Intel Agilex® 7 Configuration User Guide

Download PDF
ID 683673
Date 10/09/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Intel Agilex® 7 Configuration User Guide 2. Intel Agilex® 7 Configuration Details 3. Intel Agilex® 7 Configuration Schemes 4. Including the Reset Release Intel® FPGA IP in Your Design 5. Remote System Update (RSU) 6. Intel Agilex® 7 Configuration Features 7. Intel Agilex® 7 Debugging Guide 8. Intel Agilex® 7 Configuration User Guide Archives 9. Document Revision History for the Intel Agilex® 7 Configuration User Guide
1. Intel Agilex® 7 Configuration User Guide x
1.1. Intel Agilex® 7 Configuration Overview 1.2. Intel Agilex® 7 Configuration Architecture
1.1. Intel Agilex® 7 Configuration Overview x
1.1.1. Configuration and Related Signals 1.1.2. Intel Download Cables Supporting Configuration in Intel Agilex® 7 Devices
1.2. Intel Agilex® 7 Configuration Architecture x
1.2.1. Secure Device Manager
1.2.1. Secure Device Manager x
1.2.1.1. Updating the SDM Firmware 1.2.1.2. Specifying Boot Order for Intel Agilex® 7 SoC Devices
2. Intel Agilex® 7 Configuration Details x
2.1. Intel Agilex® 7 Configuration Timing Diagram 2.2. Configuration Flow Diagram 2.3. Device Response to Configuration and Reset Events 2.4. Additional Clock Requirements for HPS and Transceivers 2.5. Intel Agilex® 7 Configuration Pins 2.6. Configuration Clocks 2.7. Intel Agilex® 7 Configuration Time Estimation 2.8. Generating Compressed .sof File
2.5. Intel Agilex® 7 Configuration Pins x
2.5.1. SDM Pin Mapping 2.5.2. MSEL Settings 2.5.3. Device Configuration Pins for Optional Configuration Signals
2.5.3. Device Configuration Pins for Optional Configuration Signals x
2.5.3.1. Specifying Optional Configuration Pins 2.5.3.2. Enabling Dual-Purpose Pins 2.5.3.3. I/O Standards and Features for Configuration Pins 2.5.3.4. SDM I/O Pins for Power Management and SmartVID 2.5.3.5. Specifying Pins for Partial Reconfiguration (PR)
2.5.3.1. Specifying Optional Configuration Pins x
2.5.3.1.1. nCONFIG 2.5.3.1.2. nSTATUS 2.5.3.1.3. CONF_DONE and INIT_DONE 2.5.3.1.4. SDM_IO Pins
2.5.3.3. I/O Standards and Features for Configuration Pins x
2.5.3.3.1. IBIS Model
2.6. Configuration Clocks x
2.6.1. Setting Configuration Clock Source 2.6.2. OSC_CLK_1 Clock Input
3. Intel Agilex® 7 Configuration Schemes x
3.1. Avalon-ST Configuration 3.2. AS Configuration 3.3. JTAG Configuration
3.1. Avalon-ST Configuration x
3.1.1. Avalon® -ST Configuration Scheme Hardware Components and File Types 3.1.2. Enabling Avalon-ST Device Configuration 3.1.3. The AVST_READY Signal 3.1.4. RBF Configuration File Format 3.1.5. Avalon-ST Single-Device Configuration 3.1.6. Debugging Guidelines for the Avalon® -ST Configuration Scheme 3.1.7. IP for Use with the Avalon® -ST Configuration Scheme: Parallel Flash Loader II Intel® FPGA IP Core
3.1.7. IP for Use with the Avalon® -ST Configuration Scheme: Parallel Flash Loader II Intel® FPGA IP Core x
3.1.7.1. Functional Description 3.1.7.2. Designing with the Parallel Flash Loader II Intel® FPGA IP for Avalon-ST Single Device Configuration 3.1.7.3. Generating the PFL II IP Core 3.1.7.4. Constraining the PFL II IP Core 3.1.7.5. Using the PFL II IP Core 3.1.7.6. Supported Flash Memory Devices
3.1.7.1. Functional Description x
3.1.7.1.1. Generating and Programming a .pof into CFI Flash 3.1.7.1.2. Implementing Multiple Pages in the Flash .pof 3.1.7.1.3. Storing Option Bits 3.1.7.1.4. Verifying the Option Bit Start and End Addresses 3.1.7.1.5. Implementing Page Mode and Option Bits in the CFI Flash Memory Device
3.1.7.2. Designing with the Parallel Flash Loader II Intel® FPGA IP for Avalon-ST Single Device Configuration x
3.1.7.2.1. PFL II Parameters 3.1.7.2.2. PFL II Signals
3.1.7.3. Generating the PFL II IP Core x
3.1.7.3.1. Controlling Avalon-ST Configuration with PFL II IP Core 3.1.7.3.2. Mapping PFL II IP Core and Flash Address 3.1.7.3.3. Creating a Single PFL II IP for Programming and Configuration 3.1.7.3.4. Creating Separate PFL II IP Functions
3.1.7.4. Constraining the PFL II IP Core x
3.1.7.4.1. PFL II IP Recommended Design Constraints to FPGA Avalon-ST Pins 3.1.7.4.2. PFL II IP Recommended Design Constraints for Using QSPI Flash 3.1.7.4.3. PFL II IP Recommended Design Constraints for using CFI Flash 3.1.7.4.4. PFL II IP Recommended Constraints for Other Input Pins 3.1.7.4.5. PFL II IP Recommended Constraints for Other Output Pins
3.1.7.5. Using the PFL II IP Core x
3.1.7.5.1. Converting .sof to .pof File 3.1.7.5.2. Programming CPLDs and Flash Memory Devices Sequentially 3.1.7.5.3. Programming CPLDs and Flash Memory Devices Separately 3.1.7.5.4. Defining New CFI Flash Memory Device
3.2. AS Configuration x
MSEL Pin Function for the AS x4 Configuration Scheme 3.2.1. AS Configuration Scheme Hardware Components and File Types 3.2.2. AS Single-Device Configuration 3.2.3. AS Using Multiple Serial Flash Devices 3.2.4. AS Configuration Timing Parameters 3.2.5. Skew Tolerance Guidelines 3.2.6. Programming Serial Flash Devices 3.2.7. Serial Flash Memory Layout 3.2.8. AS_CLK 3.2.9. Active Serial Configuration Software Settings 3.2.10. Intel® Quartus® Prime Programming Steps 3.2.11. Debugging Guidelines for the AS Configuration Scheme
