R-tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide

Download PDF
ID 683501
Date 10/06/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Introduction 2. IP Architecture and Functional Description 3. Parameters 4. Interfaces 5. Advanced Features 6. R-tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives 7. Document Revision History for the R-tile Avalon® Streaming Intel FPGA IP for PCI Express User Guide A. Configuration Space Registers B. Root Port Enumeration C. Implementation of Address Translation Services (ATS) in Endpoint Mode D. Packets Forwarded to the User Application in TLP Bypass Mode
1. Introduction x
1.1. Overview 1.2. Features 1.3. Release Information 1.4. Device Family Support 1.5. Performance and Resource Utilization 1.6. IP Core Support Levels
1.1. Overview x
1.1.1. Standards and Specifications Compliance
2. IP Architecture and Functional Description x
2.1. Overview 2.2. PCIe Hard IP Mode 2.3. PIPE Direct Mode
2.2. PCIe Hard IP Mode x
2.2.1. Clocking 2.2.2. Reset 2.2.3. PCI Express Protocol Stack
2.2.3. PCI Express Protocol Stack x
2.2.3.1. PMA/PCS 2.2.3.2. Data Link Layer Overview 2.2.3.3. Transaction Layer Overview
2.3. PIPE Direct Mode x
2.3.1. Clocking 2.3.2. Reset 2.3.3. PIPE Layer
3. Parameters x
3.1. Top-Level Settings 3.2. Core Parameters
4. Interfaces x
4.1. Overview 4.2. Clocks and Resets 4.3. Serial Data Interface 4.4. PCI Express Mode 4.5. PIPE Direct Mode
4.2. Clocks and Resets x
4.2.1. Clocks 4.2.2. Resets
4.4. PCI Express Mode x
4.4.1. Avalon® Streaming Interface 4.4.2. Precision Time Measurement (PTM) Interface 4.4.3. Interrupt Interface 4.4.4. Hard IP Reconfiguration Interface 4.4.5. Error Interface 4.4.6. Completion Timeout Interface 4.4.7. Configuration Intercept Interface 4.4.8. Power Management Interface 4.4.9. Hard IP Status Interface 4.4.10. Page Request Services (PRS) Interface 4.4.11. Function-Level Reset (FLR) Interface 4.4.12. SR-IOV VF Error Flag Interface 4.4.13. General Purpose VSEC Interface
4.4.1. Avalon® Streaming Interface x
4.4.1.1. TLP Header and Data Alignment for the Avalon® streaming RX and TX Interfaces 4.4.1.2. Credit Control 4.4.1.3. Avalon® Streaming RX Interface 4.4.1.4. Avalon® Streaming TX Interface 4.4.1.5. Tag Allocation
4.4.1.2. Credit Control x
4.4.1.2.1. Credit Interface - Data and Header 4.4.1.2.2. Credit Initialization 4.4.1.2.3. Credit Update/Release 4.4.1.2.4. RX Flow Control Interface 4.4.1.2.5. TX Flow Control Interface
4.4.1.2.4. RX Flow Control Interface x
4.4.1.2.4.1. Completion Buffer Size
4.4.1.4. Avalon® Streaming TX Interface x
4.4.1.4.1. Avalon® Streaming TX Interface tx_st_ready_o Behavior
4.4.3. Interrupt Interface x
4.4.3.1. Legacy Interrupts 4.4.3.2. MSI 4.4.3.3. MSI-X
4.4.3.3. MSI-X x
4.4.3.3.1. Implementing MSI-X Interrupts
4.4.8. Power Management Interface x
4.4.8.1. Endpoint D3Hot Entry 4.4.8.2. Endpoint D3Hot Exit
4.5. PIPE Direct Mode x
4.5.1. Data Signals 4.5.2. Message Channel 4.5.3. Deskew Channel 4.5.4. PIPE Direct Reset Sequence 4.5.5. PIPE Direct Speed Change 4.5.6. PIPE Lane Reset Staggering 4.5.7. Unused Lanes in PIPE Direct Mode 4.5.8. PIPE Direct Mode TX/RX Datapaths
4.5.1. Data Signals x
4.5.1.1. Transmit Signals 4.5.1.2. Receive Signals
5. Advanced Features x
5.1. PCIe Port Bifurcation and PHY Channel Mapping 5.2. Virtualization Support 5.3. TLP Bypass Mode
5.2. Virtualization Support x
5.2.1. SR-IOV Support 5.2.2. VirtIO Support
