Visible to Intel only — GUID: cgs1719152077577
Ixiasoft
1. About the RiscFree* IDE
2. Getting Started with the Ashling* RiscFree* IDE for Intel® FPGAs
3. Using Ashling* RiscFree* IDE for Intel® FPGAs with Nios® V Processor System
4. Using Ashling* RiscFree* IDE for Intel® FPGAs with Arm* Hard Processor System
5. Debugging Features with RiscFree* IDE for Intel® FPGAs
6. Debugging with Command-Line Interface
7. Ashling RiscFree* Integrated Development Environment (IDE) for Intel® FPGAs User Guide Archives
8. Document Revision History for the Ashling RiscFree* Integrated Development Environment (IDE) for Intel® FPGAs User Guide
A. Appendix
3.1. Importing Nios® V Processor Project
3.2. Building Nios® V Processor Project
3.3. Setting Run Configuration to Download Nios® V Processor Project
3.4. Setting Debug Configuration to Debug Nios® V Processor Project
3.5. Setting Debug Configuration to Debug a Booting Nios® V Processor Project
3.6. Debugging Tools
5.1. Debug Features in RiscFree* IDE
5.2. Processor System Debug
5.3. Heterogeneous Multicore Debug
5.4. Debugging µC/OS-II Application
5.5. Debugging FreeRTOS Application
5.6. Debugging Zephyr Application
5.7. Arm* HPS On-Chip Trace
5.8. Debugging the Arm* Linux Kernel
5.9. Debugging Target Software in an Intel® Simics Simulator Session
Visible to Intel only — GUID: cgs1719152077577
Ixiasoft
2.2.1.5. Configuring the FPGA
Before running your software, you must ensure the correct hardware design runs on the FPGA. To configure the FPGA, use the Quartus® Prime Programmer from the Quartus® Prime software.
The project directory for your hardware design contains an SRAM Object File (.sof) and the .qsys file. The .sof file contains the hardware design to be programmed in the FPGA.