Intel Agilex® 7 Configuration User Guide

Download PDF
ID 683673
Date 10/09/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Intel Agilex® 7 Configuration User Guide 2. Intel Agilex® 7 Configuration Details 3. Intel Agilex® 7 Configuration Schemes 4. Including the Reset Release Intel® FPGA IP in Your Design 5. Remote System Update (RSU) 6. Intel Agilex® 7 Configuration Features 7. Intel Agilex® 7 Debugging Guide 8. Intel Agilex® 7 Configuration User Guide Archives 9. Document Revision History for the Intel Agilex® 7 Configuration User Guide
1. Intel Agilex® 7 Configuration User Guide x
1.1. Intel Agilex® 7 Configuration Overview 1.2. Intel Agilex® 7 Configuration Architecture
1.1. Intel Agilex® 7 Configuration Overview x
1.1.1. Configuration and Related Signals 1.1.2. Intel Download Cables Supporting Configuration in Intel Agilex® 7 Devices
1.2. Intel Agilex® 7 Configuration Architecture x
1.2.1. Secure Device Manager
1.2.1. Secure Device Manager x
1.2.1.1. Updating the SDM Firmware 1.2.1.2. Specifying Boot Order for Intel Agilex® 7 SoC Devices
2. Intel Agilex® 7 Configuration Details x
2.1. Intel Agilex® 7 Configuration Timing Diagram 2.2. Configuration Flow Diagram 2.3. Device Response to Configuration and Reset Events 2.4. Additional Clock Requirements for HPS and Transceivers 2.5. Intel Agilex® 7 Configuration Pins 2.6. Configuration Clocks 2.7. Intel Agilex® 7 Configuration Time Estimation 2.8. Generating Compressed .sof File
2.5. Intel Agilex® 7 Configuration Pins x
2.5.1. SDM Pin Mapping 2.5.2. MSEL Settings 2.5.3. Device Configuration Pins for Optional Configuration Signals
2.5.3. Device Configuration Pins for Optional Configuration Signals x
2.5.3.1. Specifying Optional Configuration Pins 2.5.3.2. Enabling Dual-Purpose Pins 2.5.3.3. I/O Standards and Features for Configuration Pins 2.5.3.4. SDM I/O Pins for Power Management and SmartVID 2.5.3.5. Specifying Pins for Partial Reconfiguration (PR)
2.5.3.1. Specifying Optional Configuration Pins x
2.5.3.1.1. nCONFIG 2.5.3.1.2. nSTATUS 2.5.3.1.3. CONF_DONE and INIT_DONE 2.5.3.1.4. SDM_IO Pins
2.5.3.3. I/O Standards and Features for Configuration Pins x
2.5.3.3.1. IBIS Model
2.6. Configuration Clocks x
2.6.1. Setting Configuration Clock Source 2.6.2. OSC_CLK_1 Clock Input
3. Intel Agilex® 7 Configuration Schemes x
3.1. Avalon-ST Configuration 3.2. AS Configuration 3.3. JTAG Configuration
3.1. Avalon-ST Configuration x
3.1.1. Avalon® -ST Configuration Scheme Hardware Components and File Types 3.1.2. Enabling Avalon-ST Device Configuration 3.1.3. The AVST_READY Signal 3.1.4. RBF Configuration File Format 3.1.5. Avalon-ST Single-Device Configuration 3.1.6. Debugging Guidelines for the Avalon® -ST Configuration Scheme 3.1.7. IP for Use with the Avalon® -ST Configuration Scheme: Parallel Flash Loader II Intel® FPGA IP Core
3.1.7. IP for Use with the Avalon® -ST Configuration Scheme: Parallel Flash Loader II Intel® FPGA IP Core x
3.1.7.1. Functional Description 3.1.7.2. Designing with the Parallel Flash Loader II Intel® FPGA IP for Avalon-ST Single Device Configuration 3.1.7.3. Generating the PFL II IP Core 3.1.7.4. Constraining the PFL II IP Core 3.1.7.5. Using the PFL II IP Core 3.1.7.6. Supported Flash Memory Devices
3.1.7.1. Functional Description x
