Low Latency 40- and 100-Gbps Ethernet MAC and PHY MegaCore Function User Guide

Download PDF
ID 683628
Date 12/28/2017
Public
Document Table of Contents
Document Table of Contents x
1. About the Low Latency 40- and 100-Gbps Ethernet MAC and PHY IP Core 2. Getting Started 3. Functional Description 4. Debugging the Link A. Arria 10 10GBASE-KR Registers B. Differences Between Low Latency 40-100GbE IP Core and 40-100GbE IP Core v15.1 C. Additional Information
1. About the Low Latency 40- and 100-Gbps Ethernet MAC and PHY IP Core x
1.1. Low Latency 40- and 100-Gbps Ethernet MAC and PHY IP Core Supported Features 1.2. Low Latency 40-100GbE IP Core Device Family and Speed Grade Support 1.3. IP Core Verification 1.4. Performance and Resource Utilization 1.5. Release Information
1.2. Low Latency 40-100GbE IP Core Device Family and Speed Grade Support x
1.2.1. Device Family Support 1.2.2. Low Latency 40-100GbE IP Core Device Speed Grade Support
1.3. IP Core Verification x
1.3.1. Simulation Environment 1.3.2. Compilation Checking 1.3.3. Hardware Testing
1.4. Performance and Resource Utilization x
1.4.1. Stratix V Resource Utilization for Low Latency 40-100GbE IP Cores 1.4.2. Arria 10 Resource Utilization for Low Latency 40-100GbE IP Cores
2. Getting Started x
2.1. Installation and Licensing for LL 40-100GbE IP Core for Stratix V Devices 2.2. Licensing IP Cores 2.3. Specifying the Low Latency 40-100GbE IP Core Parameters and Options 2.4. IP Core Parameters 2.5. Files Generated for Stratix V Variations 2.6. Files Generated for Arria 10 Variations 2.7. Integrating Your IP Core in Your Design 2.8. Low Latency 40-100GbE IP Core Testbenches 2.9. Simulating the Low Latency 40‑100GbE IP Core With the Testbenches 2.10. Compiling the Full Design and Programming the FPGA 2.11. Initializing the IP Core
2.2. Licensing IP Cores x
2.2.1. OpenCore Plus IP Evaluation
2.7. Integrating Your IP Core in Your Design x
2.7.1. Pin Assignments 2.7.2. External Transceiver Reconfiguration Controller Required in Stratix V Designs 2.7.3. Transceiver PLL Required in Arria 10 Designs 2.7.4. External Time-of-Day Module for Variations with 1588 PTP Feature 2.7.5. Clock Requirements for 40GBASE-KR4 Variations 2.7.6. External TX MAC PLL 2.7.7. Placement Settings for the Low Latency 40-100GbE IP Core
2.8. Low Latency 40-100GbE IP Core Testbenches x
2.8.1. Low Latency 40-100GbE IP Core Testbench Overview 2.8.2. Understanding the Testbench Behavior
2.9. Simulating the Low Latency 40‑100GbE IP Core With the Testbenches x
2.9.1. Generating the Low Latency 40-100GbE Testbench 2.9.2. Optimizing the Low Latency 40‑100GbE IP Core Simulation With the Testbenches 2.9.3. Simulating with the Modelsim Simulator 2.9.4. Simulating with the NCSim Simulator 2.9.5. Simulating with the VCS Simulator 2.9.6. Testbench Output Example: Low Latency 40-100GbE IP Core
3. Functional Description x
3.1. High Level System Overview 3.2. Low Latency 40-100GbE MAC and PHY Functional Description 3.3. Signals 3.4. Software Interface: Registers 3.5. Ethernet Glossary
3.2. Low Latency 40-100GbE MAC and PHY Functional Description x
3.2.1. Low Latency 40-100GbE IP Core TX Datapath 3.2.2. Low Latency 40-100GbE IP Core TX Data Bus Interfaces 3.2.3. Low Latency 40-100GbE IP Core RX Datapath 3.2.4. Low Latency 40-100GbE IP Core RX Data Bus Interface 3.2.5. Low Latency 100GbE CAUI–4 PHY 3.2.6. External Reconfiguration Controller 3.2.7. External Transceiver PLL 3.2.8. External TX MAC PLL 3.2.9. Congestion and Flow Control Using Pause Frames 3.2.10. Pause Control and Generation Interface 3.2.11. Pause Control Frame Filtering 3.2.12. Link Fault Signaling Interface 3.2.13. Statistics Counters Interface 3.2.14. 1588 Precision Time Protocol Interfaces 3.2.15. PHY Status Interface 3.2.16. Transceiver PHY Serial Data Interface 3.2.17. Low Latency 40GBASE-KR4 IP Core Variations 3.2.18. Control and Status Interface 3.2.19. Arria 10 Transceiver Reconfiguration Interface 3.2.20. Clocks 3.2.21. Resets
