Low Latency 100G Ethernet Stratix® 10 FPGA IP Design Example User Guide

Download PDF
ID 683505
Date 8/05/2024
Public
Document Table of Contents
Document Table of Contents x
1. Quick Start Guide 2. Design Example Description 3. Ethernet Toolkit Overview 4. Low Latency 100G Ethernet Intel Stratix 10 FPGA IP Design Example User Guide Archives 5. Document Revision History for the Low Latency 100G Ethernet Stratix® 10 FPGA IP Design Example User Guide
1. Quick Start Guide x
1.1. Directory Structure 1.2. Simulation Design Example Components 1.3. Hardware Design Example Components 1.4. Generating the Design 1.5. Simulating the Design Example Testbench 1.6. Compiling the Compilation-Only Project 1.7. Compiling and Configuring the Design Example in Hardware 1.8. Testing the Hardware Design Example
1.8. Testing the Hardware Design Example x
1.8.1. Testing the Hardware Design Example using Ethernet Link Inspector 1.8.2. Testing the Hardware Design Example using Ethernet Toolkit
2. Design Example Description x
2.1. Features 2.2. Design Example Behavior 2.3. Design Example Interface Signals 2.4. Design Example Registers
2.4. Design Example Registers x
2.4.1. Packet Generator Programming Sequence
3. Ethernet Toolkit Overview x
3.1. Features
1. Quick Start Guide
2. Design Example Description
3. Ethernet Toolkit Overview
4. Low Latency 100G Ethernet Intel Stratix 10 FPGA IP Design Example User Guide Archives
5. Document Revision History for the Low Latency 100G Ethernet Stratix® 10 FPGA IP Design Example User Guide

2. Design Example Description

The design example demonstrates the functions of the Low Latency 100G Ethernet Intel Stratix 10 FPGA core with transceiver interface compliant with the IEEE 802.3ba standard CAUI-4 specification. You can generate the design from the Example Design tab in the Low Latency 100G Ethernet Intel Stratix 10 FPGA parameter editor.

To generate the design example, you must first set the parameter values for the IP core variation you intend to generate in your end product. Generating the design example creates a copy of the IP core; the testbench and hardware design example use this variation as the DUT. If you do not set the parameter values for the DUT to match the parameter values in your end product, the design example you generate does not exercise the IP core variation you intend.

Note: The testbench demonstrates a basic test of the IP core. It is not intended to be a substitute for a full verification environment. You must perform more extensive verification of your own Low Latency 100G Ethernet Intel Stratix 10 FPGA design in simulation and in hardware.

Section Content
Features
Design Example Behavior
Design Example Interface Signals
Design Example Registers

Related Information
Level Two Title