JESD204B IP Core Design Example User Guide

Download PDF
ID 683094
Date 11/06/2017
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. JESD204B IP Core Design Example User Guide
1. JESD204B IP Core Design Example User Guide x
1.1. JESD204B Design Example Quick Start Guide 1.2. Supported Configurations 1.3. Generic Design Example 1.4. Presets 1.5. Selecting and Generating the Design Example 1.6. Design Example with RTL State Machine Control Unit 1.7. Design Example with Nios II Processor Control Unit 1.8. JESD204B IP Core Design Example Document Archives 1.9. JESD204B IP Core Design Example User Guide Document Revision History
1.1. JESD204B Design Example Quick Start Guide x
1.1.1. Directory Structure 1.1.2. Generating the Design 1.1.3. Compiling and Simulating the Design 1.1.4. Compiling and Testing the Design
1.1.2. Generating the Design x
1.1.2.1. Procedure 1.1.2.2. Design Example Parameters
1.1.3. Compiling and Simulating the Design x
1.1.3.1. Procedure
1.6. Design Example with RTL State Machine Control Unit x
1.6.1. Design Example Components 1.6.2. System Parameters 1.6.3. System Interface Signals 1.6.4. Example Feature: Dynamic Reconfiguration 1.6.5. Generating and Simulating the Design Example 1.6.6. Generating the Design Example For Compilation 1.6.7. Compiling the JESD204B IP Core Design Example
1.6.1. Design Example Components x
1.6.1.1. PLL 1.6.1.2. PLL Reconfiguration 1.6.1.3. Transceiver Reconfiguration Controller 1.6.1.4. Transceiver Reset Controller 1.6.1.5. Pattern Generator 1.6.1.6. Pattern Checker 1.6.1.7. Transport Layer 1.6.1.8. Serial Port Interface (SPI) 1.6.1.9. Control Unit
1.6.1.5. Pattern Generator x
1.6.1.5.1. Parallel PRBS Generator 1.6.1.5.2. Alternate Checkerboard Generator 1.6.1.5.3. Ramp Wave Generator
1.6.1.6. Pattern Checker x
1.6.1.6.1. Parallel PRBS Checker 1.6.1.6.2. Alternate Checkerboard Checker 1.6.1.6.3. Ramp Wave Checker
1.6.1.7. Transport Layer x
1.6.1.7.1. Supported System Configuration 1.6.1.7.2. Data Bit and Content Mapping Scheme 1.6.1.7.3. TX Path 1.6.1.7.4. RX Path
1.6.1.9. Control Unit x
1.6.1.9.1. Memory Block (ROM) 1.6.1.9.2. Finite State Machine (FSM)
1.6.2. System Parameters x
1.6.2.1. Run-Time Reconfiguration
1.6.4. Example Feature: Dynamic Reconfiguration x
1.6.4.1. Dynamic Reconfiguration Operation 1.6.4.2. MIF ROM
1.6.5. Generating and Simulating the Design Example x
1.6.5.1. Generating the Design Example Simulation Model 1.6.5.2. Simulating the JESD204B IP Core Design Example
1.7. Design Example with Nios II Processor Control Unit x
1.7.1. Design Example Components 1.7.2. System Clocking 1.7.3. Nios II Processor Design Example Files 1.7.4. Nios II Processor Design Example System Parameters 1.7.5. Nios II Processor Design Example System Interface Signals 1.7.6. Compiling the Design Example for Synthesis 1.7.7. Implementing the Design on the Development Kit 1.7.8. Running the Software Control Flow 1.7.9. Customizing the Design Example
1.7.1. Design Example Components x
1.7.1.1. Qsys System Component 1.7.1.2. Transport Layer 1.7.1.3. Test Pattern Generator 1.7.1.4. Test Pattern Checker
1.7.1.1. Qsys System Component x
1.7.1.1.1. JESD204B Subsystem in Qsys 1.7.1.1.2. Nios II Subsystem in Qsys 1.7.1.1.3. Core PLL 1.7.1.1.4. PLL Reconfiguration Controller 1.7.1.1.5. SPI Master
1.7.7. Implementing the Design on the Development Kit x
1.7.7.1. Pin Assignments 1.7.7.2. Hardware Setup 1.7.7.3. Programming the Device
1.7.8. Running the Software Control Flow x
1.7.8.1. Executing the Software C Code 1.7.8.2. Software Parameters 1.7.8.3. Software Interrupt Service Routines (ISR) 1.7.8.4. Software Functions Description
1.7.8.4. Software Functions Description x
1.7.8.4.1. Functions in main.c Source File 1.7.8.4.2. Custom Peripheral Access Macros in macros.c Source File
1.7.9. Customizing the Design Example x
1.7.9.1. Modifying the JESD204B IP Core Parameters Post-Generation 1.7.9.2. Changing the Data Rate or Reference Clock Frequency 1.7.9.3. Implementing a Multi-Link Design
1.7.9.3. Implementing a Multi-Link Design x
1.7.9.3.1. Editing the Qsys Project 1.7.9.3.2. Editing the Top Level HDL File 1.7.9.3.3. Editing the Software C Code
1. JESD204B IP Core Design Example User Guide

1.4. Presets

Standard presets allow instant entry of pre-selected parameter values in the IP and Example Design tabs. You can select the presets at the lower right window in the parameter editor.

The parameter values chosen for the presets belong to the group of supported JESD204B IP configurations for design example generation. You can select one of the presets available for your target device to quickly generate a design example without having to manually set each parameter in the IP tab and verifying that the parameter matches the supported configurations set. There are two preset settings available in the library:

  • RTL State Machine Control example design
  • Nios II Control example design
Note: Selecting a preset will overwrite any pre-existing parameter selections for the IP core under the IP tab. Use the generic example design option instead if you want to retain your pre-selected IP core parameter selections.
Table 8.   Preset Settings
JESD204B IP Parameters Presets
RTL State Machine Control Nios II Control
Devices Support V series and Arria 10 Arria 10
L 2 2
M 2 2
F 2 2
K 16 16
S 1 1
Wrapper Options Both Base and Phy Both Base and Phy
Data Path Duplex Duplex
JESD204B Subclass 1 1
Data Rate 6144 6144
PCS Option Enabled Hard PCS Enabled Hard PCS
PLL Type CMU CMU
Bonding Mode Bonded Non-bonded
Enable Transceiver Dynamic Reconfiguration Yes Yes
PLL/CDR Reference Clock Frequency 153.6 153.6
Enable Bit Reversal And Byte Reversal No No
N 16 16
N’ 16 16
CS 0 0
CF 0 0
High Density User Data Format (HD) 0 0
Enable scramble (SCR) Yes Yes
Enable Error Code Correction (ECC_EN) Yes Yes
Level Two Title