Visible to Intel only — GUID: pmw1548749601810
Ixiasoft
1. Agilex™ 7 FPGA F-Series and I-Series Clocking and PLL Overview
2. F-Series and I-Series Clocking and PLL Architecture and Features
3. F-Series and I-Series Clocking and PLL Design Considerations
4. Clock Control Intel® FPGA IP Core
5. IOPLL Intel® FPGA IP Core
6. IOPLL Reconfig Intel® FPGA IP Core
7. Agilex™ 7 Clocking and PLL User Guide: F-Series and I-Series Archives
8. Document Revision History for the Agilex™ 7 Clocking and PLL User Guide: F-Series and I-Series
2.2.1. PLL Features
2.2.2. PLL Usage
2.2.3. PLL Locations
2.2.4. PLL Architecture
2.2.5. PLL Control Signals
2.2.6. PLL Feedback Modes
2.2.7. Clock Multiplication and Division
2.2.8. Programmable Phase Shift
2.2.9. Programmable Duty Cycle
2.2.10. PLL Cascading
2.2.11. PLL Input Clock Switchover
2.2.12. PLL Reconfiguration and Dynamic Phase Shift
2.2.13. PLL Calibration
3.1. Guidelines: Clock Switchover
3.2. Guidelines: Timing Closure
3.3. Guidelines: Resetting the PLL
3.4. Guidelines: Configuration Constraints
3.5. Guidelines: I/O PLL Reconfiguration
3.6. Clocking Constraints
3.7. IP Core Constraints
3.8. Guideline: Achieving 5% Duty Cycle for fOUT_EXT ≥ 300 MHz Using tx_outclk Port from LVDS SERDES Intel® FPGA IP
6.1. Release Information for IOPLL Reconfig Intel® FPGA IP
6.2. Implementing I/O PLL Reconfiguration in the IOPLL Reconfig IP Core
6.3. IOPLL Reconfig IP Core Reconfiguration Modes
6.4. Avalon® Memory-Mapped Interface Ports in the IOPLL Reconfig IP Core
6.5. Address Bus and Data Bus Settings
6.6. Design Example
Visible to Intel only — GUID: pmw1548749601810
Ixiasoft
3.2. Guidelines: Timing Closure
For timing closure, refer to the following guidelines:
- Reconfiguring a PLL's counter and loop filter settings changes both the output frequency and the clock uncertainty of that I/O PLL. Dynamic phase shift only affects the output clock phase.
- The Quartus® Prime Timing Analyzer performs timing analysis for the initial PLL settings only. You must verify that your design closes timing after dynamic reconfiguration or dynamic phase shift.
- Intel recommends compiling the I/O PLL designs with each intended configuration setting to determine the variation in the clock with the I/O PLL settings.