Agilex™ 7 M-Series FPGA Network-on-Chip (NoC) User Guide

Download PDF
ID 768844
Date 9/30/2024
Public
Document Table of Contents
Document Table of Contents x
Answers to Top FAQs 1. Network-on-Chip (NoC) Overview 2. Hard Memory NoC in Agilex™ 7 M-Series FPGAs 3. NoC Design Flow in Quartus® Prime Pro Edition 4. NoC Real-time Performance Monitoring 5. Simulating NoC Designs 6. NoC Power Estimation 7. Hard Memory NoC IP Reference 8. Document Revision History of Agilex™ 7 M-Series FPGA Network-on-Chip (NoC) User Guide
1. Network-on-Chip (NoC) Overview x
1.1. Introduction to Agilex™ 7 M-Series FPGAs 1.2. Terminology for Intel Agilex® 7 M-Series FPGAs 1.3. General NoC Architecture and Applications
1.3. General NoC Architecture and Applications x
1.3.1. General NoC Architecture 1.3.2. Example NoC Applications
1.3.2. Example NoC Applications x
1.3.2.1. Parallel Computing NoC Application 1.3.2.2. SmartNIC NoC Application
2. Hard Memory NoC in Agilex™ 7 M-Series FPGAs x
2.1. High-Level Architecture 2.2. NoC Segments 2.3. NoC Switch and Link Detail 2.4. Fabric NoC 2.5. NoC Protocol Support 2.6. NoC Design Considerations
2.2. NoC Segments x
2.2.1. UIB Segments 2.2.2. GPIO-B Segments 2.2.3. GPIO-B and HPS Segment 2.2.4. SDM Segment 2.2.5. PLL and SSM Segment
2.5. NoC Protocol Support x
2.5.1. AXI4 Protocol Support 2.5.2. AXI4 Handshaking Support 2.5.3. Quality of Service (QoS) Support 2.5.4. Transaction Ordering Support 2.5.5. AXI4-Lite Protocol Support
2.6. NoC Design Considerations x
2.6.1. Determining the Number of NoC Targets 2.6.2. Determining the Number of NoC Initiators 2.6.3. Fabric NoC Considerations 2.6.4. Latency Considerations 2.6.5. Initiator and Target Bandwidth Considerations 2.6.6. Horizontal Bandwidth Considerations 2.6.7. GPIO-B Bypass Mode and Initiators
3. NoC Design Flow in Quartus® Prime Pro Edition x
3.1. Hard Memory NoC Design Flow Overview 3.2. Using NoC Example Designs 3.3. NoC Building Blocks 3.4. Connecting NoC IP 3.5. Making NoC Logical Assignments 3.6. Making NoC Physical Assignments Using Interface Planner 3.7. Compiling the NoC Design
3.1. Hard Memory NoC Design Flow Overview x
3.1.1. NoC Design Flow Options
3.3. NoC Building Blocks x
3.3.1. NoC Initiators for Hard Processor Systems 3.3.2. NoC Targets for Hard Processor Systems 3.3.3. NoC Initiators for Fabric AXI4 Managers 3.3.4. NoC Targets for Fabric AXI4 Managers 3.3.5. NoC Clock Control
3.4. Connecting NoC IP x
3.4.1. General NoC IP Connectivity Guidelines 3.4.2. Connectivity Guidelines: NoC Initiators for Fabric AXI4 Managers 3.4.3. Connectivity Guidelines: NoC Targets for Fabric AXI4 Managers 3.4.4. Connectivity Guidelines: NoC Clock Control 3.4.5. Connectivity Guidelines: NoC Initiators for HPS 3.4.6. Connectivity Guidelines: NoC Targets for HPS
3.4.1. General NoC IP Connectivity Guidelines x
3.4.1.1. Connecting NoC IP and Assigning Base Addresses in the Platform Designer Connection Flow 3.4.1.2. Connecting NoC IP and Assigning Base Addresses in the NoC Assignment Editor Connection Flow
3.5. Making NoC Logical Assignments x
3.5.1. Creating NoC Assignments for Compilation 3.5.2. Using the NoC Assignment Editor 3.5.3. Troubleshooting NoC Assignment Editor 3.5.4. NoC Connection and Addressing Examples
3.5.2. Using the NoC Assignment Editor x
3.5.2.1. Step 1: Make Group Assignments in the NoC Assignment Editor 3.5.2.2. Step 2: Make Connection Assignments in the NoC Assignment Editor 3.5.2.3. Step 3: Make Attribute Assignments in the NoC Assignment Editor 3.5.2.4. Step 4: Validate Logical NoC Assignments and Generate Simulation File
3.5.4. NoC Connection and Addressing Examples x
3.5.4.1. Example 1: External Memory Interface with 1 AXI4 Initiator and 1 AXI4-Lite Initiator 3.5.4.2. Example 2: Two External Memory Interfaces with One AXI4 Initiator and One AXI4-Lite Initiator 3.5.4.3. Example 3: One External Memory Interfaces with Two AXI4 Initiators and One AXI4-Lite Initiator 3.5.4.4. Example 4: Two High-Bandwidth Memory Pseudo-Channels with Two AXI4 Initiators (Crossbar) and Shared AXI4-Lite Initiator 3.5.4.5. Example 5: Hard Processor System with Two External Memory Interfaces
3.5.4.1. Example 1: External Memory Interface with 1 AXI4 Initiator and 1 AXI4-Lite Initiator x
3.5.4.1.1. Example 1: Platform Designer Connection Flow 3.5.4.1.2. Example 1: NoC Assignment Editor Connection Flow
3.5.4.2. Example 2: Two External Memory Interfaces with One AXI4 Initiator and One AXI4-Lite Initiator x
3.5.4.2.1. Example 2: Platform Designer Connection Flow 3.5.4.2.2. Example 2: NoC Assignment Editor Connection Flow
3.5.4.3. Example 3: One External Memory Interfaces with Two AXI4 Initiators and One AXI4-Lite Initiator x
3.5.4.3.1. Example 3: Platform Designer Connection Flow 3.5.4.3.2. Example 3: NoC Assignment Editor Connection Flow
3.5.4.4. Example 4: Two High-Bandwidth Memory Pseudo-Channels with Two AXI4 Initiators (Crossbar) and Shared AXI4-Lite Initiator x
3.5.4.4.1. Example 4: Platform Designer Connection Flow 3.5.4.4.2. Example 4: NoC Assignment Editor Connection Flow
3.5.4.5. Example 5: Hard Processor System with Two External Memory Interfaces x
3.5.4.5.1. Example 5: Platform Designer Connection Flow 3.5.4.5.2. Example 5: NoC Assignment Editor Connection Flow
3.6. Making NoC Physical Assignments Using Interface Planner x
3.6.1. Using Interface Planner 3.6.2. Recommended Placement Order for NoC Elements in Interface Planner 3.6.3. Hard Memory NoC Locations in Interface Planner 3.6.4. NoC Performance Reports in Interface Planner
3.7. Compiling the NoC Design x
3.7.1. Fitter NoC Reports 3.7.2. Viewing NoC Elements in Chip Planner
5. Simulating NoC Designs x
5.1. Generating a Simulation Registration Include File (Platform Designer Connection Flow) 5.2. Generating a Simulation Registration Include File (NoC Assignment Editor Connection Flow) 5.3. Contents of Simulation Registration Include File
6. NoC Power Estimation x
6.1. Using the Intel FPGA PTC to Estimate NoC Power
7. Hard Memory NoC IP Reference x
7.1. NoC Initiator Intel FPGA IP 7.2. NoC Clock Control Intel FPGA IP
7.1. NoC Initiator Intel FPGA IP x
7.1.1. NoC Initiator Intel FPGA IP Parameters 7.1.2. NoC Initiator Intel FPGA IP Interfaces
7.1.2. NoC Initiator Intel FPGA IP Interfaces x
7.1.2.1. NoC Initiator Intel FPGA IP AXI4/AXI4-Lite Interfaces 7.1.2.2. NoC Initiator AXI4 User Interface Signals 7.1.2.3. NoC Initiator Intel FPGA IP AXI4-Lite User Interface Signals 7.1.2.4. NoC Initiator Intel FPGA IP Clock and Reset Signals 7.1.2.5. NoC Initiator Intel FPGA IP Platform Designer-Only Signals
7.2. NoC Clock Control Intel FPGA IP x
7.2.1. NoC Clock Control Intel FPGA IP Parameters 7.2.2. NoC Clock Control Intel FPGA IP Interfaces 7.2.3. NoC Clock Control Intel FPGA IP Platform Designer-only Signals
Answers to Top FAQs
1. Network-on-Chip (NoC) Overview
2. Hard Memory NoC in Agilex™ 7 M-Series FPGAs
3. NoC Design Flow in Quartus® Prime Pro Edition
4. NoC Real-time Performance Monitoring
5. Simulating NoC Designs
6. NoC Power Estimation
7. Hard Memory NoC IP Reference
8. Document Revision History of Agilex™ 7 M-Series FPGA Network-on-Chip (NoC) User Guide

