F-Tile Ethernet Intel® FPGA Hard IP User Guide

ID 683023
Date 6/26/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.4.2. TX MAC Segmented Client Interface with Enabled Preamble Passthrough

When you turn on Preamble Passthrough in the parameter editor, you must provide 8 preamble bytes to the TX MAC segmented client interface.
The table below describes TX MAC segmented field positions with enabled Preamble Passthrough parameter.
  • MII Start of Packet control byte always replaces the first preamble byte.
  • Bits[55:8] are the preamble bits, typically set to the 0x55 value.
  • Bits[63:56] are the last preamble byte. In a standard preamble, it is set to the Start Frame Delimeter 0xD5 value.
Table 44.  TX MAC Segmented Field Positions in i_tx_mac_data with Preamble Passthrough Enabled
Attention:

10GE/25GE requires multiple transfer cycle for header data.

The (') symbol in the 10GE/25GE i_tx_mac_data column represents transfer on the subsequent cycle.

The ('') symbol in the 10GE/25GE i_tx_mac_data column represents transfer on the 2nd subsequent cycle.

100GE/400GE

i_tx_mac_data

40GE/50GE

i_tx_mac_data

10GE/25GE

i_tx_mac_data

MAC Field Note
[7:0] [7:0]' [7:0]'' Custom Preamble [7:0] MII SOP control channel replaces it.
[15:8] [15:8]' [15:8]'' Custom Preamble [15:8] 0x55
[23:16] [23:16]' [23:16]'' Custom Preamble [23:16] 0x55
[31:24] [31:24]' [31:24]'' Custom Preamble [31:24] 0x55
[39:32] [39:32]' [39:32]'' Custom Preamble [39:32] 0x55
[47:40] [47:40]' [47:40]'' Custom Preamble [47:40] 0x55
[55:48] [55:48]' [55:48]'' Custom Preamble [55:48] 0x55
[63:56] [63:56]' [63:56]'' Custom Preamble [63:56] 0xD5 (SFD)
[71:64] [71:64]' [7:0]' Dest Addr[47:40]  
[79:72] [79:72]' [15:8]' Dest Addr[39:32]  
[87:80] [87:80]' [23:16]' Dest Addr[31:24]  
[95:88] [95:88]' [31:24]' Dest Addr[23:16]  
[103:96] [103:96]' [39:32]' Dest Addr[15:8]  
[111:104] [111:104]' [47:40]' Dest Addr[7:0]  
[119:112] [119:112]' [55:48]' Src Addr[47:40] When you turn on Source Address Insertion, contents are replaced by txmac_saddr unless i_tx_skip_crc is high.
[127:120] [127:120]' [63:56]' Src Addr[39:32]
[135:128] [7:0] [7:0] Src Addr[31:24]
[143:136] [15:8] [15:8] Src Addr[23:16]
[151:144] [23:16] [23:16] Src Addr[15:8]
[159:152] [31:24] [31:24] Src Addr[7:0]
[167:160] [39:32] [39:32] Length/Type[15:8]
[175:168] [47:40] [47:40] Length/Type[7:0]
[…:176] [127:48] [63:48]