E-tile Hard IP Intel® Stratix® 10 Design Examples User Guide: Ethernet, CPRI PHY, and Dynamic Reconfiguration

Download PDF
ID 683578
Date 3/06/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. About E-tile Hard IP Design Examples 2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example 3. E-tile CPRI PHY Intel® FPGA IP Design Example 4. E-Tile Dynamic Reconfiguration Design Example 5. E-tile Hard IP Intel® Stratix® 10 Design Examples User Guide Archives
2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example x
2.1. E-Tile Hard IP for Ethernet Intel FPGA IP Quick Start Guide 2.2. 10GE/25GE with Optional RS-FEC Design Examples 2.3. 100GE with Optional RS-FEC Design Example 2.4. Ethernet Toolkit Overview 2.5. Document Revision History for the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example
2.1. E-Tile Hard IP for Ethernet Intel FPGA IP Quick Start Guide x
2.1.1. Directory Structure 2.1.2. Generating the Design 2.1.3. Simulating the E-Tile Hard IP for Ethernet Intel FPGA IP Design Example Testbench 2.1.4. Compiling the Compilation-Only Project 2.1.5. Compiling and Configuring the Design Example in Hardware 2.1.6. Testing the E-Tile Hard IP for Ethernet Intel FPGA IP Hardware Design Example
2.1.6. Testing the E-Tile Hard IP for Ethernet Intel FPGA IP Hardware Design Example x
2.1.6.1. 10GE/25GE Design Example 2.1.6.2. 100GE MAC+PCS with Optional (528,514) RS-FEC or (544,514) RS-FEC and Adaptation Flow Hardware Design Example 2.1.6.3. 100GE PCS Only with Optional (528,514) RS-FEC or (544,514) RS-FEC, and Optional PTP Hardware Design Example
2.2. 10GE/25GE with Optional RS-FEC Design Examples x
2.2.1. Simulation Design Examples 2.2.2. Hardware Design Examples 2.2.3. 10GE/25GE Design Example Interface Signals 2.2.4. 10GE/25GE Design Examples Registers
2.2.1. Simulation Design Examples x
2.2.1.1. Non-PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.2.1.2. PTP 10GE/25GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.2.1.3. 10GE/25GE PCS Only, OTN, or FlexE with Optional RS-FEC Simulation Design Example 2.2.1.4. 10GE/25GE Custom PCS with Optional RS-FEC Simulation Design Example
2.2.2. Hardware Design Examples x
2.2.2.1. 10GE/25GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example Components 2.2.2.2. 10GE/25GE PCS Only with Optional RS-FEC Hardware Design Example Components 2.2.2.3. 10GE/25GE Custom PCS with Optional RS-FEC Hardware Design Example
2.3. 100GE with Optional RS-FEC Design Example x
2.3.1. Simulation Design Examples 2.3.2. Hardware Design Examples 2.3.3. 100GE MAC+PCS with Optional RS-FEC Design Example Interface Signals 2.3.4. 100GE PCS with Optional RS-FEC Design Example Interface Signals 2.3.5. 100GE MAC+PCS with Optional RS-FEC Design Example Registers 2.3.6. 100GE PCS with Optional RS-FEC Design Example Registers
2.3.1. Simulation Design Examples x
2.3.1.1. Non-PTP E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC Simulation Design Example 2.3.1.2. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE MAC+PCS with Optional RS-FEC and PTP Simulation Design Example 2.3.1.3. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE PCS Only with Optional RS-FEC Simulation Design Example 2.3.1.4. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE OTN with Optional RS-FEC Simulation Design Example 2.3.1.5. E-Tile Hard IP for Ethernet Intel FPGA IP 100GE FlexE with Optional RS-FEC Simulation Design Example
2.3.2. Hardware Design Examples x
2.3.2.1. 100GE MAC+PCS with Optional RS-FEC and PMA Adaptation Flow Hardware Design Example Components 2.3.2.2. 100GE MAC+PCS with Optional RS-FEC and PTP Hardware Design Example 2.3.2.3. 100GE PCS with Optional RS-FEC Hardware Design Example Components
2.4. Ethernet Toolkit Overview x
2.4.1. Features
3. E-tile CPRI PHY Intel® FPGA IP Design Example x
3.1. E-tile CPRI PHY Intel® FPGA IP Quick Start Guide 3.2. E-tile CPRI PHY Design Example Description 3.3. Document Revision History for the E-tile CPRI PHY Intel® FPGA IP Design Example
3.1. E-tile CPRI PHY Intel® FPGA IP Quick Start Guide x
3.1.1. Hardware and Software Requirements 3.1.2. Generating the Design 3.1.3. Directory Structure 3.1.4. Simulating the Design Example Testbench 3.1.5. Compiling the Compilation-Only Project 3.1.6. Compiling and Configuring the Design Example in Hardware 3.1.7. Testing the E-tile CPRI PHY Intel® FPGA IP Hardware Design Example
3.2. E-tile CPRI PHY Design Example Description x
3.2.1. Features 3.2.2. Simulation Design Example 3.2.3. Hardware Design Example 3.2.4. Interface Signals 3.2.5. Design Example Register Map for Reconfiguration
