Visible to Intel only — GUID: iaj1478735974387
Ixiasoft
Visible to Intel only — GUID: iaj1478735974387
Ixiasoft
3.2.20. Resets
The LL 100GbE IP core has a single asynchronous reset signal. Asserting this signal resets the full IP core. You must hold the reset signal asserted for ten clk_status clock cycles to ensure proper hold time.
You should not release the reset signal until after you observe that the reference clock is stable. If the reference clock is generated from an fPLL, wait until after the fPLL locks. Ten clk_status cycles should be sufficient for the fPLL to lock and the reference clock to stabilize.
Signal Name |
Direction |
Description |
---|---|---|
reset_async | Input |
LL 100GbE IP core asynchronous reset signal |
In addition, the LL 100GbE IP core has one or two of the following synchronous reset signals:
- reset_status—Resets the IP core control and status interface, an Avalon-MM interface. Associated clock is the clk_status clock, which clocks the control and status interface.
- reconfig_reset—Resets the IP core Arria 10 transceiver reconfiguration interface, an Avalon-MM interface. Associated clock is the reconfig_clk, which clocks the Arria 10 transceiver reconfiguration interface. This signal is available only in Arria 10 IP core variations.