3.2.5. Skew Tolerance Guidelines x
3.2.5.1. Maximum Allowable External AS_DATA Pin Skew Delay Guidelines 3.2.5.2. Maximum Allowable External nCSO Pin Skew Delay Guidelines
3.2.6. Programming Serial Flash Devices x
3.2.6.1. Programming Serial Flash Devices using the AS Interface 3.2.6.2. Programming Serial Flash Devices using the JTAG Interface
3.2.7. Serial Flash Memory Layout x
3.2.7.1. Understanding Quad SPI Flash Byte-Addressing
3.2.10. Intel® Quartus® Prime Programming Steps x
3.2.10.1. Generating Programming Files using the Programming File Generator 3.2.10.2. Programming .pof files into Serial Flash Device 3.2.10.3. Programming .jic files into Serial Flash Device
3.3. JTAG Configuration x
3.3.1. JTAG Configuration Scheme Hardware Components and File Types 3.3.2. JTAG Device Configuration 3.3.3. JTAG Multi-Device Configuration 3.3.4. Debugging Guidelines for the JTAG Configuration Scheme
3.3.2. JTAG Device Configuration x
3.3.2.1. JTAG Single-Device Configuration using Download Cable Connections 3.3.2.2. JTAG Single-Device Configuration using a Microprocessor
3.3.3. JTAG Multi-Device Configuration x
3.3.3.1. JTAG Multi-Device Configuration using Download Cable
4. Including the Reset Release Intel® FPGA IP in Your Design x
4.1. Understanding the Reset Release IP Requirement 4.2. Instantiating the Reset Release IP In Your Design 4.3. Gating the PLL Reset Signal 4.4. Guidance When Using Partial Reconfiguration (PR) 4.5. Detailed Description of Device Configuration
4.5. Detailed Description of Device Configuration x
4.5.1. Device Initialization 4.5.2. Embedded Memory Block Initial Conditions 4.5.3. Protecting State Machine Logic
5. Remote System Update (RSU) x
5.1. Remote System Update Functional Description 5.2. Guidelines for Performing Remote System Update Functions for Non-HPS 5.3. Commands and Responses 5.4. Quad SPI Flash Layout 5.5. Generating Remote System Update Image Files Using the Programming File Generator 5.6. Remote System Update from FPGA Core Example 5.7. Debugging Guidelines for RSU Configuration
5.1. Remote System Update Functional Description x
5.1.1. RSU Glossary 5.1.2. Remote System Update Using AS Configuration 5.1.3. Remote System Update Configuration Images 5.1.4. Remote System Update Configuration Sequence 5.1.5. RSU Recovery from Corrupted Images 5.1.6. Updates with the Factory Update Image
5.3. Commands and Responses x
5.3.1. Operation Commands 5.3.2. Error Code Responses 5.3.3. Error Code Recovery
5.4. Quad SPI Flash Layout x
5.4.1. High Level Flash Layout 5.4.2. Detailed Quad SPI Flash Layout
5.4.1. High Level Flash Layout x
5.4.1.1. Standard (non-RSU) Image Layout in Flash 5.4.1.2. RSU Image Layout in Flash – SDM Perspective 5.4.1.3. RSU Image Layout – Your Perspective
5.4.1.2. RSU Image Layout in Flash – SDM Perspective x
5.4.1.2.1. Firmware Version Information
5.4.2. Detailed Quad SPI Flash Layout x
5.4.2.1. RSU Image Sub-Partitions Layout 5.4.2.2. Sub-Partition Table Layout 5.4.2.3. Configuration Pointer Block Layout 5.4.2.4. Modifying the List of Application Images
5.5. Generating Remote System Update Image Files Using the Programming File Generator x
5.5.1. Generating the Initial RSU Image 5.5.2. Generating an Application Image 5.5.3. Generating a Factory Update Image 5.5.4. Command Sequence To Perform Quad SPI Operations
5.5.1. Generating the Initial RSU Image x
5.5.1.1. Generating the Initial RSU Image Using SOF Files 5.5.1.2. Generating the Initial RSU Image Using RBF Files
5.6. Remote System Update from FPGA Core Example x
5.6.1. Prerequisites 5.6.2. Creating Initial Flash Image Containing Bitstreams for Factory Image and One Application Image 5.6.3. Programming Flash Memory with the Initial Remote System Update Image 5.6.4. Reconfiguring the Device with an Application or Factory Image 5.6.5. Adding an Application Image 5.6.6. Removing an Application Image
6. Intel Agilex® 7 Configuration Features x
6.1. Device Security 6.2. Configuration via Protocol 6.3. Partial Reconfiguration
7. Intel Agilex® 7 Debugging Guide x
7.1. Configuration Debugging Checklist 7.2. Intel Agilex® 7 Configuration Architecture Overview 7.3. Understanding Configuration Status Using quartus_pgm command 7.4. Configuration File Format Differences 7.5. Understanding SEUs 7.6. Reading the Unique 64-Bit CHIP ID 7.7. E-Tile Transceivers May Fail To Configure 7.8. Understanding and Troubleshooting Configuration Pin Behavior 7.9. Configuration Debugger Tool
1. Intel Agilex® 7 Configuration User Guide
2. Intel Agilex® 7 Configuration Details
3. Intel Agilex® 7 Configuration Schemes
4. Including the Reset Release Intel® FPGA IP in Your Design
5. Remote System Update (RSU)
6. Intel Agilex® 7 Configuration Features
7. Intel Agilex® 7 Debugging Guide
8. Intel Agilex® 7 Configuration User Guide Archives
9. Document Revision History for the Intel Agilex® 7 Configuration User Guide

