F-Tile Dynamic Reconfiguration Design Example User Guide

ID 710582
Date 8/17/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.1. Ethernet to CPRI Design Example: Functional Description

This section supports the following configurations:
Table 17.  Supported Design Example Variants for Ethernet to CPRI Protocol Design Example
Base Variant (Startup IP/Mode) Dynamic Reconfiguration Variants
Ethernet 25G with RS-FEC 25G Ethernet with RS-FEC
10G Ethernet
24G CPRI with RS-FEC
10G CPRI
9.8G CPRI
4.9G CPRI
2.4G CPRI
Ethernet 25G-1 with RS-FEC (with 1GE) 25G Ethernet with RS-FEC
10G Ethernet
1G Ethernet
24G CPRI with RS-FEC
10G CPRI
9.8G CPRI
4.9G CPRI
2.4G CPRI
Note: The Ethernet to CPRI Protocol Design Example demonstrates a total of 8 Dynamic Reconfiguration variants. However, conceptually, you can also perform dynamic reconfiguration switching between Ethernet mode to any other F-Tile CPRI PHY Intel FPGA IP core supported mode that are not listed in the table (for example, 12G CPRI RS-FEC or 6G CPRI).