DSP Builder for Intel® FPGAs (Advanced Blockset): Handbook

Download PDF
ID 683337
Date 5/01/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. Answers to Top FAQs 2. About DSP Builder for Intel® FPGAs 3. DSP Builder for Intel FPGAs Advanced Blockset Getting Started 4. DSP Builder Design Flow 5. Primitive Library Blocks Tutorial 6. IP Tutorial 7. DSP Builder for Intel FPGAs (Advanced Blockset) Design Examples and Reference Designs 8. DSP Builder Design Rules, Design Recommendations, and Troubleshooting 9. About DSP Builder for Intel FPGAs Optimization 10. About Folding 11. Floating-Point Data Types 12. Design Configuration Library 13. IP Library 14. Interfaces Library 15. Primitives Library 16. Utilities Library 17. Simulink Supported Blocks 18. Document Revision History for DSP Builder for Intel FPGAs (Advanced Blockset) Handbook
2. About DSP Builder for Intel® FPGAs x
2.1. DSP Builder for Intel® FPGAs Features 2.2. DSP Builder for Intel® FPGAs Design Structure 2.3. DSP Builder for Intel® FPGAs Libraries 2.4. DSP Builder for Intel® FPGAs Device Support 2.5. FPGA Architecture Features for DSP Designs 2.6. DSP Design Flow in FPGAs 2.7. Software and Hardware DSP Design Flows in FPGAs
3. DSP Builder for Intel FPGAs Advanced Blockset Getting Started x
3.1. Installing DSP Builder for Intel® FPGAs 3.2. Licensing DSP Builder for Intel® FPGAs 3.3. Starting DSP Builder in MATLAB* 3.4. Browsing DSP Builder Libraries and Adding Blocks to a New Model 3.5. Browsing and Opening DSP Builder Design Examples 3.6. Creating a New DSP Builder Design with the DSP Builder New Model Wizard 3.7. Simulating, Verifying, Generating, and Compiling Your DSP Builder Design
3.6. Creating a New DSP Builder Design with the DSP Builder New Model Wizard x
3.6.1. DSP Builder Menu Options 3.6.2. DSP Builder New Model Wizard Setup Script Parameters
4. DSP Builder Design Flow x
4.1. Implementing your Design in DSP Builder Advanced Blockset 4.2. Verifying your DSP Builder Advanced Blockset Design in Simulink and MATLAB 4.3. Exploring DSP Builder Advanced Blockset Design Tradeoffs 4.4. Verifying your DSP Builder Design with C++ Software Models 4.5. Verifying your DSP Builder Advanced Blockset Design in the ModelSim Simulator 4.6. Verifying Your DSP Builder Design in Hardware 4.7. Integrating Your DSP Builder Advanced Blockset Design into Hardware
4.1. Implementing your Design in DSP Builder Advanced Blockset x
4.1.1. Dividing your DSP Builder Design into Subsystems 4.1.2. Connecting DSP Builder Subsystems 4.1.3. Creating a New Design by Copying a DSP Builder Design Example 4.1.4. Vectorized Inputs
4.1.2. Connecting DSP Builder Subsystems x
4.1.2.1. DSP Builder Block Interface Signals 4.1.2.2. Periods 4.1.2.3. Sample Rate 4.1.2.4. Building Multichannel Systems 4.1.2.5. Channelization for Two Channels with a Folding Factor of 3 4.1.2.6. Channelization for Four Channels with a Folding Factor of 3 4.1.2.7. Synchronization and Scheduling of Data with the Channel Signal 4.1.2.8. Simulink vs Hardware Design Representations
4.1.2.1. DSP Builder Block Interface Signals x
4.1.2.1.1. Multichannel Systems with IP Library Blocks 4.1.2.1.2. Valid, Channel, and Data Examples
4.1.2.4. Building Multichannel Systems x
4.1.2.4.1. Multichannel Systems with IP Library Blocks
4.1.3. Creating a New Design by Copying a DSP Builder Design Example x
4.1.3.1. Creating a New Design From the DSP Builder FIR Design Example and Changing the Namespaces
4.2. Verifying your DSP Builder Advanced Blockset Design in Simulink and MATLAB x
