Visible to Intel only — GUID: kod1683045151861
Ixiasoft
1. About This Document
2. Agilex™ 5 Intel® Simics® Virtual Platforms
3. Agilex™ 5 Universal Virtual Platform Component Intel® Simics® Models
4. Running a Simulation with the Agilex™ 5 HPS Model
5. Supported Use Cases
6. Troubleshooting Issues When Migrating Software from Intel® Simics® to Hardware
A. Document Revision History for Intel Simics Simulator for Intel FPGAs Agilex 5 Virtual Platform User Guide
2.1.3.1. Boot-To-Operating System Prompt
2.1.3.2. Basic Ethernet
2.1.3.3. CPU Power-On and Boot Core Selection
2.1.3.4. Reset Flow
2.1.3.5. General Purpose I/O (GPIO) Loopback
2.1.3.6. USB Disks Hot-Plug Support
2.1.3.7. On-Chip Memory IP FPGA Fabric Example Design
2.1.3.8. FPGA-to-HPS Bridges
2.1.3.9. Exercising Peripheral Subsystem in FPGA Fabric Design
2.1.3.10. USB Controller Host/Device Mode Configuration
2.1.3.11. Agilex™ 5 HPS Component and Stepping Silicon Features Selection
Visible to Intel only — GUID: kod1683045151861
Ixiasoft
4.1. Prerequisites
Before simulating with the Agilex™ 5 HPS Model, ensure you have the Intel® Simics® Simulator for Intel® FPGAs software installed and configured according to the instructions in the Intel® Simics® Simulator for Intel® FPGAs User Guide.
Use the simics_intelfpga_cli command to identify available virtual platforms for the supported Intel® FPGA devices. For Agilex™ 5 devices, the main reference virtual platform corresponds to the Agilex™ 5 Universal Virtual Platform.
The following example code shows the output from the simics_intelfpga_cli command (run from the /home/simicsUser/IntelFPGA_InstallDir directory):
./simics/bin/simics_intelfpga_cli --list-platforms Intel(R) Simics(R) Simulator for Intel(R) FPGA CLI: INFO: Available platforms: INFO: agilex5e-universal