Multi Channel DMA for PCI Express* Intel® FPGA IP Design Example User Guide

ID 683517
Date 12/01/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.5.2.4.2. Install PMD and Test Application

  1. Download dpdk and apply the build patches.

    Execute the following commands with root as user.

    $ cd software/dpdk/patches/v20.05-rc1

    $ sh apply-patch.sh
    Note: If you are using higher kernel versions in Ubuntu, apply the below patch.
    $cd dpdk
    $git apply ../mcdma-Ubuntu-21.04-Compilation-Fix-patch
  2. Enable the following parameters in the build configuration.

    Update the following macro in ./config/common_base to “y”. By default, igb_uio is disabled.

    CONFIG_RTE_EAL_IGB_UIO=y

  3. Build DPDK and install.
    Execute the following steps:
    • $ export DPDK_DIR= <cloned dir>/software/dpdk/patches/v20.05-rc1/dpdk
    • $ export RTE_SDK=${DPDK_DIR}
    • $ export DPDK_TARGET=x86_64-native-linuxapp-gcc
    • $ export RTE_TARGET=x86_64-native-linuxapp-gcc
    • $ export DPDK_BUILD=$DPDK_DIR/$DPDK_TARGET
    • $ make config T=x86_64-native-linuxapp-gcc
    • $ rm -rf x86_64-native-linuxapp-gcc
    • $ make -j32 install T=$DPDK_TARGET DESTDIR=install
  4. Execute the following steps if proceeding with UIO support.

    Install UIO base module.

    $ modprobe uio

    Install igb_uio module.

    $ insmod x86_64-native-linuxapp-gcc/build/kernel/linux/igb_uio/igb_uio.ko

    Bind the device to the igb_uio driver.

    $ ./usertools/dpdk-devbind.py -b igb_uio <BDF>

  5. Build the reference application.

    $ cd examples/mcdma-test/perfq/

    $ make clean all

    $ make