4.2.1. Verifying your DSP Builder Advanced Blockset Design with a Testbench 4.2.2. Running DSP Builder Advanced Blockset Automatic Testbenches 4.2.3. Using DSP Builder Advanced Blockset References 4.2.4. Setting Up Stimulus in DSP Builder Advanced Blockset 4.2.5. Analyzing your DSP Builder Advanced Blockset Design
4.2.1. Verifying your DSP Builder Advanced Blockset Design with a Testbench x
4.2.1.1. Visualization Features
4.2.2. Running DSP Builder Advanced Blockset Automatic Testbenches x
4.2.2.1. dspba.runModelsimATB 4.2.2.2. Running All Automatic Testbenches 4.2.2.3. The command run_all_atbs Command Syntax 4.2.2.4. Testbench Error Messages
4.3. Exploring DSP Builder Advanced Blockset Design Tradeoffs x
4.3.1. Bit Growth 4.3.2. Managing Bit Growth in DSP Builder Advanced Blockset Designs 4.3.3. Using Rounding and Saturation in DSP Builder Advanced Blockset Designs 4.3.4. Scaling with Primitive Blocks 4.3.5. Changing Data Type with Convert Blocks and Specifying Output Types
4.3.5. Changing Data Type with Convert Blocks and Specifying Output Types x
4.3.5.1. The Convert Block and Real-world Values 4.3.5.2. Output Data Types on Primitive Blocks
4.4. Verifying your DSP Builder Design with C++ Software Models x
4.4.1. Software Model Options 4.4.2. Software Model Generated Files 4.4.3. Software Model Compilers 4.4.4. Compiling Testbenches and Model Libraries 4.4.5. Testing the Software Model 4.4.6. MATLAB MEX Function Wrapper for a Generated Software Model
4.4.5. Testing the Software Model x
4.4.5.1. Linking to External Libraries
4.4.6. MATLAB MEX Function Wrapper for a Generated Software Model x
4.4.6.1. Driving the Model 4.4.6.2. MEX Model Code 4.4.6.3. Complete the MEX Function 4.4.6.4. Compile, Run, and Test the MEX Function
4.5. Verifying your DSP Builder Advanced Blockset Design in the ModelSim Simulator x
4.5.1. Automatic Testbench 4.5.2. DSP Builder Advanced Blockset ModelSim Simulations
4.5.1. Automatic Testbench x
4.5.1.1. DSP Builder Advanced Blockset Automatic Testbench Files
4.6. Verifying Your DSP Builder Design in Hardware x
4.6.1. Hardware Verification
4.6.1. Hardware Verification x
4.6.1.1. Hardware Verification Design Example
4.7. Integrating Your DSP Builder Advanced Blockset Design into Hardware x
4.7.1. DSP Builder Generated Files 4.7.2. DSP Builder Designs and the Quartus Prime Project 4.7.3. Interfaces with a Processor Bus 4.7.4. DSP Builder Designs in Platform Designer
4.7.2. DSP Builder Designs and the Quartus Prime Project x
4.7.2.1. Adding a DSP Builder Advanced Blockset Design to an Existing Quartus Prime Project
4.7.3. Interfaces with a Processor Bus x
4.7.3.1. Assigning Base Addresses in DSP Builder Designs 4.7.3.2. Updating Registers with the Nios II Processor
4.7.4. DSP Builder Designs in Platform Designer x
4.7.4.1. Integrating a DSP Builder Design to a Platform Designer System 4.7.4.2. Modifying Avalon Streaming Blocks 4.7.4.3. Restrictions for DSP Builder Designs with Avalon Streaming Interface and AXI4-Stream Blocks 4.7.4.4. Connecting Conduit Interfaces
5. Primitive Library Blocks Tutorial x
5.1. Creating a Fibonacci Design from the DSP Builder Primitive Library 5.2. Setting the Parameters on the Testbench Source Blocks 5.3. Simulating the Fibonacci Design in Simulink 5.4. Modifying the DSP Builder Fibonacci Design to Generate Vector Signals 5.5. Simulating the RTL of the Fibonacci Design
6. IP Tutorial x
6.1. Creating an IP Design 6.2. Simulating the IP Design in Simulink 6.3. Viewing Timing Closure and Viewing Resource Utilization for the DSP Builder IP Design 6.4. Reparameterizing the DSP Builder FIR Filter to Double the Number of Channels 6.5. Doubling the Target Clock Rate for a DSP Builder IP Design
