Intel® Quartus® Prime Pro Edition User Guide: Design Constraints

Download PDF
ID 683143
Date 4/03/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Answers to Top FAQs 2. Constraining Designs 3. Interface Planning 4. Managing Device I/O Pins 5. Intel® Quartus® Prime Pro Edition User Guide: Design Constraints Document Archives A. Intel® Quartus® Prime Pro Edition User Guides
2. Constraining Designs x
2.1. Specifying Design Constraints Designs in the GUI 2.2. Constraining Designs with Tcl Scripts 2.3. A Fully Iterative Scripted Flow 2.4. Constraining Designs Revision History
2.1. Specifying Design Constraints Designs in the GUI x
2.1.1. Global Constraints and Assignments 2.1.2. Node, Entity, and Instance-Level Constraints 2.1.3. Probing Between Components of the Intel® Quartus® Prime GUI 2.1.4. Specifying Timing Constraints in the GUI
2.1.2. Node, Entity, and Instance-Level Constraints x
2.1.2.1. Specify Instance-Specific Constraints in Assignment Editor 2.1.2.2. Specify NoC Constraints in NoC Assignment Editor 2.1.2.3. Specify I/O Constraints in Pin Planner 2.1.2.4. Plan Interface Constraints in Interface Planner and Tile Interface Planner 2.1.2.5. Adjust Constraints with the Chip Planner 2.1.2.6. Constraining Designs with the Design Partition Planner
2.1.2.1. Specify Instance-Specific Constraints in Assignment Editor x
2.1.2.1.1. Specifying Multi-Dimensional Bus Constraints
2.1.2.2. Specify NoC Constraints in NoC Assignment Editor x
2.1.2.2.1. NoC Assignment Editor Interface Controls
2.2. Constraining Designs with Tcl Scripts x
2.2.1. Create a Project and Apply Constraints 2.2.2. Assigning a Pin 2.2.3. Generating Intel® Quartus® Prime Settings Files 2.2.4. Synopsys* Design Constraint (.sdc) Files 2.2.5. Tcl-only Script Flows
3. Interface Planning x
3.1. Using Interface Planner 3.2. Using Tile Interface Planner 3.3. Interface Planning Revision History
3.1. Using Interface Planner x
3.1.1. Interface Planner User Interface 3.1.2. Interface Planner General Tool Flow 3.1.3. Interface Planner NoC Tool Flow 3.1.4. Interface Planner Reports
3.1.1. Interface Planner User Interface x
3.1.1.1. Flow Controls 3.1.1.2. Home Tab Controls 3.1.1.3. Assignments Tab Controls 3.1.1.4. Plan Tab Controls 3.1.1.5. Reports Tab Controls
3.1.2. Interface Planner General Tool Flow x
3.1.2.1. Step 1: Setup and Synthesize the Project 3.1.2.2. Step 2: Initialize Interface Planner 3.1.2.3. Step 3: Update Plan with Project Assignments 3.1.2.4. Step 4: Plan Periphery Placement 3.1.2.5. Step 5: Report Placement Data 3.1.2.6. Step 6: Validate and Export Plan Constraints
3.1.2.4. Step 4: Plan Periphery Placement x
3.1.2.4.1. Plan Clock Networks 3.1.2.4.2. Saving & Loading Floorplans
3.1.3. Interface Planner NoC Tool Flow x
3.1.3.1. Placing NoC Design Elements Using Interface Planner
3.1.3.1. Placing NoC Design Elements Using Interface Planner x
3.1.3.1.1. Recommended Placement Order for NoC Elements in Interface Planner 3.1.3.1.2. High-Speed Interconnect NoC Locations in Interface Planner
3.1.4. Interface Planner Reports x
3.1.4.1. Report Summary 3.1.4.2. Report Pins 3.1.4.3. Report HSSI Channels 3.1.4.4. Report Clocks 3.1.4.5. Report Periphery Locations 3.1.4.6. Report Cell Connectivity 3.1.4.7. Report Instance Assignments 3.1.4.8. Report NoC Performance
3.2. Using Tile Interface Planner x
3.2.1. Tile Interface Planner Terminology 3.2.2. Tile Interface Planner Tool Flow 3.2.3. Constraining Dynamic Reconfiguration IP 3.2.4. Tile Interface Planner GUI Reference
3.2.2. Tile Interface Planner Tool Flow x
3.2.2.1. Step 1: Instantiate IP and Run Design Analysis 3.2.2.2. Step 2: Initialize Tile Interface Planner 3.2.2.3. Step 3: Update Plan with Project Assignments 3.2.2.4. Step 4: Create a Tile Plan 3.2.2.5. Step 5: Save Tile Plan Assignments 3.2.2.6. Step 6: Run Logic Generation and Design Synthesis
3.2.2.4. Step 4: Create a Tile Plan x
3.2.2.4.1. Placing IP Components 3.2.2.4.2. Constraining IP Building Blocks
3.2.3. Constraining Dynamic Reconfiguration IP x
3.2.3.1. Defining a Dynamic Reconfiguration Group 3.2.3.2. Assigning Dynamic Reconfiguration Group Placement
3.2.4. Tile Interface Planner GUI Reference x
3.2.4.1. Flow Controls 3.2.4.2. Home Tab 3.2.4.3. Assignments Tab Controls 3.2.4.4. Plan Tab Controls 3.2.4.5. Tcl Console Window
3.2.4.4. Plan Tab Controls x
3.2.4.4.1. Design Tree and Filters 3.2.4.4.2. Reconfiguration Groups View 3.2.4.4.3. Legal Locations Pane
4. Managing Device I/O Pins x
4.1. I/O Planning Overview 4.2. Assigning I/O Pins 4.3. Importing and Exporting I/O Pin Assignments 4.4. Validating Pin Assignments 4.5. Verifying I/O Timing 4.6. Viewing Routing and Timing Delays 4.7. Scripting API 4.8. Managing Device I/O Pins Revision History
4.1. I/O Planning Overview x
4.1.1. Basic I/O Planning Flow 4.1.2. Integrating PCB Design Tools 4.1.3. Intel Device Terms
4.2. Assigning I/O Pins x
4.2.1. Assigning to Exclusive Pin Groups 4.2.2. Assigning Slew Rate and Drive Strength 4.2.3. Assigning Differential Pins 4.2.4. Entering Pin Assignments with Tcl Commands 4.2.5. Entering Pin Assignments in HDL Code
4.2.3. Assigning Differential Pins x
4.2.3.1. Overriding I/O Placement Rules on Differential Pins
4.2.5. Entering Pin Assignments in HDL Code x
4.2.5.1. Using Low-Level I/O Primitives
4.3. Importing and Exporting I/O Pin Assignments x
4.3.1. Importing and Exporting for PCB Tools 4.3.2. Migrating Assignments to Another Target Device
4.4. Validating Pin Assignments x
4.4.1. I/O Assignment Validation Rules 4.4.2. I/O Assignment Analysis 4.4.3. Understanding I/O Analysis Reports
4.4.2. I/O Assignment Analysis x
4.4.2.1. Early I/O Assignment Analysis Without Design Files 4.4.2.2. I/O Assignment Analysis With Design Files 4.4.2.3. Overriding Default I/O Pin Analysis
4.5. Verifying I/O Timing x
4.5.1. Running Advanced I/O Timing 4.5.2. Adjusting I/O Timing and Power with Capacitive Loading
4.5.1. Running Advanced I/O Timing x
4.5.1.1. Board Trace Models 4.5.1.2. Defining the Board Trace Model 4.5.1.3. Modifying the Board Trace Model 4.5.1.4. Specifying Near-End vs Far-End I/O Timing Analysis 4.5.1.5. Advanced I/O Timing Analysis Reports
4.7. Scripting API x
4.7.1. Generate Mapped Netlist 4.7.2. Reserve Pins 4.7.3. Set Location 4.7.4. Exclusive I/O Group 4.7.5. Slew Rate and Current Strength
1. Answers to Top FAQs
2. Constraining Designs
3. Interface Planning
4. Managing Device I/O Pins
5. Intel® Quartus® Prime Pro Edition User Guide: Design Constraints Document Archives
A. Intel® Quartus® Prime Pro Edition User Guides

