eCPRI Intel® FPGA IP User Guide

Download PDF
ID 683685
Date 8/16/2024
Public
Document Table of Contents
Document Table of Contents x
1. About the eCPRI IP 2. Getting Started 3. eCPRI IP Parameters 4. Functional Description 5. Interface Overview 6. eCPRI IP Registers 7. eCPRI Intel FPGA IP User Guide Archives 8. Document Revision History for the eCPRI Intel® FPGA IP User Guide
1. About the eCPRI IP x
1.1. eCPRI Intel® FPGA IP Features 1.2. eCPRI IP Device Family Support 1.3. eCPRI Intel® FPGA IP Device Speed Grade Support 1.4. eCPRI IP Resource Utilization 1.5. Intel® FPGA IP Core Verification 1.6. eCPRI IP Release Information
2. Getting Started x
2.1. Installing and Licensing 2.2. Specifying the IP Core Parameters and Options 2.3. eCPRI IP Generated File Structure 2.4. Simulating the eCPRI IP 2.5. Compiling the Full Design and Programming the FPGA
2.2. Specifying the IP Core Parameters and Options x
2.2.1. Reference and System PLL Clock for your IP Design
4. Functional Description x
4.1. Interfaces 4.2. High Level Data Path Flow 4.3. Operation of the eCPRI IP Blocks
4.2. High Level Data Path Flow x
4.2.1. Transmit TX Path 4.2.2. Receive RX Path 4.2.3. Supported Ethernet Variants
4.3. Operation of the eCPRI IP Blocks x
4.3.1. Packet Classifier 4.3.2. Ethernet Header Insertion/Removal 4.3.3. Concatenation/De-concatenation 4.3.4. Header Mapper/De-Mapper 4.3.5. eCPRI IWF Type 0 4.3.6. eCPRI Message 5 Packet Parser 4.3.7. Packet Queue 4.3.8. eCPRI Message Type 4.3.9. Error Handling 4.3.10. RX Throttling
4.3.8. eCPRI Message Type x
4.3.8.1. eCPRI Message Type 0- IQ Data Transfer 4.3.8.2. eCPRI Message Type 1- Bit Sequence Transfer 4.3.8.3. eCPRI Message Type 2- Real Time Control Data 4.3.8.4. eCPRI Message Type 3- Generic Data Transfer 4.3.8.5. eCPRI Message Type 4- Remote Memory Access 4.3.8.6. eCPRI Message Type 5- One-Way Delay Measurement 4.3.8.7. eCPRI Message Type 6- Remote Reset 4.3.8.8. eCPRI Message Type 7- Event Indication 4.3.8.9. eCPRI Message Type 64- 255 Vendor Specific
5. Interface Overview x
5.1. eCPRI IP Clock Signals 5.2. Power, Reset, and Firewalls Signals 5.3. TX Time of Day Interface 5.4. RX Time of Day Interface 5.5. Interrupt 5.6. Configuration Avalon® Memory-Mapped Interface 5.7. Ethernet MAC Source Interface 5.8. Ethernet MAC Sink Interface 5.9. External ST Source Interface 5.10. External ST Sink Interface 5.11. eCPRI IP Source Interface 5.12. eCPRI IP Sink Interface 5.13. Miscellaneous Interface Signals 5.14. IWF Type 0 eCPRI Interface 5.15. IWF Type 0 CPRI MAC Interface
5.2. Power, Reset, and Firewalls Signals x
5.2.1. Reset Control and Initialization Flows
5.7. Ethernet MAC Source Interface x
5.7.1. E-tile Hard IP for Ethernet 1588 PTP Signals 5.7.2. 25G Ethernet MAC 1588 PTP Signals 5.7.3. 10G Ethernet MAC 1588 PTP Signals 5.7.4. F-Tile Ethernet Hard IP 1588 PTP Signals 5.7.5. Agilex 5 Device Ethernet Hard IP 1588 PTP Signals
5.14. IWF Type 0 eCPRI Interface x
5.14.1. IWF Source Interface 5.14.2. IWF Sink Interface
5.15. IWF Type 0 CPRI MAC Interface x
5.15.1. CPRI 32-bit IQ Data TX Interface 5.15.2. CPRI 64-bit IQ Data TX Interface 5.15.3. CPRI 32-bit Ctrl_AxC TX Interface 5.15.4. CPRI 64-bit Ctrl_AxC TX Interface 5.15.5. CPRI 32-bit Vendor Specific TX Interface 5.15.6. CPRI 64-bit Vendor Specific TX Interface 5.15.7. CPRI 32-bit Real-time Vendor Specific TX Interface 5.15.8. CPRI 64-bit Real-time Vendor Specific TX Interface 5.15.9. CPRI Gigabit Media Independent Interface (GMII) 5.15.10. CPRI IP L1 Control and Status Interface
1. About the eCPRI IP
2. Getting Started
3. eCPRI IP Parameters
4. Functional Description
5. Interface Overview
6. eCPRI IP Registers
7. eCPRI Intel FPGA IP User Guide Archives
8. Document Revision History for the eCPRI Intel® FPGA IP User Guide

5.15.9. CPRI Gigabit Media Independent Interface (GMII)

Table 57.  Signals of CPRI GMII Interface
Signal Name Width (Bits) I/O Direction Description
TX Interface
gmii_txen[N] 1 Output Valid signal for GMII interface that indicate data is valid. This signal required to be asserted two clock cycles earlier for the character S to be inserted into the data stream as the start of packet before takes in the real GMII data. The deassertion of this signal trigger the assertion of /T/R as the representation of end of packet.

This signal is going to CPRI MAC interface.

gmii_txer[N] 1 Output Ethernet transmit coding error. When this signal is asserted, char /V/ will be inserted and pass into the CPRI link.

This signal is going to CPRI MAC interface.

gmii_txd[N] 8 Output Ethernet transmit data. The data transmitted from the external Ethernet block to the CPRI IP core, for transmission on the CPRI link. This input bus is synchronous to the rising edge of gmii_txclk clock.

This signal is going to CPRI MAC interface.

gmii_txfifo_status[N] 4 Input Ethernet TX PCS FIFO fill level status. The individual bits have the following meanings:
  • Bit [3[: FIFO empty
  • Bit [2]: FIFO almost empty
  • Bit [1]: FIFO full
  • Bit [0]: FIFO almost full
This signal is going to CPRI MAC interface.
RX Interface
gmii_rxdv[N] 1 Input

Ethernet receive data valid. Indicates the presence of valid data or initial start-of-packet control character on gmii_rxd.

This signal is going to CPRI MAC interface.

gmii_rxer[N] 1 Input

Ethernet receive error. Indicates an error on gmii_rxd. When this signal is asserted, the value on gmii_rxd is 0x0E.

This signal is going to CPRI MAC interface.

gmii_rxd[N] 8 Input

Ethernet receive data. Data bus for data from the CPRI IP to the external Ethernet block. All bits are deasserted during reset, and all bits are asserted after reset until the CPRI IP achieves frame synchronization.

This signal is going to CPRI MAC interface.

gmii_rxfifo_status[N] 4 Input Ethernet RX PCS FIFO fill level status. The individual bits have the following meanings:
  • Bit [3[: FIFO empty
  • Bit [2]: FIFO almost empty
  • Bit [1]: FIFO full
  • Bit [0]: FIFO almost full
This signal is going to CPRI MAC interface.
Level Two Title