7. DSP Builder for Intel FPGAs (Advanced Blockset) Design Examples and Reference Designs x
7.1. DSP Builder Design Configuration Block Design Examples 7.2. DSP Builder FFT Design Examples 7.3. DSP Builder DDC Design Example 7.4. DSP Builder Filter Design Examples 7.5. DSP Builder Finite State Machine Design Example 7.6. DSP Builder Folding Design Examples 7.7. DSP Builder Floating Point Design Examples 7.8. DSP Builder Flow Control Design Examples 7.9. DSP Builder HDL Import Design Example 7.10. DSP Builder Host Interface Design Examples 7.11. DSP Builder Fixed-Point Matrix Multiply Engine Design Example 7.12. DSP Builder Platform Design Examples 7.13. DSP Builder Primitive Block Design Examples 7.14. DSP Builder Reference Designs 7.15. DSP Builder Waveform Synthesis Design Examples
7.1. DSP Builder Design Configuration Block Design Examples x
7.1.1. Scale 7.1.2. Local Threshold
7.2. DSP Builder FFT Design Examples x
7.2.1. FFT 7.2.2. FFT without BitReverseCoreC Block 7.2.3. IFFT 7.2.4. IFFT without BitReverseCoreC Block 7.2.5. Floating-Point FFT 7.2.6. Floating-Point FFT without BitReverseCoreC Block 7.2.7. Floating-Point iFFT 7.2.8. Floating-Point iFFT without BitReverseCoreC Block 7.2.9. Multichannel FFT 7.2.10. Multiwire Transpose 7.2.11. Parallel FFT 7.2.12. Parallel Floating-Point FFT 7.2.13. Single-Wire Transpose 7.2.14. Switchable FFT/iFFT 7.2.15. Variable-Size Fixed-Point FFT 7.2.16. Variable-Size Fixed-Point FFT without BitReverseCoreC Block 7.2.17. Variable-Size Fixed-Point iFFT 7.2.18. Variable-Size Fixed-Point iFFT without BitReverseCoreC Block 7.2.19. Variable-Size Floating-Point FFT 7.2.20. Variable-Size Floating-Point FFT without BitReverseCoreC Block 7.2.21. Variable-Size Floating-Point iFFT 7.2.22. Variable-Size Floating-Point iFFT without BitReverseCoreC Block 7.2.23. Variable-Size Low-Resource FFT 7.2.24. Variable-Size Low-Resource Real-Time FFT 7.2.25. Variable-Size Supersampled FFT
7.3. DSP Builder DDC Design Example x
7.3.1. DDC Design Example Subsystem 7.3.2. Building the DDC Design Example
7.3.2. Building the DDC Design Example x
7.3.2.1. DDC Design Example Generated Files
7.4. DSP Builder Filter Design Examples x
7.4.1. Complex FIR Filter 7.4.2. Decimating CIC Filter 7.4.3. Decimating FIR Filter 7.4.4. Filter Chain with Forward Flow Control 7.4.5. FIR Filter with Exposed Bus 7.4.6. Fractional FIR Filter Chain 7.4.7. Fractional-Rate FIR Filter 7.4.8. Half-Band FIR Filter 7.4.9. IIR: Full-rate Fixed-point 7.4.10. IIR: Full-rate Floating-point 7.4.11. Interpolating CIC Filter 7.4.12. Interpolating FIR Filter 7.4.13. Interpolating FIR Filter with Multiple Coefficient Banks 7.4.14. Interpolating FIR Filter with Updating Coefficient Banks 7.4.15. Root-Raised Cosine FIR Filter 7.4.16. Single-Rate FIR Filter 7.4.17. Super-Sample Decimating FIR Filter 7.4.18. Super-Sample Fractional FIR Filter 7.4.19. Super-Sample Interpolating FIR Filter 7.4.20. Variable-Rate CIC Filter
7.6. DSP Builder Folding Design Examples x
7.6.1. Position, Speed, and Current Control for AC Motors 7.6.2. Position, Speed, and Current Control for AC Motors (with ALU Folding) 7.6.3. About FOC 7.6.4. Folded FIR Filter
7.7. DSP Builder Floating Point Design Examples x
7.7.1. Black-Scholes Floating Point 7.7.2. Double-Precision Real Floating-Point Matrix Multiply 7.7.3. Fine Doppler Estimator 7.7.4. Floating-Point Mandlebrot Set 7.7.5. General Real Matrix Multiply One Cycle Per Output 7.7.6. Newton Root Finding Tutorial Step 1—Iteration 7.7.7. Newton Root Finding Tutorial Step 2—Convergence 7.7.8. Newton Root Finding Tutorial Step 3—Valid 7.7.9. Newton Root Finding Tutorial Step 4—Control 7.7.10. Newton Root Finding Tutorial Step 5—Final 7.7.11. Normalizer 7.7.12. Single-Precision Complex Floating-Point Matrix Multiply 7.7.13. Single-Precision Real Floating-Point Matrix Multiply 7.7.14. Simple Nonadaptive 2D Beamformer
