MACsec Intel® FPGA IP User Guide

Download PDF
ID 736108
Date 10/21/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Introduction 2. Interface Overview 3. Parameters 4. Designing with the IP Core 5. MACsec Intel® FPGA IP Example Design 6. Functional Description 7. Configuration Registers for MACsec IP 8. Document Revision History for the MACsec Intel FPGA IP User Guide
1. Introduction x
1.1. Terminology 1.2. IP Core Overview 1.3. Release Information 1.4. Device Family Support 1.5. Device Speed Grade Support and Theoretical Throughput 1.6. Resource Utilization
1.2. IP Core Overview x
1.2.1. IP Description 1.2.2. IP Core Applications
1.2.2. IP Core Applications x
1.2.2.1. SmartNIC 1.2.2.2. Ethernet Bridge + Inline MACsec
2. Interface Overview x
2.1. Block Diagram 2.2. Interfaces 2.3. Clocking Domains
2.2. Interfaces x
2.2.1. IP Interface Signals 2.2.2. IP Interface Signal Timing Diagram/Waveforms 2.2.3. Clocks, Resets, and Interrupts
2.2.1. IP Interface Signals x
2.2.1.1. Common Port Mux Interface 2.2.1.2. Common Port Demux Interface 2.2.1.3. Controlled Port Mux Interface 2.2.1.4. Controlled Port Demux Interface 2.2.1.5. Uncontrolled Port RX Interface 2.2.1.6. Uncontrolled Port TX Interface 2.2.1.7. Crypto RX Interface 2.2.1.8. Crypto TX Interface 2.2.1.9. Management Interface 2.2.1.10. Decrypt Port Mux Management Interface 2.2.1.11. Decrypt Port Demux Management Interface 2.2.1.12. Encrypt Port Mux Management Interface 2.2.1.13. Encrypt Port Demux Management Interface 2.2.1.14. Crypto IP Management Bus
2.2.2. IP Interface Signal Timing Diagram/Waveforms x
2.2.2.1. Common Port Mux Interface Waveform 2.2.2.2. Common Port Demux Interface Waveform 2.2.2.3. Controlled Port Mux Interface Waveform 2.2.2.4. Controlled Port Demux Interface Waveform 2.2.2.5. Uncontrolled Port RX Interface Waveform 2.2.2.6. Uncontrolled Port TX Interface Waveform 2.2.2.7. Crypto RX Waveform 2.2.2.8. Crypto TX Waveform 2.2.2.9. MACsec Management Interface (Read) 2.2.2.10. MACsec Management Interface (Write)
3. Parameters x
3.1. MACsec Intel FPGA IP Parameter Settings
4. Designing with the IP Core x
4.1. Installing and Licensing Intel® FPGA IP Cores 4.2. Specifying the IP Core Parameters and Options 4.3. Generated File Structure 4.4. Reset Transactions 4.5. MACsec Software Initialization Sequence 4.6. MACsec Software Rekeying
4.1. Installing and Licensing Intel® FPGA IP Cores x
4.1.1. Intel® FPGA IP Evaluation Mode
5. MACsec Intel® FPGA IP Example Design x
5.1. Port Configurations 5.2. Multi Interface Buffering Muxing/Demuxing 5.3. 2x25 GbE (Encryption + Decryption) 5.4. Packet Generator/Checker 5.5. Clocking
6. Functional Description x
6.1. AXI-ST Common/Controlled/Uncontrolled Ports 6.2. Packet Parser and Classifier 6.3. SA Lookup and Update 6.4. Encryption Framer/DeFramer 6.5. Decryption Framer/Deframer 6.6. Packet Aggregator/Disaggregator 6.7. Cryptographic AES 6.8. Error Handling 6.9. Packet Statistics
6.1. AXI-ST Common/Controlled/Uncontrolled Ports x
6.1.1. AXI-ST Single Packet Mode 6.1.2. AXI-ST Multi Packet Mode 6.1.3. User Interface Data Streaming 6.1.4. AXI-ST Ready Latency 6.1.5. Port and Secure Channel Mapping 6.1.6. Port and Crypto Channel Mapping 6.1.7. Minimum Packet Size 6.1.8. Byte Ordering 6.1.9. Controlled/Uncontrolled Port Muxing
6.1.3. User Interface Data Streaming x
6.1.3.1. Single Packet Mode Data Stream 6.1.3.2. Multi Packet Mode Data Stream
6.2. Packet Parser and Classifier x
6.2.1. Packet Parser 6.2.2. Packet Classifier
6.3. SA Lookup and Update x
6.3.1. Packet Actions 6.3.2. Packet Buffer 6.3.3. New Channel Assignment 6.3.4. Anti-Replay Protection
6.3.1. Packet Actions x
6.3.1.1. Packet Encrypt 6.3.1.2. Packet Decrypt 6.3.1.3. Packet Discard
6.3.1.3. Packet Discard x
6.3.1.3.1. PDU Validation
6.4. Encryption Framer/DeFramer x
6.4.1. Channel Allocation 6.4.2. Packet Framer 6.4.3. VLAN Tagging
6.4.2. Packet Framer x
6.4.2.1. Bypass Packet 6.4.2.2. Stream Interleaving
6.4.3. VLAN Tagging x
6.4.3.1. No VLAN Tag 6.4.3.2. VLAN Tag (Not in Clear) 6.4.3.3. VLAN Tag (Clear)
6.5. Decryption Framer/Deframer x
6.5.1. XPN Recovery 6.5.2. Replay Check Update 6.5.3. Packet Deframer
6.6. Packet Aggregator/Disaggregator x
6.6.1. Packet Aggregator 6.6.2. Packet Disaggregator
6.7. Cryptographic AES x
6.7.1. Register Address Ordering 6.7.2. Byte Order Swapping 6.7.3. Byte Ordering
6.8. Error Handling x
6.8.1. Packet Error Handling 6.8.2. Memory Blocks ECC Errors 6.8.3. Crypto Errors 6.8.4. System-Level Errors
1. Introduction
2. Interface Overview
3. Parameters
4. Designing with the IP Core
5. MACsec Intel® FPGA IP Example Design
6. Functional Description
7. Configuration Registers for MACsec IP
8. Document Revision History for the MACsec Intel FPGA IP User Guide