3.1.7.1.1. Generating and Programming a .pof into CFI Flash 3.1.7.1.2. Implementing Multiple Pages in the Flash .pof 3.1.7.1.3. Storing Option Bits 3.1.7.1.4. Verifying the Option Bit Start and End Addresses 3.1.7.1.5. Implementing Page Mode and Option Bits in the CFI Flash Memory Device
3.1.7.2. Designing with the Parallel Flash Loader II Intel® FPGA IP for Avalon-ST Single Device Configuration x
3.1.7.2.1. PFL II Parameters 3.1.7.2.2. PFL II Signals
3.1.7.3. Generating the PFL II IP Core x
3.1.7.3.1. Controlling Avalon-ST Configuration with PFL II IP Core 3.1.7.3.2. Mapping PFL II IP Core and Flash Address 3.1.7.3.3. Creating a Single PFL II IP for Programming and Configuration 3.1.7.3.4. Creating Separate PFL II IP Functions
3.1.7.4. Constraining the PFL II IP Core x
3.1.7.4.1. PFL II IP Recommended Design Constraints to FPGA Avalon-ST Pins 3.1.7.4.2. PFL II IP Recommended Design Constraints for Using QSPI Flash 3.1.7.4.3. PFL II IP Recommended Design Constraints for using CFI Flash 3.1.7.4.4. PFL II IP Recommended Constraints for Other Input Pins 3.1.7.4.5. PFL II IP Recommended Constraints for Other Output Pins
3.1.7.5. Using the PFL II IP Core x
3.1.7.5.1. Converting .sof to .pof File 3.1.7.5.2. Programming CPLDs and Flash Memory Devices Sequentially 3.1.7.5.3. Programming CPLDs and Flash Memory Devices Separately 3.1.7.5.4. Defining New CFI Flash Memory Device
3.2. AS Configuration x
3.2.1. AS Configuration Scheme Hardware Components and File Types 3.2.2. AS Single-Device Configuration 3.2.3. AS Using Multiple Serial Flash Devices 3.2.4. AS Configuration Timing Parameters 3.2.5. Skew Tolerance Guidelines 3.2.6. Programming Serial Flash Devices 3.2.7. Serial Flash Memory Layout 3.2.8. AS_CLK 3.2.9. Active Serial Configuration Software Settings 3.2.10. Intel® Quartus® Prime Programming Steps 3.2.11. Debugging Guidelines for the AS Configuration Scheme
3.2.5. Skew Tolerance Guidelines x
3.2.5.1. Maximum Allowable External AS_DATA Pin Skew Delay Guidelines 3.2.5.2. Maximum Allowable External nCSO Pin Skew Delay Guidelines
3.2.6. Programming Serial Flash Devices x
3.2.6.1. Programming Serial Flash Devices using the AS Interface 3.2.6.2. Programming Serial Flash Devices using the JTAG Interface
3.2.7. Serial Flash Memory Layout x
3.2.7.1. Understanding Quad SPI Flash Byte-Addressing
3.2.10. Intel® Quartus® Prime Programming Steps x
3.2.10.1. Generating Programming Files using the Programming File Generator 3.2.10.2. Programming .pof files into Serial Flash Device 3.2.10.3. Programming .jic files into Serial Flash Device
3.3. JTAG Configuration x
3.3.1. JTAG Configuration Scheme Hardware Components and File Types 3.3.2. JTAG Device Configuration 3.3.3. JTAG Multi-Device Configuration 3.3.4. Debugging Guidelines for the JTAG Configuration Scheme
3.3.2. JTAG Device Configuration x
3.3.2.1. JTAG Single-Device Configuration using Download Cable Connections 3.3.2.2. JTAG Single-Device Configuration using a Microprocessor
3.3.3. JTAG Multi-Device Configuration x
3.3.3.1. JTAG Multi-Device Configuration using Download Cable
4. Including the Reset Release Intel® FPGA IP in Your Design x
4.1. Understanding the Reset Release IP Requirement 4.2. Instantiating the Reset Release IP In Your Design 4.3. Gating the PLL Reset Signal 4.4. Guidance When Using Partial Reconfiguration (PR) 4.5. Detailed Description of Device Configuration
4.5. Detailed Description of Device Configuration x