7.8. DSP Builder Flow Control Design Examples x
7.8.1. Avalon-ST Interface (Input and Output FIFO Buffer) with Backpressure 7.8.2. Avalon-ST Interface (Output FIFO Buffer) with Backpressure 7.8.3. Kronecker Tensor Product 7.8.4. Parallel Loops 7.8.5. Primitive FIR with Back Pressure 7.8.6. Primitive FIR with Forward Pressure 7.8.7. Primitive Systolic FIR with Forward Flow Control 7.8.8. Rectangular Nested Loop 7.8.9. Sequential Loops 7.8.10. Triangular Nested Loop
7.9. DSP Builder HDL Import Design Example x
7.9.1. Performing a Cosimulation
7.10. DSP Builder Host Interface Design Examples x
7.10.1. Memory-Mapped Registers
7.12. DSP Builder Platform Design Examples x
7.12.1. 16-Channel DDC 7.12.2. 16-Channel DUC 7.12.3. 2-Antenna DUC for WiMAX 7.12.4. 2-Channel DUC 7.12.5. Super-Sample Rate Digital Upconverter
7.13. DSP Builder Primitive Block Design Examples x
7.13.1. 8×8 Inverse Discrete Cosine Transform 7.13.2. Automatic Gain Control 7.13.3. Bit Combine for Boolean Vectors 7.13.4. Bit Extract for Boolean Vectors 7.13.5. Color Space Converter 7.13.6. CORDIC from Primitive Blocks 7.13.7. Digital Predistortion Forward Path 7.13.8. Fibonacci Series 7.13.9. Folded Vector Sort 7.13.10. Fractional Square Root Using CORDIC 7.13.11. Fixed-point Maths Functions 7.13.12. Gaussian Random Number Generator 7.13.13. Hello World 7.13.14. Hybrid Direct Form and Transpose Form FIR Filter 7.13.15. Loadable Counter 7.13.16. Matrix Initialization of LUT 7.13.17. Matrix Initialization of Vector Memories 7.13.18. Multichannel IIR Filter 7.13.19. Quadrature Amplitude Modulation 7.13.20. Reinterpret Cast for Bit Packing and Unpacking 7.13.21. Run-time Configurable Decimating and Interpolating Half-Rate FIR Filter 7.13.22. Square Root Using CORDIC 7.13.23. Test CORDIC Functions with the CORDIC Block 7.13.24. Uniform Random Number Generator 7.13.25. Vector Sort—Sequential 7.13.26. Vector Sort—Iterative 7.13.27. Vector Initialization of Sample Delay 7.13.28. Wide Single-Channel Accumulators
7.14. DSP Builder Reference Designs x
7.14.1. 1-Antenna WiMAX DDC 7.14.2. 2-Antenna WiMAX DDC 7.14.3. 1-Antenna WiMAX DUC 7.14.4. 2-Antenna WiMAX DUC 7.14.5. 4-Carrier, 2-Antenna W-CDMA DDC 7.14.6. 1-Carrier, 2-Antenna W-CDMA DDC 7.14.7. 4-Carrier, 2-Antenna W-CDMA DUC 7.14.8. 4-Carrier, 4-Antenna DUC and DDC for LTE 7.14.9. 1-Carrier, 2-Antenna W-CDMA DDC 7.14.10. 4-Carrier, 2-Antenna High-Speed W-CDMA DUC at 368.64 MHz with Total Rate Change 32 7.14.11. 4-Carrier, 2-Antenna High-Speed W-CDMA DUC at 368.64 MHz with Total Rate Change 48 7.14.12. 4-Carrier, 2-Antenna High-Speed W-CDMA DUC at 307.2 MHz with Total Rate Change 40 7.14.13. Cholesky-based Matrix Inversion 7.14.14. Cholesky Solver Multiple Channels 7.14.15. Crest Factor Reduction 7.14.16. Direct RF with Synthesizable Testbench 7.14.17. Dynamic Decimating FIR Filter 7.14.18. Multichannel QR Decompostion 7.14.19. QR Decompostion 7.14.20. QRD Solver 7.14.21. Reconfigurable Decimation Filter 7.14.22. Single-Channel 10-MHz LTE Transmitter 7.14.23. STAP Radar Forward and Backward Substitution 7.14.24. STAP Radar Steering Generation 7.14.25. STAP Radar QR Decomposition 192x204 7.14.26. Time Delay Beamformer 7.14.27. Transmit and Receive Modem 7.14.28. Variable Integer Rate Decimation Filter
