1G/2.5G/5G/10G Multi-rate Ethernet PHY Intel® Stratix® 10 FPGA IP User Guide

Download PDF
ID 683876
Date 11/15/2021
Public
Document Table of Contents
Document Table of Contents x
1. About the 1G/2.5G/5G/10G Multi-rate Ethernet PHY Intel® FPGA IP Core 2. Getting Started 3. Parameter Settings 4. Functional Description 5. Configuration Registers 6. Interface Signals 7. 1G/2.5G/5G/10G Multi-rate Ethernet PHY Intel® Stratix® 10 FPGA IP User Guide Archives A. Document Revision History for the 1G/2.5G/5G/10G Multi-rate Ethernet PHY Intel® Stratix® 10 FPGA IP User Guide
1. About the 1G/2.5G/5G/10G Multi-rate Ethernet PHY Intel® FPGA IP Core x
1.1. Features 1.2. Device Family Support 1.3. Device Speed Grade Support 1.4. Resource Utilization 1.5. Release Information
2. Getting Started x
2.1. Installing and Licensing Intel® FPGA IP Cores 2.2. Specifying the IP Core Parameters and Options 2.3. Generated File Structure 2.4. Integrating Your IP Core in Your Design
2.1. Installing and Licensing Intel® FPGA IP Cores x
2.1.1. Intel® FPGA IP Evaluation Mode
2.4. Integrating Your IP Core in Your Design x
2.4.1. Pin Assignments 2.4.2. Adding the Transceiver PLL 2.4.3. Adding the Intel® Stratix® 10 Transceiver PHY Reset Controller
4. Functional Description x
4.1. Clocking and Reset Sequence 4.2. Timing Constraints 4.3. Switching Operation Speed
5. Configuration Registers x
5.1. Register Map 5.2. Register Definitions
6. Interface Signals x
6.1. Clock and Reset Signals 6.2. Transceiver Mode and Operating Speed Signals 6.3. Serial Interface Signals 6.4. GMII Signals 6.5. XGMII Signals 6.6. Avalon® -MM Interface Signals 6.7. Transceiver Status and Reconfiguration Signals 6.8. Status Signals
1. About the 1G/2.5G/5G/10G Multi-rate Ethernet PHY Intel® FPGA IP Core
2. Getting Started
3. Parameter Settings
4. Functional Description
5. Configuration Registers
6. Interface Signals
7. 1G/2.5G/5G/10G Multi-rate Ethernet PHY Intel® Stratix® 10 FPGA IP User Guide Archives
A. Document Revision History for the 1G/2.5G/5G/10G Multi-rate Ethernet PHY Intel® Stratix® 10 FPGA IP User Guide

2.3. Generated File Structure

The Intel® Quartus® Prime Pro Edition software generates the following IP core output file structure.
Figure 3. IP Core Generated Files
Table 8.  IP Core Generated Files

File Name

Description

<your_ip>.ip

The Platform Designer system or top-level IP variation file. <your_ip> is the name that you give your IP variation.

<your_ip>.cmp The VHDL Component Declaration (.cmp) file is a text file that contains local generic and port definitions that you can use in VHDL design files.

This IP core does not support VHDL. However, the Intel® Quartus® Prime Pro Edition software generates this file.

<your_ip>.html

A report that contains connection information, a memory map showing the address of each slave with respect to each master to which it is connected, and parameter assignments.

<your_ip>_generation.rpt IP or Platform Designer generation log file. A summary of the messages during IP generation.
<your_ip>.qgsimc Lists simulation parameters to support incremental regeneration.
<your_ip>.qgsynthc Lists synthesis parameters to support incremental regeneration.
<your_ip>.qip

Contains all the required information about the IP component to integrate and compile the IP component in the Intel® Quartus® Prime software.

<your_ip>.sopcinfo

Describes the connections and IP component parameterizations in your Platform Designer system. You can parse its contents to get requirements when you develop software drivers for IP components.

Downstream tools such as the Nios® II tool chain use this file. The .sopcinfo file and the system.h file generated for the Nios® II tool chain include address map information for each slave relative to each master that accesses the slave. Different masters may have a different address map to access a particular slave component.

<your_ip>.csv Contains information about the upgrade status of the IP component.

<your_ip>.bsf

A Block Symbol File (.bsf) representation of the IP variation for use in Intel® Quartus® Prime Block Diagram Files (.bdf).

<your_ip>.spd

Required input file for ip-make-simscript to generate simulation scripts for supported simulators. The .spd file contains a list of files generated for simulation, along with information about memories that you can initialize.

<your_ip>.ppf The Pin Planner File (.ppf) stores the port and node assignments for IP components created for use with the Pin Planner.
<your_ip>_bb.v You can use the Verilog black-box (_bb.v) file as an empty module declaration for use as a black box.
<your_ip>_inst.v or _inst.vhd HDL example instantiation template. You can copy and paste the contents of this file into your HDL file to instantiate the IP variation.

This IP core does not support VHDL. However, the Intel® Quartus® Prime Pro Edition software generates the _inst.vhd file.

<your_ip>.v HDL files that instantiate each submodule or child IP core for synthesis or simulation.
mentor/

Contains a ModelSim* script msim_setup.tcl to set up and run a simulation.

aldec/

Contains a Riviera-PRO* script rivierapro_setup.tcl to setup and run a simulation.

ls

synopsys/vcs/

synopsys/vcsmx/

Contains a shell script vcs_setup.sh to set up and run a VCS* simulation.

Contains a shell script vcsmx_setup.sh and synopsys_ sim.setup file to set up and run a VCS MX* simulation.

cadence/

Contains a shell script ncsim_setup.sh and other setup files to set up and run an NCSim* simulation.

submodules/ Contains HDL files for the IP core submodules.
<child IP cores>/ For each generated child IP core directory, Platform Designer generates synth/ and sim/ sub-directories.
Level Two Title