Serial Lite III Streaming Intel® Arria® 10 FPGA IP Design Example User Guide

ID 683055
Date 11/01/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

1.3.1. Procedure

This is a general procedure on how to generate the design example.

To generate the design example from the IP parameter editor:

  1. In the IP Catalog (Tools > IP Catalog), locate and select Serial Lite III Streaming. The IP parameter editor appears.
  2. Specify a top-level name and the folder for your custom IP variation, and the target device. Click OK.
  3. Select a design from the Presets library. When you select a design, the system automatically populates the IP parameters for the design.
    Note: If you select another design, the settings of the IP parameters change accordingly. Only designs generated from the presets support hardware design examples.
  4. Specify the parameters for your design.
  5. Click the Generate Example Design button.
The software generates all design files in the sub-directories. These files are required to run simulation, compilation, and hardware testing.