4. E-Tile Dynamic Reconfiguration Design Example x
4.1. Quick Start Guide 4.2. 10G/25G Ethernet Dynamic Reconfiguration Design Examples 4.3. CPRI Dynamic Reconfiguration Design Examples 4.4. 25G Ethernet to CPRI Dynamic Reconfiguration Design Example 4.5. 100G Ethernet Dynamic Reconfiguration Design Example 4.6. Document Revision History for the E-tile Dynamic Reconfiguration Design Example
4.1. Quick Start Guide x
4.1.1. Directory Structure 4.1.2. Generating the Design 4.1.3. Simulating the E-Tile Dynamic Reconfiguration Design Example Testbench 4.1.4. Compiling and Configuring the Design Example in Hardware 4.1.5. Testing the E-tile Dynamic Reconfiguration Hardware Design Example
4.1.2. Generating the Design x
4.1.2.1. Design Example Parameters
4.1.3. Simulating the E-Tile Dynamic Reconfiguration Design Example Testbench x
4.1.3.1. Running the Simulation with Default HEX File 4.1.3.2. Running the Simulation with New HEX File 4.1.3.3. Performing the Link Initialization
4.1.5. Testing the E-tile Dynamic Reconfiguration Hardware Design Example x
4.1.5.1. Running the Design Example in Hardware 4.1.5.2. Power Management Setting for Stratix 10 E-Tile TX Transceiver Signal Integrity Development Kit
4.2. 10G/25G Ethernet Dynamic Reconfiguration Design Examples x
4.2.1. Functional Description 4.2.2. Simulation Design Examples 4.2.3. Hardware Design Examples 4.2.4. 10GE/25GE Design Example Interface Signals 4.2.5. 10GE/25GE Design Examples Registers 4.2.6. Dynamic Reconfiguration Flow for 25GbE PTP FEC to 25GbE PTP Non-FEC
4.2.1. Functional Description x
4.2.1.1. Clocking Scheme
4.2.2. Simulation Design Examples x
4.2.2.1. 10GE/25GE MAC+PCS with RS-FEC and PTP Simulation Dynamic Reconfiguration Design Example Components 4.2.2.2. 10GE/25GE MAC+PCS with RS-FEC Simulation Dynamic Reconfiguration Design Example Components
4.2.3. Hardware Design Examples x
4.2.3.1. 10GE/25GE MAC+PCS with RS-FEC and PTP Hardware Dynamic Reconfiguration Design Example Components 4.2.3.2. 10GE/25GE MAC+PCS with RS-FEC Hardware Dynamic Reconfiguration Design Example Components
4.3. CPRI Dynamic Reconfiguration Design Examples x
4.3.1. Functional Description 4.3.2. Simulation Design Examples 4.3.3. Hardware Design Examples 4.3.4. CPRI Design Example Interface Signals 4.3.5. CPRI Design Example Registers 4.3.6. Dynamic Reconfiguration Flow for 24G CPRI FEC to 24G CPRI Non-FEC
4.3.1. Functional Description x
4.3.1.1. Clocking Scheme
4.3.2. Simulation Design Examples x
4.3.2.1. 24G CPRI PHY with RS-FEC Simulation Dynamic Reconfiguration Design Example Components 4.3.2.2. 9.8G CPRI PHY Simulation Dynamic Reconfiguration Design Example Components
4.3.3. Hardware Design Examples x
4.3.3.1. CPRI PHY with RS-FEC Hardware Dynamic Reconfiguration Design Example Components
4.4. 25G Ethernet to CPRI Dynamic Reconfiguration Design Example x
4.4.1. Functional Description 4.4.2. Simulation Design Examples 4.4.3. Hardware Design Examples 4.4.4. 25G Ethernet to CPRI Design Example Interface Signals 4.4.5. 25G Ethernet to CPRI Design Examples Registers 4.4.6. Dynamic Reconfiguration Flow for 25GbE PTP FEC to 24G CPRI FEC
4.4.1. Functional Description x
4.4.1.1. Clocking Scheme 4.4.1.2. Reset
4.4.2. Simulation Design Examples x
4.4.2.1. 25GE MAC+PCS with RS-FEC and PTP to CPRI Simulation Dynamic Reconfiguration Design Example Components
4.4.3. Hardware Design Examples x
4.4.3.1. 25GE MAC+PCS with RS-FEC and PTP to CPRI Hardware Dynamic Reconfiguration Design Example Components
4.5. 100G Ethernet Dynamic Reconfiguration Design Example x
4.5.1. Functional Description 4.5.2. Testing the 100G Ethernet Dynamic Reconfiguration Hardware Design Example 4.5.3. Simulation Design Examples 4.5.4. 100GE DR Hardware Design Examples 4.5.5. 100G Ethernet Dynamic Reconfiguration Design Example Interface Signals 4.5.6. 100G Ethernet Dynamic Reconfiguration Examples Registers 4.5.7. Steps to Enable FEC 4.5.8. Steps to Disable FEC
4.5.3. Simulation Design Examples x
4.5.3.1. 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Simulation Design Example
4.5.4. 100GE DR Hardware Design Examples x
4.5.4.1. 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Hardware Design Example Components
1. About E-tile Hard IP Design Examples
2. E-Tile Hard IP for Ethernet Intel FPGA IP Design Example
3. E-tile CPRI PHY Intel® FPGA IP Design Example
4. E-Tile Dynamic Reconfiguration Design Example
5. E-tile Hard IP Intel® Stratix® 10 Design Examples User Guide Archives