7.15. DSP Builder Waveform Synthesis Design Examples x
7.15.1. Complex Mixer 7.15.2. Four Channel, Two Banks NCO 7.15.3. Four Channel, Four Banks NCO 7.15.4. Four Channel, Eight Banks, Two Wires NCO 7.15.5. Four Channel, 16 Banks NCO 7.15.6. IP 7.15.7. NCO 7.15.8. NCO with Exposed Bus 7.15.9. Real Mixer 7.15.10. Super-sample NCO
8. DSP Builder Design Rules, Design Recommendations, and Troubleshooting x
8.1. DSP Builder Design Rules and Recommendations 8.2. Troubleshooting DSP Builder Designs
8.2. Troubleshooting DSP Builder Designs x
8.2.1. About Loops 8.2.2. Closing Timed feedback Loops 8.2.3. Loops, Clock Cycles, and Data Cycles
9. About DSP Builder for Intel FPGAs Optimization x
9.1. Associating DSP Builder with MATLAB 9.2. Setting Up Simulink for DSP Builder Designs 9.3. The DSP Builder Windows Shortcut 9.4. Setting DSP Builder Design Parameters with MATLAB Scripts 9.5. Managing your Designs 9.6. How to Manage Latency 9.7. Flow Control in DSP Builder Designs 9.8. Reset Minimization 9.9. About Importing HDL
9.2. Setting Up Simulink for DSP Builder Designs x
9.2.1. Setting Up Simulink Solver 9.2.2. Setting Up Simulink Signal Display Option
9.4. Setting DSP Builder Design Parameters with MATLAB Scripts x
9.4.1. Running Setup Scripts Automatically 9.4.2. Defining Unique DSP Builder Design Parameters 9.4.3. Example DSP Builder Custom Scripts
9.5. Managing your Designs x
9.5.1. Managing Basic Parameters 9.5.2. Creating User Libraries and Converting a Primitive Subsystem into a Custom Block 9.5.3. Revision Control
9.6. How to Manage Latency x
9.6.1. Reading the Added Latency Value for an IP Block 9.6.2. Zero Latency Example 9.6.3. Implicit Delays in DSP Builder Designs 9.6.4. Distributed Delays in DSP Builder Designs 9.6.5. Latency and fMAX Constraint Conflicts in DSP Builder Designs 9.6.6. Control Units Delays
10. About Folding x
10.1. ALU Folding 10.2. Removing Resource Sharing Folding
10.1. ALU Folding x
10.1.1. ALU Folding Limitations 10.1.2. ALU Folding Parameters 10.1.3. ALU Folding Simulation Rate 10.1.4. Using ALU Folding 10.1.5. Using Automated Verification 10.1.6. Ready Signal 10.1.7. Connecting the ALU Folding Ready Signal 10.1.8. About the ALU Folding Start of Packet Signal
11. Floating-Point Data Types x
11.1. DSP Builder Floating-Point Data Type Features 11.2. DSP Builder Supported Floating-Point Data Types 11.3. DSP Builder Round-Off Errors 11.4. Trading Off Logic Utilization and Accuracy in DSP Builder Designs 11.5. Upgrading Pre v14.0 Designs 11.6. Floating-Point Sine Wave Generator Tutorial 11.7. Newton-Raphson Root Finding Tutorial 11.8. Forcing Soft Floating-point Data Types with the Advanced Options
11.6. Floating-Point Sine Wave Generator Tutorial x
11.6.1. Creating a Sine Wave Generator in DSP Builder 11.6.2. Using Data Type Variables to Parameterize Designs 11.6.3. Using Data-Type Propagation in DSP Builder Designs 11.6.4. DSP Builder Testbench Verification
11.6.4. DSP Builder Testbench Verification x
11.6.4.1. Tuning ATB Thresholds 11.6.4.2. Writing Application Specific Verification 11.6.4.3. Performing Bit-Accurate Simulation 11.6.4.4. Adder Trees and Scalar Products 11.6.4.5. Creating Floating-Point Accumulators for Designs that Use Iteration
11.7. Newton-Raphson Root Finding Tutorial x
11.7.1. Implementing the Newton Design 11.7.2. Improving DSP Builder Floating-Point Designs
12. Design Configuration Library x
12.1. Avalon Memory-Mapped Agent Settings (AvalonMemoryMappedAgentSettings) 12.2. Control 12.3. Device 12.4. LocalThreshold
12.2. Control x
12.2.1. DSP Builder Memory and Multiplier Trade-Off Options
13. IP Library x
