Visible to Intel only — GUID: jzi1641417473168
Ixiasoft
3.1. 843819: Memory Locations May be Accessed Speculatively Due to Instruction Fetches When HCR.VM is Set
3.2. 845719: A Load May Read Incorrect Data
3.3. 855871: ETM Does Not Report IDLE State When Disabled Using OSLOCK
3.4. 855872: A Store-Exclusive Instruction May Pass When it Should Fail
3.5. 711668: Configuration Extension Register Has Wrong Value Status
3.6. 720107: Periodic Synchronization Can Be Delayed and Cause Overflow
3.7. 855873: An Eviction Might Overtake a Cache Clean Operation
3.8. 853172: ETM May Assert AFREADY Before All Data Has Been Output
3.9. 836870: Non-Allocating Reads May Prevent a Store Exclusive From Passing
3.10. 836919: Write of the JMCR in EL0 Does Not Generate an UNDEFINED Exception
3.11. 845819: Instruction Sequences Containing AES Instructions May Produce Incorrect Results
3.12. 851672: ETM May Trace an Incorrect Exception Address
3.13. 851871: ETM May Lose Counter Events While Entering WFx Mode
3.14. 852071: Direct Branch Instructions Executed Before a Trace Flush May be Output in an Atom Packet After Flush Acknowledgment
3.15. 852521: A64 Unconditional Branch May Jump to Incorrect Address
3.16. 855827: PMU Counter Values May Be Inaccurate When Monitoring Certain Events
3.17. 855829: Reads of PMEVCNTR<n> are not Masked by HDCR.HPMN
3.18. 855830: Loads of Mismatched Size May not be Single-Copy Atomic
Visible to Intel only — GUID: jzi1641417473168
Ixiasoft
2.2.1. M20K Simple Quad-Port Mode Support
Description
For the Intel® Stratix® 10 devices listed below, the M20K Simple Quad-Port (SQP) mode is defeatured and not supported in the Intel® Quartus® Prime Pro Edition software version 21.4 or later.
Workaround
None.
Status
Affects:
- Intel® Stratix® 10 Devices with Fixed Voltage:
- 1SxxxxxxxxxxE2Lx
- 1SxxxxxxxxxxE3Xx
- 1SxxxxxxxxxxI2Lx
- 1SxxxxxxxxxxI3Xx
- 1SxxxxxxxxxxC2Lx
- Intel® Stratix® 10 Devices with Industrial Grade Smart VID:
- 1SxxxxxxxxxxI1Vx
- 1SxxxxxxxxxxI2Vx
- 1SxxxxxxxxxxI3Vx
Status: No planned fix.