AN 717: Nios II Gen2 Hardware Development Tutorial

Download PDF
ID 683615
Date 9/22/2014
Public
Document Table of Contents
Document Table of Contents x
1. Hardware Development Tutorial
1. Hardware Development Tutorial x
1.1. Software and Hardware Requirements 1.2. 1.3. Design Example 1.4. System Development Flow 1.5. Creating the Design Example 1.6. Document Revision History
1.4. System Development Flow x
1.4.1. Analyzing System Requirements 1.4.2. Defining and Generating the System in 1.4.3. Integrating the System into the Project 1.4.4. Developing Software with the Software Build Tools for Eclipse 1.4.5. Running and Debugging Software on the Target Board 1.4.6. Varying the Development Flow
1.5. Creating the Design Example x
1.5.1. Install the Design Files 1.5.2. Analyze System Requirements 1.5.3. Start the Software and Open the Example Project 1.5.4. Create a New System 1.5.5. Define the System in 1.5.6. Integrate the System into the Project 1.5.7. Download the Hardware Design to the Target FPGA 1.5.8. Develop Software Using the SBT for Eclipse 1.5.9. Run the Program on Target Hardware
1.5.5. Define the System in x
1.5.5.1. Specify Target FPGA and Clock Settings 1.5.5.2. Add the On-Chip Memory 1.5.5.3. Add the Processor Core 1.5.5.4. Add the JTAG UART 1.5.5.5. Add the Interval Timer 1.5.5.6. Add the System ID Peripheral 1.5.5.7. Add the PIO 1.5.5.8. Specify Base Addresses and Interrupt Request Priorities 1.5.5.9. Generate the System
1.5.6. Integrate the System into the Project x
1.5.6.1. Instantiate the System Module in the Project 1.5.6.2. Add IP Variation File 1.5.6.3. Assign FPGA Device 1.5.6.4. Assign FPGA Pin Locations 1.5.6.5. Set Timing 1.5.6.6. Compile the Project and Verify Timing
1.5.8. Develop Software Using the SBT for Eclipse x
1.5.8.1. Create a New Application and BSP from Template 1.5.8.2. Compile the Project
1. Hardware Development Tutorial

1.5.8.1. Create a New Application and BSP from Template

To create new C/C++ application and BSP projects, perform the following steps:

  1. Start the SBT for Eclipse. On Windows computers, click Start, point to Programs, EDS <version>, and then click <version> Software Build Tools for Eclipse. On Linux computers, run the executable file < EDS install path>/bin/eclipse-nios2.
  2. If the Workspace Launcher dialog box appears, click OK to accept the default workspace location.
  3. On the Window menu, point to Open Perspective, and then either click , or click Other and then click to ensure you are using the perspective.
  4. On the File menu, point to New, and then click Application and BSP from Template.
    The Nios II Application and BSP from Template wizard appears.
  5. Under Target hardware information, next to SOPC Information File name, browse to locate the <design files directory>.
  6. Select first_nios2_system.sopcinfo and click Open.
    Nios II Application and BSP from Template wizard shows the current information for the SOPC Information File name and CPU name fields.
  7. In the Project name box, type count_binary.
  8. In the Templates list, select Count Binary
  9. Click Finish.
The SBT for Eclipse creates and displays the following new projects in the Project Explorer view, typically on the left side of the window:
  • count_binary—Your C/C++ application project
  • count_binary_bsp—A board support package that encapsulates the details of the system hardware
Level Two Title