Low Latency E-Tile 40G Ethernet Intel® FPGA IP Design Example User Guide

Download PDF
ID 683747
Date 6/22/2020
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. Design Example Description A. Low Latency E-Tile 40G Ethernet Intel FPGA IP Archives 3. Document Revision History for Low Latency E-tile 40G Ethernet Design Example User Guide
1. Quick Start Guide x
1.1. Generating the Design Example 1.2. Directory Structure 1.3. Simulating the Design Example Testbench 1.4. Compiling and Configuring the Design Example in Hardware 1.5. Changing Target Device in Hardware Design Example 1.6. Testing the Low Latency E-Tile 40G Ethernet Intel® FPGA IP Design in Hardware
1.1. Generating the Design Example x
1.1.1. Design Example Parameters
2. Design Example Description x
2.1. Features 2.2. Hardware and Software Requirements 2.3. Functional Description 2.4. Simulation 2.5. Hardware Testing 2.6. Low Latency E-Tile 40G Ethernet Design Example Registers 2.7. Design Example Interface Signals
2.5. Hardware Testing x
2.5.1. Internal Loopback Test 2.5.2. External Loopback Test
1. Quick Start Guide
2. Design Example Description
A. Low Latency E-Tile 40G Ethernet Intel FPGA IP Archives
3. Document Revision History for Low Latency E-tile 40G Ethernet Design Example User Guide

1.4. Compiling and Configuring the Design Example in Hardware

The Intel® FPGA IP core parameter editor allows you to compile and configure the design example on a target development kit.
To compile and configure a design example on hardware, follow these steps:
  1. Launch the Intel® Quartus® Prime Pro Edition software and select Processing > Start Compilation to compile the design.
  2. After you generate an SRAM object file .sof, follow these steps to program the hardware design example on the Intel device:
    1. Select Tools > Programmer.
    2. In the Programmer, click Hardware Setup.
    3. Select a programming device.
    4. Select and add the Intel TX board to your Intel® Quartus® Prime Pro Edition session.
    5. Ensure that Mode is set to JTAG.
    6. Select the Intel device and click Add Device. The Programmer displays a block diagram of the connections between the devices on your board.
    7. In the row with your .sof, check the box for the .sof.
    8. Turn on Program/Configure option for the .sof.
    9. Click Start.
Related Information
Level Two Title