4.5. Verifying I/O Timing

You must verify board-level signal integrity and I/O timing when assigning I/O pins. High-speed interface operation requires a quality signal and low propagation delay at the far end of the board route. Click Tools > Timing Analyzer to confirm timing after making I/O pin assignments.

For example, if you change the slew rates or drive strengths of some I/O pins with ECOs, you can verify timing without recompiling the design. You must understand I/O timing and what factors affect I/O timing paths in your design. The accuracy of the output load specification of the output and bidirectional pins affects the I/O timing results.

The Intel® Quartus® Prime software supports three different methods of I/O timing analysis:

Table 35.  I/O Timing Analysis Methods

I/O Timing Analysis

Description

Advanced I/O timing analysis

Analyze I/O timing with your board trace model to report accurate, “board-aware” simulation models. Configures a complete board trace model for each I/O standard or pin. Timing Analyzer applies simulation results of the I/O buffer, package, and board trace model to generate accurate I/O delays and system level signal information. Use this information to improve timing and signal integrity.

I/O timing analysis

Analyze I/O timing with default or specified capacitive load without signal integrity analysis. Timing Analyzer reports tCO to an I/O pin using a default or user-specified value for a capacitive load.

Full board routing simulation

Use Intel-provided or Intel® Quartus® Prime software-generated IBIS or HSPICE I/O models for simulation in Mentor Graphics* HyperLynx* and Synopsys* HSPICE.

For more information about advanced I/O timing support, refer to the appropriate device handbook for your target device. For more information about board-level signal integrity and tips on how to improve signal integrity in your high-speed designs, refer to the Signal Integrity and Power Integrity – Support Center website.

For information about creating IBIS and HSPICE models with the Intel® Quartus® Prime software and integrating those models into HyperLynx* and HSPICE simulations, refer to the Signal Integrity Analysis with Third Party Tools chapter.


Section Content
Running Advanced I/O Timing
Adjusting I/O Timing and Power with Capacitive Loading

Related Information
Level Two Title