Visible to Intel only — GUID: nik1411172570210
Ixiasoft
2.1. Installation and Licensing for LL 40GbE IP Core for Stratix® V Devices
2.2. Installing and Licensing Intel® FPGA IP Cores
2.3. Specifying the IP Core Parameters and Options
2.4. IP Core Parameters
2.5. Files Generated for Stratix V Variations
2.6. Files Generated for Arria 10 Variations
2.7. Integrating Your IP Core in Your Design
2.8. IP Core Testbenches
2.9. Compiling the Full Design and Programming the FPGA
2.10. Initializing the IP Core
2.7.1. Pin Assignments
2.7.2. External Transceiver Reconfiguration Controller Required in Stratix V Designs
2.7.3. Transceiver PLL Required in Arria 10 Designs
2.7.4. Handling Potential Jitter in Intel® Arria® 10 Devices
2.7.5. External Time-of-Day Module for Variations with 1588 PTP Feature
2.7.6. Clock Requirements for 40GBASE-KR4 Variations
2.7.7. External TX MAC PLL
2.7.8. Placement Settings for the LL 40GbE Core
2.8.2.1. Generating the LL 40GbE Testbench
2.8.2.2. Optimizing the IP Core Simulation With the Testbenches
2.8.2.3. Optimization in the 40GBASE-KR4 Testbench
2.8.2.4. Simulating with the Modelsim Simulator
2.8.2.5. Simulating with the NCSim Simulator
2.8.2.6. Simulating with the VCS Simulator
2.8.2.7. Testbench Output Example
3.2.1. LL 40GbE IP Core TX Datapath
3.2.2. LL 40GbE IP Core TX Data Bus Interfaces
3.2.3. LL 40GbE IP Core RX Datapath
3.2.4. LL 40GbE IP Core RX Data Bus Interfaces
3.2.5. External Reconfiguration Controller
3.2.6. External Transceiver PLL
3.2.7. External TX MAC PLL
3.2.8. Congestion and Flow Control Using Pause Frames
3.2.9. Pause Control and Generation Interface
3.2.10. Pause Control Frame Filtering
3.2.11. Link Fault Signaling Interface
3.2.12. Statistics Counters Interface
3.2.13. 1588 Precision Time Protocol Interfaces
3.2.14. PHY Status Interface
3.2.15. Transceiver PHY Serial Data Interface
3.2.16. Low Latency 40GBASE-KR4 IP Core Variations
3.2.17. Control and Status Interface
3.2.18. Arria 10 Transceiver Reconfiguration Interface
3.2.19. Clocks
3.2.20. Resets
3.2.2.1. LL 40GbE IP Core User Interface Data Bus
3.2.2.2. LL 40GbE IP Core TX Data Bus with Adapters (Avalon-ST Interface)
3.2.2.3. LL 40GbE IP Core TX Data Bus Without Adapters (Custom Streaming Interface)
3.2.2.4. Bus Quantization Effects With Adapters
3.2.2.5. User Interface to Ethernet Transmission
3.2.3.1. LL 40GbE IP Core RX Filtering
3.2.3.2. LL 40GbE IP Core Preamble Processing
3.2.3.3. IP Core Strict SFD Checking
3.2.3.4. LL 40GbE IP Core FCS (CRC-32) Removal
3.2.3.5. LL 40GbE IP Core CRC Checking
3.2.3.6. LL 40GbE IP Core Malformed Packet Handling
3.2.3.7. RX CRC Forwarding
3.2.3.8. Inter-Packet Gap
3.2.3.9. Pause Ignore
3.2.3.10. Control Frame Identification
Visible to Intel only — GUID: nik1411172570210
Ixiasoft
2.7. Integrating Your IP Core in Your Design
When you integrate your IP core instance in your design, you must pay attention to the following items:
- Pin Assignments
External Transceiver Reconfiguration Controller Required in Stratix V Designs
Transceiver PLL Required in Arria 10 Designs
Handling Potential Jitter in Intel Arria 10 Devices
External Time-of-Day Module for Variations with 1588 PTP Feature
Clock Requirements for 40GBASE-KR4 Variations
External TX MAC PLL
Placement Settings for the LL 40GbE Core
Related Information