Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide

Download PDF
ID 683763
Date 10/02/2024
Public
Document Table of Contents
Document Table of Contents x
1. Overview 2. CvP Description 3. CvP Topologies 4. Design Considerations 5. CvP Driver and Registers 6. Understanding the Design Steps for CvP Initialization using the Supported PCIe Tile in Agilex™ 7 FPGAs 7. Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide Archives 8. Document Revision History for the Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide
1. Overview x
1.1. Benefits of Using CvP 1.2. CvP System 1.3. CvP Modes
1.3. CvP Modes x
1.3.1. CvP Limitations
1.3.1. CvP Limitations x
1.3.1.1. CvP Error Recovery
2. CvP Description x
2.1. Configuration Images 2.2. CvP Modes 2.3. Compression Features 2.4. Pin Description
2.2. CvP Modes x
2.2.1. CvP Initialization Mode 2.2.2. CvP Update Mode
3. CvP Topologies x
3.1. Single Endpoint 3.2. Multiple Endpoints
4. Design Considerations x
4.1. Designing CvP for an Open System 4.2. Designing CvP for a Closed System
4.1. Designing CvP for an Open System x
4.1.1. FPGA Power Supplies Ramp Time Requirement 4.1.2. PCIe Wake-Up Time Requirement
4.1.2. PCIe Wake-Up Time Requirement x
4.1.2.1. For CvP Initialization Mode 4.1.2.2. For CvP Update Mode
5. CvP Driver and Registers x
5.1. CvP Driver Support 5.2. CvP Driver Flow 5.3. VSEC Registers for CvP
5.3. VSEC Registers for CvP x
5.3.1. Vendor Specific Capability Header Register 5.3.2. Vendor Specific Header Register 5.3.3. Intel® Marker Register 5.3.4. User Configurable Device/Board ID Register 5.3.5. CvP Status Register 5.3.6. CvP Mode Control Register 5.3.7. CvP Data Registers 5.3.8. CvP Programming Control Register 5.3.9. CvP Credit Register
6. Understanding the Design Steps for CvP Initialization using the Supported PCIe Tile in Agilex™ 7 FPGAs x
6.1. Implementation of CvP Initialization Mode 6.2. Implementation of CvP Update Mode
6.1. Implementation of CvP Initialization Mode x
6.1.1. Generating the Synthesis HDL files for Supported PCIe* Tile 6.1.2. Setting up the CvP Parameters in Device and Pin Options 6.1.3. Compiling the Design 6.1.4. Converting the SOF File 6.1.5. Bringing up the Hardware
6.1.5. Bringing up the Hardware x
6.1.5.1. Installing the Upstream Open Source CvP Driver in Linux Systems 6.1.5.2. Setting Up the Correct MSEL Switch State 6.1.5.3. Programming CvP Images
6.2. Implementation of CvP Update Mode x
6.2.1. Instantiating the PCIe Hard IP 6.2.2. Setting Up the CvP Parameters 6.2.3. Setting Up the Base Revision 6.2.4. Setting Up and Compile the Updated Revision 6.2.5. Converting the SOF File 6.2.6. Programming the Core RBF file from the Updated Revision via PCIe* Link
6.2.3. Setting Up the Base Revision x
6.2.3.1. Creating a Reserved Core Partition 6.2.3.2. Defining a Logic Lock Region 6.2.3.3. Compiling and Exporting the Root Partition
1. Overview
2. CvP Description
3. CvP Topologies
4. Design Considerations
5. CvP Driver and Registers
6. Understanding the Design Steps for CvP Initialization using the Supported PCIe Tile in Agilex™ 7 FPGAs
7. Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide Archives
8. Document Revision History for the Agilex™ 7 Device Configuration via Protocol (CvP) Implementation User Guide

6.2.6. Programming the Core RBF file from the Updated Revision via PCIe* Link

Before you begin the CvP update, confirmed the driver is fully installed and you programmed the FPGA using the base revision image through any configuration scheme.

Follow these steps to program the .core.rbf:

  1. In the terminal window, type the following command to ensure you have an active PCIe* link. 
    lspci -vvv -d1172:
  2. Follow these steps to program the .core.rbf file from the Updated Revision via PCIe* Link:
    1. Copy the .core.rbf file into /lib/firmware directory.
    2. In the /lib/firmware directory, run the following command to use the FPGA manager to configure the core image.
      • Run: su to get root access.
      • Run: 
      • echo <filename>.core.rbf > /sys/kernel/debug/fpga_manager/fpga0/firmware_name
  3. You can see your core image running on the Agilex™ 7 FPGA PCIe* card. Alternatively, print out the kernel message using the dmesg to ensure the CvP is completed successfully.
Level Two Title