13.1. Channel Filter and Waveform Library 13.2. Dependent Delay Library 13.3. FFT IP Library
13.1. Channel Filter and Waveform Library x
13.1.1. DSP Builder FIR and CIC Filters 13.1.2. DSP Builder FIR Filters 13.1.3. Channel Viewer (ChanView) 13.1.4. Complex Mixer (ComplexMixer) 13.1.5. Decimating CIC 13.1.6. Decimating FIR 13.1.7. Fractional Rate FIR 13.1.8. Interpolating CIC 13.1.9. Interpolating FIR 13.1.10. NCO 13.1.11. Real Mixer (Mixer) 13.1.12. Scale 13.1.13. Single-Rate FIR
13.1.1. DSP Builder FIR and CIC Filters x
13.1.1.1. Common CIC and FIR Filter Features 13.1.1.2. Updated Help 13.1.1.3. Half-Band and L-Band Nyquist FIR Filters 13.1.1.4. Parameterization of CIC and FIR Filters 13.1.1.5. Setting and Changing FIR Filter Coefficients at Runtime in DSP Builder
13.1.2. DSP Builder FIR Filters x
13.1.2.1. FIR Filter Avalon-MM Interfaces 13.1.2.2. Reconfigurable FIR Filters
13.1.10. NCO x
13.1.10.1. NCO Block Phase Increment and Inversion 13.1.10.2. NCO Block Phase Increment Memory Registers 13.1.10.3. NCO Block Frequency Hopping
13.3. FFT IP Library x
13.3.1. Bit Reverse Core C (BitReverseCoreC and VariableBitReverse) 13.3.2. FFT (FFT, FFT_Light, VFFT, VFFT_Light)
14. Interfaces Library x
14.1. Memory-Mapped Library 14.2. Streaming Library
14.1. Memory-Mapped Library x
14.1.1. Bus Slave (BusSlave) 14.1.2. Bus Stimulus (BusStimulus) 14.1.3. Bus Stimulus File Reader (Bus StimulusFileReader) 14.1.4. External Memory, Memory Read, Memory Write 14.1.5. Register Bit (RegBit) 14.1.6. Register Field (RegField) 14.1.7. Register Out (RegOut) 14.1.8. Shared Memory (SharedMem)
14.2. Streaming Library x
14.2.1. Avalon-ST Input (AStInput) 14.2.2. Avalon-ST Input FIFO Buffer (AStInputFIFO) 14.2.3. Avalon-ST Output (AStOutput) 14.2.4. AXI4-Stream Blocks (AXI4StreamReceiver and AXI4StreamTransmitter)
15. Primitives Library x
15.1. Vector and Complex Type Support 15.2. DFT Design Elements Library 15.3. FFT Design Elements Library 15.4. Primitive Basic Blocks Library 15.5. Primitive Configuration Library 15.6. Primitive Design Elements Library
15.1. Vector and Complex Type Support x
15.1.1. Vector Type Support 15.1.2. Complex Support
15.1.1. Vector Type Support x
15.1.1.1. Element by Element Mode 15.1.1.2. Mathematical Vector Mode 15.1.1.3. Interactions with Simulink
15.1.2. Complex Support x
15.1.2.1. Interactions with Simulink
15.2. DFT Design Elements Library x
15.2.1. DFT (DFT) 15.2.2. Reorder (ReorderBlock) 15.2.3. Reorder and Rescale (ReorderAndRescale)
15.3. FFT Design Elements Library x
15.3.1. About Pruning and Twiddle for FFT Blocks 15.3.2. Bit Vector Combine (BitVectorCombine) 15.3.3. Butterfly Unit (BFU) 15.3.4. Butterfly I C (BFIC) (Deprecated) 15.3.5. Butterfly II C (BFIIC) (Deprecated) 15.3.6. Choose Bits (ChooseBits) 15.3.7. Crossover Switch (XSwitch) 15.3.8. Dual Twiddle Memory (DualTwiddleMemoryC) 15.3.9. Edge Detect (EdgeDetect) 15.3.10. Floating-Point Twiddle Generator (TwiddleGenF) (Deprecated) 15.3.11. Fully-Parallel FFTs (FFT2P, FFT4P, FFT8P, FFT16P, FFT32P, and FFT64P) 15.3.12. Fully-Parallel FFTs with Flexible Ordering (FFT2X, FFT4X, FFT8X, FFT16X, FFT32X, and FFT64X) 15.3.13. General Multitwiddle and General Twiddle (GeneralMultiTwiddle, GeneralMultVTwiddle, GeneralTwiddle, GeneralVTwiddle) 15.3.14. Hybrid FFT (Hybrid_FFT, HybridVFFT, HybridVFFT_btb) 15.3.15. Multiwire Transpose (MultiwireTranspose) 15.3.16. Parallel Pipelined FFT (PFFT_Pipe) 15.3.17. Pulse Divider (PulseDivider) 15.3.18. Pulse Multiplier (PulseMultiplier) 15.3.19. Single-Wire Transpose (Transpose) 15.3.20. Split Scalar (SplitScalar) 15.3.21. Streaming FFTs (FFT2, FFT4, VFFT2, and VFFT4) 15.3.22. Stretch Pulse (StretchPulse) 15.3.23. Twiddle Angle (TwiddleAngle) 15.3.24. Twiddle Generator (TwiddleGenC) Deprecated 15.3.25. Twiddle and Variable Twiddle (Twiddle and VTwiddle) 15.3.26. Twiddle ROM (TwiddleRom, TwiddleMultRom and TwiddleRomF (deprecated))