5.2.1. SR-IOV Support x
5.2.1.1. SR-IOV Supported Features List 5.2.1.2. Implementation 5.2.1.3. VF to PF Mapping 5.2.1.4. Function Level Reset (FLR)
5.2.1.2. Implementation x
5.2.1.2.1. VF Error Flag Interface (for x16/x8 Cores Only)
5.2.2. VirtIO Support x
5.2.2.1. VirtIO Supported Features List 5.2.2.2. Overview 5.2.2.3. Parameters 5.2.2.4. VirtIO PCI Configuration Access Interface 5.2.2.5. Registers
5.2.2.5. Registers x
5.2.2.5.1. VirtIO Common Configuration Capability Register (Address: 0x012) 5.2.2.5.2. VirtIO Common Configuration BAR Indicator Register (Address: 0x013) 5.2.2.5.3. VirtIO Common Configuration BAR Offset Register (Address: 0x014) 5.2.2.5.4. VirtIO Common Configuration Structure Length Register (Address 0x015) 5.2.2.5.5. VirtIO Notifications Capability Register (Address: 0x016) 5.2.2.5.6. VirtIO Notifications BAR Indicator Register (Address: 0x017) 5.2.2.5.7. VirtIO Notifications BAR Offset Register (Address: 0x018) 5.2.2.5.8. VirtIO Notifications Structure Length Register (Address: 0x019) 5.2.2.5.9. VirtIO Notifications Notify Off Multiplier Register (Address: 0x01A) 5.2.2.5.10. VirtIO ISR Status Capability Register (Address: 0x02F) 5.2.2.5.11. VirtIO ISR Status BAR Indicator Register (Address: 0x030) 5.2.2.5.12. VirtIO ISR Status BAR Offset Register (Address: 0x031) 5.2.2.5.13. VirtIO ISR Status Structure Length Register (Address: 0x032) 5.2.2.5.14. VirtIO Device Specific Capability Register (Address: 0x033) 5.2.2.5.15. VirtIO Device Specific BAR Indicator Register (Address: 0x034) 5.2.2.5.16. VirtIO Device Specific BAR Offset Register (Address 0x035) 5.2.2.5.17. VirtIO Device Specific Structure Length Register (Address: 0x036) 5.2.2.5.18. VirtIO PCI Configuration Access Capability Register (Address: 0x037) 5.2.2.5.19. VirtIO PCI Configuration Access BAR Indicator Register (Address: 0x038) 5.2.2.5.20. VirtIO PCI Configuration Access BAR Offset Register (Address: 0x039) 5.2.2.5.21. VirtIO PCI Configuration Access Structure Length Register (Address: 0x03A) 5.2.2.5.22. VirtIO PCI Configuration Access Data Register (Address: 0x03B)
5.3. TLP Bypass Mode x
5.3.1. Overview 5.3.2. Register Settings for the TLP Bypass Mode 5.3.3. User Avalon Memory-mapped Interface 5.3.4. Avalon® Streaming Interface
5.3.2. Register Settings for the TLP Bypass Mode x
5.3.2.1. TLPBYPASS_ERR_EN (Address 0x1314) 5.3.2.2. TLPBYPASS_ERR_STATUS (Address 0x1310)
5.3.4. Avalon® Streaming Interface x
5.3.4.1. Configuration TLP 5.3.4.2. Transmit Interface 5.3.4.3. Receive Interface 5.3.4.4. Malformed TLP 5.3.4.5. ECRC
C. Implementation of Address Translation Services (ATS) in Endpoint Mode x
C.1. Sending Translated/Untranslated Requests C.2. Sending a Page Request Message from the Endpoint (EP) to the Root Complex (RC) C.3. Invalidating Requests/Completions
D. Packets Forwarded to the User Application in TLP Bypass Mode x
D.1. EP TLP Bypass Mode (Upstream) D.2. RC TLP Bypass Mode (Downstream)
1. Introduction
2. IP Architecture and Functional Description
3. Parameters
4. Interfaces
5. Advanced Features
6. R-tile Avalon® Streaming Intel® FPGA IP for PCI Express* User Guide Archives
7. Document Revision History for the R-tile Avalon® Streaming Intel FPGA IP for PCI Express User Guide
A. Configuration Space Registers
B. Root Port Enumeration
C. Implementation of Address Translation Services (ATS) in Endpoint Mode
D. Packets Forwarded to the User Application in TLP Bypass Mode

