Visible to Intel only — GUID: tno1637649004272
Ixiasoft
1. HDMI Intel® FPGA IP Design Example Quick Start Guide for Intel Agilex® 7 F-Tile Devices
2. HDMI 2.1 Design Example (Support FRL = 1, Enable Active Video Protocol = None)
3. HDMI 2.1 Design Example with AXI4-stream Interface Enabled (Support FRL =1, Enable Active Video Protocol = AXIS-VVP Full)
4. Document Revision History for the F-Tile HDMI Intel® FPGA IP Design Example User Guide
2.1. Design Features
2.2. Hardware and Software Requirements
2.3. HDMI 2.1 RX-TX Retransmit Design Block Diagram
2.4. Design Parameters
2.5. Design Components
2.6. Design Software Flow
2.7. Clocking Scheme
2.8. Interface Signals
2.9. Hardware Setup
2.10. Simulation Testbench
2.11. Debugging Features
3.7.1. HDMI 2.1 RX-TX Retransmit Design without Video Frame Buffer (Enable Active Video Protocol = AXIS-VVP Full, Video In and Out Use the Same Clock = ON)
3.7.2. HDMI 2.1 RX-TX Retransmit Design with Video Frame Buffer (Enable Active Video Protocol = AXIS-VVP Full, Video In and Out Use the Same = OFF)
3.7.3. Clock Details
Visible to Intel only — GUID: tno1637649004272
Ixiasoft
2.10. Simulation Testbench
The simulation testbench simulates the HDMI TX serial loopback to the RX core.
Note: This simulation testbench is not supported for designs with the Include I2C parameter enabled.
Figure 24. HDMI Intel® FPGA IP Simulation Testbench Block Diagram
Component | Description |
---|---|
Video TPG | The video test pattern generator (TPG) provides the video stimulus. |
Audio Sample Gen | The audio sample generator provides audio sample stimulus. The generator generates an incrementing test data pattern to be transmitted through the audio channel. |
Aux Sample Gen | The aux sample generator provides the auxiliary sample stimulus. The generator generates a fixed data to be transmitted from the transmitter. |
CRC Check | This checker verifies if the TX transceiver recovered clock frequency matches the desired data rate. |
Audio Data Check | The audio data check compares whether the incrementing test data pattern is received and decoded correctly. |
Aux Data Check | The aux data check compares whether the expected aux data is received and decoded correctly on the receiver side. |
The HDMI simulation testbench does the following verification tests:
HDMI Feature | Verification |
---|---|
Video data |
|
Auxiliary data |
|
Audio data |
|
A successful simulation ends with the following message:
# SYMBOLS_PER_CLOCK = 2 # VIC = 4 # BPP = 0 # AUDIO_FREQUENCY (kHz) = 48 # AUDIO_CHANNEL = 8 # Simulation pass
Simulator | Verilog HDL | VHDL |
---|---|---|
ModelSim* - Intel® FPGA Edition/ ModelSim* - Intel® FPGA Starter Edition | Yes | Yes |
VCS* / VCS* MX | Yes | Yes |
Riviera-PRO* | Yes | Yes |
Xcelium* Parallel | Yes | No |