15.4. Primitive Basic Blocks Library x
15.4.1. Absolute Value (Abs) 15.4.2. Accumulator (Acc) 15.4.3. Add 15.4.4. Add SLoad (AddSLoad) 15.4.5. AddSub 15.4.6. AddSubFused 15.4.7. AND Gate (And) 15.4.8. Bit Combine (BitCombine) 15.4.9. Bit Extract (BitExtract) 15.4.10. Bit Reverse (BitReverse) 15.4.11. Compare (CmpCtrl) 15.4.12. Complex Conjugate (ComplexConjugate) 15.4.13. Compare Equality (CmpEQ) 15.4.14. Compare Greater Than (CmpGE) 15.4.15. Compare Less Than (CmpLT) 15.4.16. Compare Not Equal (CmpNE) 15.4.17. Constant (Const) 15.4.18. Constant Multiply (Const Mult) 15.4.19. Convert 15.4.20. CORDIC 15.4.21. Counter 15.4.22. Count Leading Zeros, Ones, or Sign Bits (CLZ) 15.4.23. Dual Memory (DualMem) 15.4.24. Demultiplexer (Demux) 15.4.25. Divide 15.4.26. Fanout 15.4.27. FIFO 15.4.28. Floating-point Classifier (FloatClass) 15.4.29. Floating-point Multiply Accumulate (MultAcc) 15.4.30. ForLoop 15.4.31. Load Exponent (LdExp) 15.4.32. Left Shift (LShift) 15.4.33. Loadable Counter (LoadableCounter) 15.4.34. Look-Up Table (Lut) 15.4.35. Loop 15.4.36. Math 15.4.37. Minimum and Maximum (MinMax) 15.4.38. MinMaxCtrl 15.4.39. Multiply (Mult) 15.4.40. Multiplexer (Mux) 15.4.41. NAND Gate (Nand) 15.4.42. Negate 15.4.43. NOR Gate (Nor) 15.4.44. NOT Gate (Not) 15.4.45. OR Gate (Or) 15.4.46. Polynomial 15.4.47. Ready 15.4.48. Reinterpret Cast (ReinterpretCast) 15.4.49. Round 15.4.50. Sample Delay (SampleDelay) 15.4.51. Scalar Product 15.4.52. Select 15.4.53. Sequence 15.4.54. Shift 15.4.55. Sqrt 15.4.56. Subtract (Sub) 15.4.57. Sum of Elements (SumOfElements) 15.4.58. Trig 15.4.59. XNOR Gate (Xnor) 15.4.60. XOR Gate (Xor)
15.5. Primitive Configuration Library x
15.5.1. Channel In (ChannelIn) 15.5.2. Channel Out (ChannelOut) 15.5.3. General Purpose Input (GPIn) 15.5.4. General Purpose Output (GPOut) 15.5.5. Synthesis Information (SynthesisInfo)
15.5.5. Synthesis Information (SynthesisInfo) x
15.5.5.1. Scheduled Synthesis 15.5.5.2. Updated Help
15.6. Primitive Design Elements Library x
15.6.1. Anchored Delay 15.6.2. Complex to Real-Imag 15.6.3. Enabled Delay Line 15.6.4. Enabled Feedback Delay 15.6.5. Expand Scalar (ExpandScalar) 15.6.6. Finite State Machine 15.6.7. Nested Loops (NestedLoop1, NestedLoop2, NestedLoop3) 15.6.8. Pause 15.6.9. Reset-Priority Latch (SRlatch_PS) 15.6.10. Same Data Type (SameDT) 15.6.11. Set-Priority Latch (SRlatch) 15.6.12. Single-Cycle Latency Latch (latch_1L) 15.6.13. Tapped Line Delay (TappedLineDelay) 15.6.14. Variable Super-Sample Delay (VariableDelay) 15.6.15. Vector Fanout (VectorFanout) 15.6.16. Vector Multiplexer (VectorMux) 15.6.17. Zero-Latency Latch (latch_0L)
16. Utilities Library x
16.1. Analyze and Test Library 16.2. HDL Import Library
16.1. Analyze and Test Library x
16.1.1. Capture Values 16.1.2. Dechannelizer 16.1.3. Channelizer 16.1.4. Display Resources 16.1.5. Edit Params 16.1.6. Pause
16.2. HDL Import Library x
16.2.1. HDL Import 16.2.2. HDL Import Config
1. Answers to Top FAQs
2. About DSP Builder for Intel® FPGAs
3. DSP Builder for Intel FPGAs Advanced Blockset Getting Started
4. DSP Builder Design Flow
5. Primitive Library Blocks Tutorial
6. IP Tutorial
7. DSP Builder for Intel FPGAs (Advanced Blockset) Design Examples and Reference Designs
8. DSP Builder Design Rules, Design Recommendations, and Troubleshooting
