Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide

Download PDF
ID 683763
Date 10/02/2024
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. CvP Description 3. CvP Topologies 4. Design Considerations 5. CvP Driver and Registers 6. Understanding the Design Steps for CvP Initialization using the Supported PCIe Tile in Agilex™ 7 FPGAs 7. Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide Archives 8. Document Revision History for the Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide
1. Overview x
1.1. Benefits of Using CvP 1.2. CvP System 1.3. CvP Modes
1.3. CvP Modes x
1.3.1. CvP Limitations
1.3.1. CvP Limitations x
1.3.1.1. CvP Error Recovery
2. CvP Description x
2.1. Configuration Images 2.2. CvP Modes 2.3. Compression Features 2.4. Pin Description
2.2. CvP Modes x
2.2.1. CvP Initialization Mode 2.2.2. CvP Update Mode
3. CvP Topologies x
3.1. Single Endpoint 3.2. Multiple Endpoints
4. Design Considerations x
4.1. Designing CvP for an Open System 4.2. Designing CvP for a Closed System
4.1. Designing CvP for an Open System x
4.1.1. FPGA Power Supplies Ramp Time Requirement 4.1.2. PCIe Wake-Up Time Requirement
4.1.2. PCIe Wake-Up Time Requirement x
4.1.2.1. For CvP Initialization Mode 4.1.2.2. For CvP Update Mode
5. CvP Driver and Registers x
5.1. CvP Driver Support 5.2. CvP Driver Flow 5.3. VSEC Registers for CvP
5.3. VSEC Registers for CvP x
5.3.1. Vendor Specific Capability Header Register 5.3.2. Vendor Specific Header Register 5.3.3. Intel® Marker Register 5.3.4. User Configurable Device/Board ID Register 5.3.5. CvP Status Register 5.3.6. CvP Mode Control Register 5.3.7. CvP Data Registers 5.3.8. CvP Programming Control Register 5.3.9. CvP Credit Register
6. Understanding the Design Steps for CvP Initialization using the Supported PCIe Tile in Agilex™ 7 FPGAs x
6.1. Implementation of CvP Initialization Mode 6.2. Implementation of CvP Update Mode
6.1. Implementation of CvP Initialization Mode x
6.1.1. Generating the Synthesis HDL files for Supported PCIe* Tile 6.1.2. Setting up the CvP Parameters in Device and Pin Options 6.1.3. Compiling the Design 6.1.4. Converting the SOF File 6.1.5. Bringing up the Hardware
6.1.5. Bringing up the Hardware x
6.1.5.1. Installing the Upstream Open Source CvP Driver in Linux Systems 6.1.5.2. Setting Up the Correct MSEL Switch State 6.1.5.3. Programming CvP Images
6.2. Implementation of CvP Update Mode x
6.2.1. Instantiating the PCIe Hard IP 6.2.2. Setting Up the CvP Parameters 6.2.3. Setting Up the Base Revision 6.2.4. Setting Up and Compile the Updated Revision 6.2.5. Converting the SOF File 6.2.6. Programming the Core RBF file from the Updated Revision via PCIe* Link
6.2.3. Setting Up the Base Revision x
6.2.3.1. Creating a Reserved Core Partition 6.2.3.2. Defining a Logic Lock Region 6.2.3.3. Compiling and Exporting the Root Partition
1. Overview
2. CvP Description
3. CvP Topologies
4. Design Considerations
5. CvP Driver and Registers
6. Understanding the Design Steps for CvP Initialization using the Supported PCIe Tile in Agilex™ 7 FPGAs
7. Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide Archives
8. Document Revision History for the Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide

6.1.4. Converting the SOF File

Follow these steps to convert your .sof file into separate images for the periphery and core logic.
  1. After the .sof file is generated, under File menu, select Programming File Generator. The new window appears.
  2. In the Device family, select Agilex 7 .
  3. For the Configuration mode, select Active Serial x4.
  4. Under Output files tab, specify the following parameters:
    1. Specify the Output directory and Name for the output file.
      Note: The output directory you specify must already exist in the file system.
    2. Select Raw Binary File for CvP Core Configuration (.rbf).
    3. Select JTAG Indirect Configuration File for Periphery Configuration (.jic) if you want to use Active Serial configuration mode.
    4. Select Memory Map File (.map) or Raw Programming Data File (.rpd) if you plan to use third party programmer for flash programming.
      Figure 11. Programming File Generator- Output Files Tab
  5. Under the Input Files tab, click Add Bitstream. Navigate your file system, and select the .sof file, and click Open.
    Figure 12. Programming File Generator- Input Files Tab
  6. Under the Configuration device tab:
    1. Click Add Device.
    2. Under the Configuration Device tab, click to select your configuration device and click OK.
    3. Click to select the configuration device in the list and click Add Partition.
    4. In the Add Partition window, select the file in the Input file box, select Start in the Address Mode box, and then click OK.
    5. Click Select.
    6. In the Select Devices window, click Agilex 7 in the device family list, select your flash loader device in the Device name list, and then click OK.
      Figure 13. Programming File Generator- Configuration Device Tab
  7. Click Generate.
Level Two Title