4.5.1. Device Initialization 4.5.2. Embedded Memory Block Initial Conditions 4.5.3. Protecting State Machine Logic
5. Remote System Update (RSU) x
5.1. Remote System Update Functional Description 5.2. Guidelines for Performing Remote System Update Functions for Non-HPS 5.3. Commands and Responses 5.4. Quad SPI Flash Layout 5.5. Generating Remote System Update Image Files Using the Programming File Generator 5.6. Remote System Update from FPGA Core Example 5.7. Debugging Guidelines for RSU Configuration
5.1. Remote System Update Functional Description x
5.1.1. RSU Glossary 5.1.2. Remote System Update Using AS Configuration 5.1.3. Remote System Update Configuration Images 5.1.4. Remote System Update Configuration Sequence 5.1.5. RSU Recovery from Corrupted Images 5.1.6. Updates with the Factory Update Image
5.3. Commands and Responses x
5.3.1. Operation Commands 5.3.2. Error Code Responses 5.3.3. Error Code Recovery
5.4. Quad SPI Flash Layout x
5.4.1. High Level Flash Layout 5.4.2. Detailed Quad SPI Flash Layout
5.4.1. High Level Flash Layout x
5.4.1.1. Standard (non-RSU) Image Layout in Flash 5.4.1.2. RSU Image Layout in Flash – SDM Perspective 5.4.1.3. RSU Image Layout – Your Perspective
5.4.1.2. RSU Image Layout in Flash – SDM Perspective x
5.4.1.2.1. Firmware Version Information
5.4.2. Detailed Quad SPI Flash Layout x
5.4.2.1. RSU Image Sub-Partitions Layout 5.4.2.2. Sub-Partition Table Layout 5.4.2.3. Configuration Pointer Block Layout 5.4.2.4. Modifying the List of Application Images
5.5. Generating Remote System Update Image Files Using the Programming File Generator x
5.5.1. Generating the Initial RSU Image 5.5.2. Generating an Application Image 5.5.3. Generating a Factory Update Image 5.5.4. Command Sequence To Perform Quad SPI Operations
5.5.1. Generating the Initial RSU Image x
5.5.1.1. Generating the Initial RSU Image Using SOF Files 5.5.1.2. Generating the Initial RSU Image Using RBF Files
5.6. Remote System Update from FPGA Core Example x
5.6.1. Prerequisites 5.6.2. Creating Initial Flash Image Containing Bitstreams for Factory Image and One Application Image 5.6.3. Programming Flash Memory with the Initial Remote System Update Image 5.6.4. Reconfiguring the Device with an Application or Factory Image 5.6.5. Adding an Application Image 5.6.6. Removing an Application Image
6. Intel Agilex® 7 Configuration Features x
6.1. Device Security 6.2. Configuration via Protocol 6.3. Partial Reconfiguration
7. Intel Agilex® 7 Debugging Guide x
7.1. Configuration Debugging Checklist 7.2. Intel Agilex® 7 Configuration Architecture Overview 7.3. Understanding Configuration Status Using quartus_pgm command 7.4. Configuration File Format Differences 7.5. Understanding SEUs 7.6. Reading the Unique 64-Bit CHIP ID 7.7. E-Tile Transceivers May Fail To Configure 7.8. Understanding and Troubleshooting Configuration Pin Behavior 7.9. Configuration Debugger Tool
1. Intel Agilex® 7 Configuration User Guide
2. Intel Agilex® 7 Configuration Details
3. Intel Agilex® 7 Configuration Schemes
4. Including the Reset Release Intel® FPGA IP in Your Design
5. Remote System Update (RSU)
6. Intel Agilex® 7 Configuration Features
7. Intel Agilex® 7 Debugging Guide
8. Intel Agilex® 7 Configuration User Guide Archives
9. Document Revision History for the Intel Agilex® 7 Configuration User Guide