2.1.6.1. 10GE/25GE Design Example

This section applies to 10G/25G Ethernet MAC+PCS with optional RS-FEC and optional PTP, 10G/25G Ethernet PCS only with optional RS-FEC, and 10G/25G Ethernet custom PCS with optional RS-FEC hardware design examples.

To turn on the System Console and test the hardware design example, follow these steps:

  1. After the hardware design example is configured on the Intel® Stratix® 10 device, in the Intel® Quartus® Prime Pro Edition software, on the Tools menu, click In-System Sources and Probes Editor.

Figure 5.  In-System Sources and Probes Editor

  1. In the JTAG Chain Configuration window, select the USB connection that is connected to the development kit.
  2. Next, from the Device list, select the device with 1ST280EY string in the name. The Ready to acquire status appears at the bottom of the Instance Manager window if the correct device is selected.
  3. A list of instances appears once the connection is acquired. There are four sources under index 0. These sources have the following connections:
    Source Signal
    source[3] sl_csr_rst_n (active low)
    source[2] sl_tx_rst_n (active low)
    source[1] sl_rx_rst_n (active low)
    source[0] i_reconfig_reset (active high)
  4. Toggle source[0] to initiate reset for the transceiver and Ethernet reconfiguration interfaces.
  5. Once the reset is initiated, on the Tools menu, click System Debugging Tools > System Console.
  6. In the Tcl Console pane, type cd hwtest_sl to change directory to <design_example_dir>/hardware_test_design/hwtest_sl.
  7. Type set <command_setting> to configure the test according to your design configuration:
    Command Setting Description
    totalChannel Set this value according to the value of Number of Channels of 10GE/25GE parameter in your design. The default value is 1.

    Example, in the system console type set totalChannel 2 to change the number of channels to 2.

    Note: E-Tile Hard IP for Ethernet Intel FPGA IP does not support multichannel PCS variation.
    jtag_port_id Set this value to the JTAG port ID that is connected to the development kit.

    Example, in the system console type set jtag_port_id 0 to change the JTAG ID to 0.

    enableILB Set this to 1 to enable Internal Serial Loopback. The default value is 1.

    Example, in the system console, type set enableILB 0 to disable Internal Serial Loopback.

    enablePTP Set this to 1 if PTP is enabled in the design. Otherwise set the value to 0. The default value is 0.

    Example, in the system console type set enablePTP 1 to enable PTP.

    speed Choose the following option according to the design example variation:
    • 10G for 10 Gbps data rate
    • 25G for 25 Gbps data rate
    • 25G_fec for 25 Gbps data rate with RS-FEC enabled
    • pcsonly for PCS only and custom PCS designs
    • pcsonly_fec for PCS only and custom PCS designs with RS-FEC enabled

    Example, in the system console type set speed 25G_fec to set the data rate to 25G with RS-FEC enabled.

    PMAadaptation Set this to 1 if Enable adaptation load soft IP parameter is enabled in your design. Otherwise, set the value to 0. The default value is 0.
    PMAConfig Set the PMA configuration number to enable PMA adaptation. The PMA configuration number set must be one of the PMA configurations defined in your design.
    EnhancedPTPAccuracy Set this to 1 if Advanced PTP Accuracy Mode is enabled in the design. Otherwise set the value to 0. The default value is 0.

    Example, in the system console type set EnhancedPTPAccuracy 1 to enable Advanced PTP Accuracy Mode.

  8. Type source main_script.tcl to enable the internal loopback and run the test.
Configuring the 10GE/25GE MAC+PCS with optional RS-FEC and optional PTP hardware test in System Console: 
% set totalChannel 1
1
% set jtag_port_id 0
0
% set enablePTP 0
0
% set speed 25G
25G
% set PMAadaptation 1
1
% set PMAConfig 0
0
% source main_script.tcl
Info: Number of Channels = 1
Info: JTAG Port ID       = 0
Info: PTP Enable         = 0
Info: Speed              = 25G
Info: PMA Adaptation	= 1
Info: PMAConfig Number   = 0

Set the speed to pcsonly to configure 10GE/25GE PCS only with optional RS-FEC hardware test. Set the speed to pcsonly_fec to configure 10G/25G custom PCS with optional RS-FEC hardware test.

Related Information
Level Two Title