Visible to Intel only — GUID: mwh1410384810458
Ixiasoft
Visible to Intel only — GUID: mwh1410384810458
Ixiasoft
3.8.3.1. Adding Mnemonics with a Plug-In
As an example, the Nios® II plug-in helps you to monitor signal activity for your design as the code is executed. If you set up the logic analyzer to trigger on a function name in your Nios® II code based on data from an .elf, you can see the function name in the Instruction Address signal group at the trigger sample, along with the corresponding disassembled code in the Disassembly signal group, as shown in Figure 13–52. Captured data samples around the trigger are referenced as offset addresses from the trigger function name.