3.1. Avalon-ST Configuration

The Avalon® -ST configuration scheme replaces the FPP mode available in earlier device families. Avalon® -ST is the fastest configuration scheme for Intel Agilex® 7 devices. This scheme uses an external host, such as a microprocessor, MAX® II, MAX® V, or Intel® MAX® 10 device to drive configuration. The external host controls the transfer of configuration data from external storage such as flash memory to the FPGA. The logic that controls the configuration process resides in the external host. You can use the PFL II IP with a MAX® II, MAX® V, or Intel® MAX® 10 device as the host to read configuration data from the flash memory device and configure the Intel Agilex® 7 device. The Avalon® -ST configuration scheme is called passive because the external host, not the Intel Agilex® 7 device, controls configuration.

Table 16.   Avalon® -ST Configuration Data Width, Clock Rates, and Data RatesMbps is an abbreviation for Megabits per second.
Protocol Data Width (bits) Max Clock Rate Max Data Rate MSEL[2:0]
Avalon® -ST 32 125 MHz 4000 Mbps 000
16 125 MHz 2000 Mbps 101
8 125 MHz 1000 Mbps 110
Table 17.  Required Configuration Signals for the Avalon® -ST Configuration Scheme You can use an 8-, 16-, or 32-bit Avalon-ST configuration data bus. You specify SDM I/O pin functions using the Device > Device and Pin Options > Configuration dialog box in the Intel® Quartus® Prime software. For the Avalon-ST x16 and x32 configuration, you can reassign the GPIO, dual-purpose configuration pins for other functions in user mode using the Device > Device and Pin Options > Dual-Purpose Pins dialog box.
Signal Name Pin Type Direction Powered by
nSTATUS SDM I/O Output VCCIO_SDM
nCONFIG SDM I/O Input VCCIO_SDM
MSEL[2:0] SDM I/O Input VCCIO_SDM
CONF_DONE 8 SDM I/O Output VCCIO_SDM
AVSTx8_READY SDM I/O Output VCCIO_SDM
AVST_READY GPIO, Dual-Purpose Output VCCIO
AVSTx8_DATA[7:0] SDM I/O Input VCCIO_SDM
AVSTx8_VALID SDM I/O Input VCCIO_SDM
AVSTx8_CLK SDM I/O Input VCCIO_SDM
AVST_DATA[31:0] GPIO, Dual-Purpose Input VCCIO
AVST_VALID GPIO, Dual-Purpose Input VCCIO
AVST_CLK GPIO, Dual-Purpose Input VCCIO

Refer to the Intel Agilex® 7 Data Sheet for configuration timing estimates.

The x16 and x32 modes use GPIO pins that only support the 1.2 V I/O standard. The SDM I/O pins require a 1.8 V power supply. Consequently, you may need a voltage-level translation between the FPGA and external host because of some signals, to accommodate both power requirements.
Attention: Access to the I/O pins located in bank 3A with pin index[91...95] is not allowed for the AVST x16 or x32 configuration scheme. You must leave these pins unconnected. For more information, refer to the device pin mapping files to identify the exact pin location.
Note: Although the INIT_DONE configuration signal is not required for configuration, Intel recommends that you use this signal. The SDM drives the INIT_DONE signal high to indicate the device is fully in user mode. This signal is important when debugging configuration.
Note: If you create custom logic instead of using the Parallel Flash Loader II Intel® FPGA IP to drive configuration, refer to the Avalon Streaming Interfaces in the Avalon Interface Specifications for protocol details.

Section Content
Avalon -ST Configuration Scheme Hardware Components and File Types
Enabling Avalon-ST Device Configuration
The AVST_READY Signal
RBF Configuration File Format
Avalon-ST Single-Device Configuration
Debugging Guidelines for the Avalon -ST Configuration Scheme
IP for Use with the Avalon -ST Configuration Scheme: Parallel Flash Loader II Intel FPGA IP Core

Related Information
8 CONF_DONE is required if you are using the Parallel Flash Loader II Intel® FPGA IP as the configuration host.
Level Two Title