3.2. AS Configuration

In AS configuration schemes, the SDM block in the Intel Agilex® 7 device controls the configuration process and interfaces. The serial flash configuration device stores the configuration data. During AS Configuration, the SDM first powers on with the boot ROM. Then, the SDM loads the initial configuration firmware from AS x4 flash. After the configuration firmware loads, this firmware controls the remainder of the configuration process, including I/O configuration and FPGA core configuration. Designs including an HPS, can use the HPS to access serial flash memory after the initial configuration.

Note: The serial flash configuration device must be fully powered up at the same time or before ramping up VCCIO_SDM of the Intel Agilex® 7 device. For more information about the power sequence, refer to the Intel Agilex® 7 Power Management User Guide.
Important: You must connect the serial flash or quad SPI flash reset pin to the AS_nRST pin. The SDM must fully control the QSPI reset. Do not connect the quad SPI reset pin to any external host.

The AS configuration scheme supports AS x4 (4-bit data width) mode only.

Table 35.   Intel Agilex® 7 Configuration Data Width, Clock Rates, and Data Rates
Mode Data Width (bits) Max Clock Rate Max Data Rate MSEL[2:0]
Active Active Serial (AS)

4

 166 MHz 664 Mbps

Fast mode - 001

Normal mode - 011
Table 36.  Required Configuration Signals for the AS Configuration Scheme
Configuration Function Pin Type Direction Powered by
nSTATUS SDM I/O Output VCCIO_SDM
nCONFIG SDM I/O Input VCCIO_SDM
MSEL[2:0] SDM I/O Input VCCIO_SDM
AS_nCSO[3:0] SDM I/O Output VCCIO_SDM
AS_DATA[3:0] SDM I/O Bidirectional VCCIO_SDM
AS_CLK SDM I/O Output VCCIO_SDM
AS_nRST 12 SDM I/O Output VCCIO_SDM
Note: Although the CONF_DONE and INIT_DONE configuration signals are not required, Intel recommends that you use these signals. The SDM drives the CONF_DONE signal high after successfully receiving full bitstream. The SDM drives the INIT_DONE signal high to indicate the device is fully in user mode.These signals are important when debugging configuration.

MSEL Pin Function for the AS x4 Configuration Scheme

The SDM samples the MSEL pins immediately after power-on in the SDM Start state. After the SDM samples the MSEL pins, the MSEL pins become active-low chips selects. For AS x4 designs using one flash device, AS_nCSOO asserts low when the SDM starts to communicate with the QSPI flash. The remaining chip select pins, AS_nCSO1 - AS_nCSO3 deassert high.


Section Content
AS Configuration Scheme Hardware Components and File Types
AS Single-Device Configuration
AS Using Multiple Serial Flash Devices
AS Configuration Timing Parameters
Skew Tolerance Guidelines
Programming Serial Flash Devices
Serial Flash Memory Layout
AS_CLK
Active Serial Configuration Software Settings
Intel Quartus Prime Programming Steps
Debugging Guidelines for the AS Configuration Scheme

Related Information
12 Even if not currently utilized, connect the pin to ensure future compatibility.
Level Two Title