3.2.1. Low Latency 40-100GbE IP Core TX Datapath x
3.2.1.1. Preamble, Start, and SFD Insertion 3.2.1.2. Address Insertion 3.2.1.3. Length/Type Field Processing 3.2.1.4. Frame Padding 3.2.1.5. Frame Check Sequence (CRC-32) Insertion 3.2.1.6. Inter‑Packet Gap Generation and Insertion 3.2.1.7. Error Insertion Test and Debug Feature
3.2.2. Low Latency 40-100GbE IP Core TX Data Bus Interfaces x
3.2.2.1. Low Latency 40-100GbE IP Core User Interface Data Bus 3.2.2.2. Low Latency 40-100GbE IP Core TX Data Bus with Adapters (Avalon-ST Interface) 3.2.2.3. Low Latency 40-100GbE IP Core TX Data Bus Without Adapters (Custom Streaming Interface) 3.2.2.4. Bus Quantization Effects With Adapters 3.2.2.5. User Interface to Ethernet Transmission
3.2.2.5. User Interface to Ethernet Transmission x
3.2.2.5.1. Order of Transmission
3.2.3. Low Latency 40-100GbE IP Core RX Datapath x
3.2.3.1. Low Latency 40-100GbE IP Core RX Filtering 3.2.3.2. 40-100GbE IP Core Preamble Processing 3.2.3.3. 40-100GbE IP Core FCS (CRC-32) Removal 3.2.3.4. 40-100GbE IP Core CRC Checking 3.2.3.5. LL 40-100GbE IP Core Malformed Packet Handling 3.2.3.6. RX CRC Forwarding 3.2.3.7. Inter-Packet Gap 3.2.3.8. Pause Ignore 3.2.3.9. Control Frame Identification
3.2.4. Low Latency 40-100GbE IP Core RX Data Bus Interface x
3.2.4.1. Low Latency 40-100GbE IP Core User Interface Data Bus 3.2.4.2. Low Latency 40-100GbE IP Core RX Data Bus 3.2.4.3. Low Latency 40-100GbE IP Core RX Data Bus Without Adapters (Custom Streaming Interface)
3.2.9. Congestion and Flow Control Using Pause Frames x
3.2.9.1. Conditions Triggering XOFF Frame Transmission 3.2.9.2. Conditions Triggering XON Frame Transmission
3.2.13. Statistics Counters Interface x
3.2.13.1. OctetOK Count Interface
3.2.14. 1588 Precision Time Protocol Interfaces x
3.2.14.1. Implementing a 1588 System That Includes a LL 40-100GbE IP Core 3.2.14.2. PTP Receive Functionality 3.2.14.3. PTP Transmit Functionality 3.2.14.4. External Time-of-Day Module for 1588 PTP Variations 3.2.14.5. PTP Timestamp and TOD Formats 3.2.14.6. 1588 PTP Interface Signals
3.3. Signals x
3.3.1. Low Latency 40-100GbE IP Core Signals
3.4. Software Interface: Registers x
3.4.1. Low Latency 40-100GbE IP Core Registers 3.4.2. LL 40‑100GbE Hardware Design Example Registers
3.4.1. Low Latency 40-100GbE IP Core Registers x
3.4.1.1. PHY Registers 3.4.1.2. Link Fault Signaling Registers 3.4.1.3. LL 40GBASE-KR4 Registers 3.4.1.4. Low Latency 40-100GbE IP Core MAC Configuration Registers 3.4.1.5. Pause Registers 3.4.1.6. TX Statistics Registers 3.4.1.7. RX Statistics Registers 3.4.1.8. 1588 PTP Registers
3.4.2. LL 40‑100GbE Hardware Design Example Registers x
3.4.2.1. Packet Client Registers
4. Debugging the Link x
4.1. Creating a SignalTap II Debug File to Match Your Design Hierarchy
A. Arria 10 10GBASE-KR Registers x
A.1. 10GBASE-KR PHY Register Definitions
C. Additional Information x
C.1. Low Latency 40- and 100-Gbps Ethernet MAC and PHY MegaCore Function User Guide Archives C.2. Low Latency 40- and 100-Gbps Ethernet MAC and PHY MegaCore Function User Guide Revision History C.3. How to Contact Altera C.4. Typographic Conventions
1. About the Low Latency 40- and 100-Gbps Ethernet MAC and PHY IP Core
2. Getting Started
3. Functional Description
4. Debugging the Link
A. Arria 10 10GBASE-KR Registers
B. Differences Between Low Latency 40-100GbE IP Core and 40-100GbE IP Core v15.1
C. Additional Information