3.1.1. NoC Design Flow Options

The Quartus® Prime software supports the following two flows for NoC design:
  • Platform Designer Connection Flow—you use Platform Designer to configure and instantiate your NoC-related IP. You also use Platform Designer to make connections between NoC initiator bridges and NoC target bridges and to define the addressing mapping for these connections. Once you generate HDL for your Platform Designer system, your design is ready for RTL simulation. You must use the NoC Assignment Editor to create additional assignments, such as specifying NoC groupings and optional performance targets. You can use Interface Planner to make physical location assignments for your NoC elements. Then you compile your design and review the results.
  • NoC Assignment Editor Connection Flow—you can configure and instantiate your NoC-related IP in either Platform Designer or directly in RTL. You then use the NoC Assignment Editor to make all NoC assignments including grouping, connectivity, address mapping, and optional performance targets. After completing the assignments and rerunning Analysis & Elaboration, your design is ready for RTL simulation. You can use Interface Planner to make physical location assignments for your NoC elements. Then compile your design and review the results.

The NoC design flow that you select impacts the NoC design entry method, how you specify NoC connectivity and addressing assignments, and at what stage you can perform RTL simulation of the NoC. Subsequent stages of the design flow, such as assigning physical locations, compiling, and reviewing results, are the same in both flows.

Table 5.  Comparison of Platform Designer Connection Flow and NoC Assignment Editor Connection Flow
Design Steps Platform Designer Connection Flow NoC Assignment Editor Connection Flow
Configure NoC-related IP Parameter Editor launched from Platform Designer Parameter Editor launched from either Platform Designer or IP Catalog
Instantiate NoC-related IP in your design Platform Designer only Either Platform Designer or directly in RTL
Connect NoC initiator bridges and NoC target bridges Platform Designer NoC Assignment Editor
Define address maps for NoC connections Platform Designer NoC Assignment Editor
Specify NoC grouping NoC Assignment Editor
Specify NoC performance targets NoC Assignment Editor
Assign physical locations Interface Planner
Compile design and review results Quartus® Prime Pro Edition
Ready for RTL simulation After generating HDL in Platform Designer After completing NoC Assignment Editor and running Analysis & Elaboration
Related Information
Level Two Title