F-tile Architecture and PMA and FEC Direct PHY IP User Guide

ID 683872
Date 10/15/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.11.6. Logical Avalon® Memory-Mapped Port Indexing

This section explains how to access the FGT PMA lanes if your design has more than four FGT PMA lanes that span across multiple FGT quads, or if you place the FGT PMA lane across different FGT quads. You need to know how to control the logical Avalon® memory-mapped port indexing if you are using the shared reconfiguration interface. (Enable separate Avalon interface per PMA = Off). The Logical Avalon® Memory-Mapped Port Indexing is only applicable for FGT PMA lanes and not for FHT PMA lanes.

If your design has the Enable separate Avalon interface per fracture = On feature enabled, each datapath and PMA Avalon® memory-mapped interface has its own reconfiguration interface and you can directly access the port’s register address without following the logical port indexing instruction explained in this section.

The reconfiguration address bus for one PMA lane in the F-Tile PMA/FEC Direct PHY Intel® FPGA IP is:
  • 14 bits for the datapath Avalon memory-mapped reconfiguration interface (reconfig_pdp_address[13:0])
  • 18 bits for the PMA Avalon memory-mapped reconfiguration interface (reconfig_xcvr_address[17:0])

The reconfiguration address space grows as a function of the following equation:

log2(N)

(where N = number of lanes), for an increase in the number of PMA lanes. The additional MSB bits of the reconfiguration address bus represent the logical Avalon® memory-mapped port index value. Refer to Table 79 and Table 80 for more information.

Note: When you Enable RS-FEC mode, the reconfig_pdp_address bus width does not increase for the datapath Avalon® memory-mapped reconfiguration interface. Refer to Table 1 for more information about the Kd and Kp formula and the MSB bits for the logical Avalon® memory-mapped port indexing information.

For example, if you enable 16 PMA lanes in your design, for the PMA Avalon® memory-mapped interface, the total reconfiguration address bus is reconfig_xcvr_address[21:0]. The PMA Avalon® memory-mapped interfaces MSB address bits (reconfig_xcvr_address[21:18]) provide the logical mapping to access different lanes and quads based on the number of PMA lanes. The 4 additional MSB address bits (reconfig_xcvr_address[21:18]) are a logical representation of the PMA Avalon® memory-mapped interface port. You can use them to read or write to the individual PMA Avalon® memory-mapped interface defined within the F-Tile PMA/FEC Direct PHY Intel® FPGA IP. The following table shows the MSB address bits for PMA logical Avalon® memory-mapped port indexing with the number of PMA lanes configured in the F-Tile PMA/FEC Direct PHY Intel® FPGA IP.

Table 79.  MSB Address Bits for PMA Logical Avalon® Memory-Mapped Reconfiguration Port Index Value
PMA Lane Set in GUI(s) Reconfiguration Address Bus MSB Address Bits for PMA Logical Avalon® Memory-Mapped Port Indexing PMA Logical Avalon® Memory-Mapped Port Indexing (value=hex)
1 reconfig_xcvr_address[17:0] Not Applicable 0
2 reconfig_xcvr_address[18:0] [18] 0,1
4 reconfig_xcvr_address[19:0] [19:18] 0,1,2,3
6, 8 reconfig_xcvr_address[20:0] [20:18] 0,1,2,3,4,5,6,7
12, 16 reconfig_xcvr_address[21:0] [21:18] 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F

Similarly, the datapath Avalon® memory-mapped interface's MSB address bits (reconfig_pdp_address[17:14]) provide the logical mapping to access different lanes and quads based on the number of PMA lanes. The datapath Avalon® memory-mapped interfaces MSB address bits (reconfig_pdp_address[17:14]) are a logical representation of the datapath Avalon® memory-mapped interface port. You can use them to read or write to the individual datapath Avalon® memory-mapped interface ports defined within the F-Tile PMA/FEC Direct PHY Intel® FPGA IP. The following table shows the MSB address bits for datapath logical Avalon® memory-mapped port indexing with the number of PMA lanes configured in the F-Tile PMA/FEC Direct PHY Intel® FPGA IP.

Table 80.  MSB Address Bits for Datapath Logical Avalon® Memory-Mapped Reconfiguration Port Index Value
PMA Lane Set in GUI(s) Reconfiguration Address Bus MSB Address Bits for Datapath Logical Avalon® Memory-Mapped Port Indexing Datapath Logical Avalon® Memory-Mapped Port Indexing (value= hex)
1 reconfig_pdp_address[13:0] Not Applicable 0
2 reconfig_pdp_address[14:0] [14] 0,1
4 reconfig_pdp_address[15:0] [15:14] 0,1,2,3
6, 8 reconfig_pdp_address[16:0] [16:14] 0,1,2,3,4,5,6,7
12, 16 reconfig_pdp_address[17:0] [17:14] 0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F
The following table shows the datapath and PMA logical Avalon® memory-mapped port index value and the offset address for FGT PMA registers. Add the additional MSB address bits [3:0] to the 20-bit register offset address [19:0] to control the different PMA lanes in your design. For example:
  • If the Avalon® memory-mapped port index value = 0x0 and the offset address is 0x48000. You write to 0x048000.
  • If the Avalon® memory-mapped port index value = 0x2 and the offset address is 0x58000. You write to 0x258000.
Table 81.  Datapath and PMA Logical Avalon® Memory-Mapped Port Index and PMA Offset Address Register Value
Quad Lane Datapath and PMA Logical Avalon® Memory-Mapped Port Index [3:0] Offset Address
0 0 0x0 0x40000
1 0x1 0x48000
2 0x2 0x50000
3 0x3 0x58000
1 0 0x4 0x40000
1 0x5 0x48000
2 0x6 0x50000
3 0x7 0x58000
2 0 0x8 0x40000
1 0x9 0x48000
2 0xA 0x50000
3 0xB 0x58000
3 0 0xC 0x40000
1 0xD 0x48000
2 0xE 0x50000
3 0xF 0x58000