6.1.3.1. Single Packet Mode Data Stream

The example below shows the user interface data stream into the MACsec IP as a single full packet in Single Packet Mode. This packet originates from port/stream 0 (based on TID). All the data payload on this example belongs to the same packet. The start of packet in cycle 0 and end of packet in cycle 5 can be derived through the TLAST, Tuser_last_segment<N> and TKEEP signals.
Table 30.  Single Packet Mode with Single Full Packet
AXI-ST Cycle 0 Cycle 1 Cycle 2 Cycle 3 Cycle 4 Cycle 5
TID (TID[5:0]) 0 0 0 0 0 0
TVALID 1 1 1 1 1 1
TLAST 0 0 0 0 0 1
TKEEP All 1 All 1 All 1 All 1 All 1 All 1
Tuser_last_segment<N> (N from 7 to 0) All 0 All 0 All 0 All 0 All 0 All 0
TDATA Data Data Data Data Data Data
The example below shows 3 packets interleaved on the user interface streaming data into the MACsec IP. These packets originate from port/stream 0, 2, and 3 (based on TID) and interleaving happens every 64B word. The packet from port/stream 0 enters the MACsec IP in cycle 0 and 4, and the packet from port/stream 2 enters the MACsec IP in cycle 1, 3, and 6 while the packet from port/stream 3 enters the MACsec IP in cycle 2 and 5. The start and end of packet for each packet can be derived through the TLAST, Tuser_last_segment<N> and TKEEP signals. In this scenario, the start of packet for packet from port/stream 0, 2, and 3 happens in cycle 0, 1, and 2, while the end of packet for packet from port/stream 0, 2, and 3 happens in cycle 4, 5, and 6.
Table 31.  Single Packet Mode with Multiple Packets Interleaved
AXI-ST Cycle 0 Cycle 1 Cycle 2 Cycle 3 Cycle 4 Cycle 5 Cycle 6
TID (TID[5:0]) 0 2 3 2 0 3 2
TVALID 1 1 1 1 1 1 1
TLAST 0 0 0 0 1 1 1
TKEEP All 1 All 1 All 1 All 1 All 1 All 1 All 1
Tuser_last_segment<N> (N from 7 to 0) All 0 All 0 All 0 All 0 All 0 All 0 All 0
TDATA Data Data Data Data Data Data Data

Level Two Title