Intel Agilex® 7 Configuration User Guide

ID 683673
Date 10/09/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.5.2. MSEL Settings

After power-on MSEL[2:0] pins specify the configuration scheme for Intel Agilex® 7 devices. Use 4.7-kΩ resistors to pull the MSEL[2:0] pins up to VCCIO_SDM or down to ground as required by the MSEL[2:0] setting for your configuration scheme.

Figure 8. MSEL Pull-Up and Pull-Down Circuit Diagram
Table 5.  MSEL Settings for Each Configuration Scheme of Intel Agilex® 7 Devices
Configuration Scheme MSEL[2:0]
Avalon-ST (x32) 000
Avalon-ST (x16) 101
Avalon-ST (x8) 110
AS (Fast mode – for CvP)4 device begins to access it. 001
AS (Normal mode)5. 011
JTAG only6 111
You must also specify the configuration scheme on the Configuration page of the Device and Pin Options dialog box in the Intel® Quartus® Prime Software.
Figure 9. Specify Configuration Scheme to Specify MSEL Value
4 If you use AS Fast mode, you must ramp all power supplies to the recommended operating condition within 10 ms. This ramp up requirement ensures that the AS x4 device is within its operating voltage range when the Intel Agilex® 7
5 If you use AS Normal mode, you must fully ramp the VCCIO_SDM supply to the recommended operating condition within 10 ms
6 JTAG configuration works with any valid MSEL settings, unless disabled for security.