted when the RX MAC detects a remote fault. This signal is available if you turn on Enable link fault generation in the parameter editor.
unidirectional_en Output Asserted if the IP core includes Clause 66 for unidirectional support. This signal is available if you turn on Enable link fault generation in the parameter editor.
link_fault_gen_en Output Asserted if the IP core includes Clause 66 for unidirectional support. This signal is available if you turn on Enable link fault generation in the parameter editor.