2.8.2. Understanding the Testbench Behavior

The non-40GBASE-KR4 testbenches send traffic through the IP core in transmit-to-receive loopback mode, exercising the transmit side and receive side of the IP core in the same data flow. These testbenches send traffic to allow the Ethernet lanes to lock, and then send packets to the transmit client data interface and check the data as it returns through the receive client data interface.

The 40GBASE-KR4 testbench sends traffic through the two IP cores in each direction, exercising the receive and transmit sides of both IP cores. This testbench exercises auto-negotiation and link training, and then sends and checks packets in data mode.

The Low Latency 40-100GbE IP core implements virtual lanes as defined in theIEEE 802.3ba-2010 40G and 100G Ethernet Standard. The 40GbE IP cores are fixed at four virtual lanes and each lane is sent over a 10 Gbps physical lane. The 100GbE IP cores are fixed at 20 virtual lanes; the 20 virtual lanes are typically bit-interleaved over ten 10-Gbps physical lanes. When the lanes arrive at the receiver the lane streams are in an undefined order. Each lane carries a periodic PCS-VLANE alignment tag to restore the original ordering. The simulation establishes a random permutation of the physical lanes that is used for the remainder of the simulation.

Within each virtual lane stream, the data is 64B/66B encoded. Each word has two framing bits which are always either 01 or 10, never 00 or 11. The RX logic uses this pattern to lock onto the correct word boundaries in each serial stream. The process is probabilistic due to false locks on the pseudo-random scrambled stream. To reduce hardware costs, the receiver does not test alignments in parallel; consequently, the process can be somewhat time-consuming in simulation.

In the 40GBASE-KR4 testbench, some register values are set to produce a shorter runtime. For example, timeout counters and the number of steps used in link training are set to smaller values than would be prudent in hardware. To override this behavior and use the normal settings in simulation, add the following line to your IP core variation top-level file or to the testbench top-level file, alt_e40_avalon_kr4_tb.sv: 

`define ALTERA_RESERVED_XCVR_FULL_KR_TIMERS

Both the word lock and the alignment marker lock implement hysteresis as defined in the IEEE 802.3ba-2010 40G and 100G Ethernet Standard. Multiple successes are required to acquire lock and multiple failures are required to lose lock. The “fully locked” messages in the simulation log indicate the point at which a physical lane has successfully identified the word boundary and virtual lane assignment.

In the event of a catastrophic error, the RX PCS automatically attempts to reacquire alignment. The MAC properly identifies errors in the datastream.

Level Two Title