5.2.2.4. VirtIO PCI Configuration Access Interface

To access a VirtIO device region, pci_cfg_data will provide a window of size cap.length (1, 2 or 4 Bytes) into the given cap.bar (0x0 – 0x5) at offset cap.offset (multiple of cap.length). Detailed interfaces mapping for the user application logic are shown in the following table.

As for the VirtIO device, upon detecting a driver write access to pci_cfg_data, the user application side's VirtIO device must execute a write access at cap.offset at the BAR selected by cap.bar using the first cap.length bytes from pci_cfg_data. Moreover, upon detecting a driver read access to pci_cfg_data, the user application side's VirtIO device must execute a read access of length cap.length at cap.offset at the BAR selected by cap.bar and store the first cap.length bytes in pci_cfg_data.

Note: Only Ports 0 and 1 support VirtIO.
Table 53.  VirtIO PCI Configuration Access Interface
Name Direction Description Clock Domain
pX_virtio_pcicfg_vfaccess_o where X = 0, 1 O

Indicates the driver access is to a VF.

The corresponding Virtual Function is identified from the value of virtio_pcicfg_vfnum_o.

slow_clk
pX_virtio_pcicfg_vfnum_o[VFNUM_WIDTH-1:0] where X = 0, 1 O

Indicates the corresponding Virtual Function number associated with the current Physical Function that the driver’s write or read access is targeting.

Validated by virtio_pcicfg_vfaccess_o and by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

slow_clk
pX_virtio_pcicfg_pfnum_o[PFNUM_WIDTH-1:0] where X = 0, 1 O

Indicates the corresponding Physical Function number that the driver’s write or read access is targeting.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

slow_clk
pX_virtio_pcicfg_bar_o[7:0] where X = 0, 1 O

Indicates the BAR holding the PCI configuration access structure. The driver sets the BAR to access by writing to cap.bar. Values 0x0 to 0x5 specify a BAR belonging to the function located beginning at 10h in the PCI Configuration Space. The BAR can be either 32-bit or 64-bit.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_length_o[31:0] where X = 0, 1 O

Indicates the length of the structure. The length may include padding, or fields unused by the driver, or future extensions. The driver sets the size of the access by writing 1, 2 or 4 to cap.length.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_baroffset_o[31:0] where X = 0, 1 O

Indicates where the structure begins relative to the base address associated with the BAR. The driver sets the offset within the BAR by writing to cap.offset.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_cfgdata_o[31:0] where X = 0, 1 O

Indicates the data for BAR access. The pci_cfg_data will provide a window of size cap.length into the given cap.bar at offset cap.offset.

Validated by driver write access to pci_cfg_data, or driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_cfgwr_o where X = 0, 1 O

Indicates driver write access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_cfgrd_o where X = 0, 1 O

Indicates driver read access to pci_cfg_data.

The corresponding PF or VF is identified from the value of virtio_pcicfg_p/vfnum_o.

slow_clk
pX_virtio_pcicfg_appvfnum_i[VFNUM_WIDTH-1:0] where X = 0, 1 I

Indicates the corresponding Virtual Function number associated with the current Physical Function that the application config data storage is for.

Validated by virtio_pcicfg_rdack_i.

slow_clk
pX_virtio_pcicfg_apppfnum_i[PFNUM_WIDTH-1:0] where X = 0, 1 I

Indicates the corresponding Physical Function number that the application config data storage is for.

Validated by virtio_pcicfg_rdack_i.

slow_clk
pX_virtio_pcicfg_rdack_i where X = 0, 1 I

Indicates an application read access data ack to store the config data in pci_cfg_data. Usually the reasonable ack latency is no more than 10 cycles.

The corresponding Virtual Function is identified from the value of virtio_pcicfg_appvfnum_i.

slow_clk
pX_virtio_pcicfg_rdbe_i[3:0] where X = 0, 1 I

Indicates application enabled bytes within virtio_pcicfg_data_i.

Validated by virtio_pcicfg_rdack_i.

The corresponding Virtual Function is identified from the value of virtio_pcicfg_appvfnum_i.

For the current implementation of the Hard IP, these signals are tied high.

 slow_clk
pX_virtio_pcicfg_data_i[31:0] where X = 0, 1 I

Indicates application data to be stored in PCI Configuration Access data registers.

Validated by virtio_pcicfg_rdack_i and virtio_pcicfg_rdbe_i.

The corresponding Virtual Function is identified from the value of virtio_pcicfg_appvfnum_i.

slow_clk
Level Two Title