Visible to Intel only — GUID: dsk1548729193252
Ixiasoft
1. Agilex™ 7 FPGA F-Series and I-Series Clocking and PLL Overview
2. F-Series and I-Series Clocking and PLL Architecture and Features
3. F-Series and I-Series Clocking and PLL Design Considerations
4. Clock Control Intel® FPGA IP Core
5. IOPLL Intel® FPGA IP Core
6. IOPLL Reconfig Intel® FPGA IP Core
7. Agilex™ 7 Clocking and PLL User Guide: F-Series and I-Series Archives
8. Document Revision History for the Agilex™ 7 Clocking and PLL User Guide: F-Series and I-Series
2.2.1. PLL Features
2.2.2. PLL Usage
2.2.3. PLL Locations
2.2.4. PLL Architecture
2.2.5. PLL Control Signals
2.2.6. PLL Feedback Modes
2.2.7. Clock Multiplication and Division
2.2.8. Programmable Phase Shift
2.2.9. Programmable Duty Cycle
2.2.10. PLL Cascading
2.2.11. PLL Input Clock Switchover
2.2.12. PLL Reconfiguration and Dynamic Phase Shift
2.2.13. PLL Calibration
3.1. Guidelines: Clock Switchover
3.2. Guidelines: Timing Closure
3.3. Guidelines: Resetting the PLL
3.4. Guidelines: Configuration Constraints
3.5. Guidelines: I/O PLL Reconfiguration
3.6. Clocking Constraints
3.7. IP Core Constraints
3.8. Guideline: Achieving 5% Duty Cycle for fOUT_EXT ≥ 300 MHz Using tx_outclk Port from LVDS SERDES Intel® FPGA IP
6.1. Release Information for IOPLL Reconfig Intel® FPGA IP
6.2. Implementing I/O PLL Reconfiguration in the IOPLL Reconfig IP Core
6.3. IOPLL Reconfig IP Core Reconfiguration Modes
6.4. Avalon® Memory-Mapped Interface Ports in the IOPLL Reconfig IP Core
6.5. Address Bus and Data Bus Settings
6.6. Design Example
Visible to Intel only — GUID: dsk1548729193252
Ixiasoft
2.2.5.2. Locked
The locked signal port of the IP core for the I/O PLL is locked.
The lock detection circuit provides a signal to the core logic. The signal indicates when the feedback clock locks onto the reference clock both in phase and frequency.
PLL loses lock if the input reference clock stops toggling. When PLL loses lock, the output of the PLL starts drifting out of the desired frequency. The downstream logic must be held inactive when PLL has lost lock.