Visible to Intel only — GUID: uox1665543917832
Ixiasoft
2.4. Simulation
The simulation test case performs the following steps:
- Starts up the design example with an operating speed of 1G.
- Configures the Triple-Speed Ethernet MAC and PCS registers.
- Waits until the assertion of the measure valid signal.
- Sends non-PTP packets to port 0.
- MAC RX port 0 sends the received packets to MAC TX port 1.
When simulation ends, the values of the MAC statistics counters for port 3 are displayed in the transcript window. The transcript window also displays PASSED if the RX Avalon® streaming interface received all packets successfully, all statistics error counters are zero, and the RX MAC statistics counters of port 3 are equal to the TX MAC statistics counters of port 0.