9. About DSP Builder for Intel FPGAs Optimization
10. About Folding
11. Floating-Point Data Types
12. Design Configuration Library
13. IP Library
14. Interfaces Library
15. Primitives Library
16. Utilities Library
17. Simulink Supported Blocks
18. Document Revision History for DSP Builder for Intel FPGAs (Advanced Blockset) Handbook

15.4. Primitive Basic Blocks Library

Use the DSP Builder advanced blockset Primitive Basic Blocks library blocks to implement low-level basic functions.
  1. Absolute Value (Abs)
    The Abs block outputs the absolute value of the input:
  2. Accumulator (Acc)
    The Acc block implements an application-specific floating-point accumulator.
  3. Add
    The Add block outputs the sum of the inputs:
  4. Add SLoad (AddSLoad)
    The AddSLoad block performs the following function:
  5. AddSub
    The AddSub block produces either the sum (a + b) or the difference (a – b) depending on the input you select (1 for add; 0 for subtract).
  6. AddSubFused
    The AddSubFused block produces both the sum and the difference of the IEEE floating-point signals that arrive on the input ports.
  7. AND Gate (And)
    The And block outputs the logical AND of the input values.
  8. Bit Combine (BitCombine)
    The BitCombine block outputs the bit concatenation of the input values:
  9. Bit Extract (BitExtract)
    The BitExtract block outputs the bits extracted from the input, and recast as the specified data type:
  10. Bit Reverse (BitReverse)
    The BitReverse primitive block reverses the bits at the input. The MSB is output as the LSB.
  11. Compare (CmpCtrl)
    The CmpCtrl block produces the Boolean result of comparing two IEEE floating-point input signals. A select line controls the comparison. The select line is at least three-bits wide to select from five different comparison operators.
  12. Complex Conjugate (ComplexConjugate)
    The ComplexConjugate block outputs the complex conjugate of its input value.
  13. Compare Equality (CmpEQ)
    The CmpEQ block outputs true if and only if the two inputs have the same value:
  14. Compare Greater Than (CmpGE)
    The CmpGE block outputs true if and only if the first input is greater than or equal to the second input:
  15. Compare Less Than (CmpLT)
    The CmpLT block outputs true if and only if the first input is less than the second input:
  16. Compare Not Equal (CmpNE)
    The CmpNE block outputs true if the two inputs do not have the same value:
  17. Constant (Const)
    The Const block outputs a specified constant value.
  18. Constant Multiply (Const Mult)
    The Const Mult block scales the input by a user configurable coefficient and outputs the result.
  19. Convert
    The Convert block performs a type conversion of the input, and outputs the new data type.
  20. CORDIC
    The CORDIC block performs a coordinate rotation using the coordinate rotation digital computer algorithm.
  21. Counter
    The Counter block maintains a counter and outputs the counter value each cycle.
  22. Count Leading Zeros, Ones, or Sign Bits (CLZ)
    The CLZ block counts the leading zeros, ones, or sign bits of the input, and outputs that count.
  23. Dual Memory (DualMem)
    The DSP Builder DualMem block models a dual interface memory structure. You can read or write the first data interface (inputs d, a, and w).
  24. Demultiplexer (Demux)
    The Demux block deserializes the DSP Builder protocol bus on its inputs to produce a configurable number of output signals without TDM.
  25. Divide
    The Divide block divides the first input, a by the second input, b, to calculate the quotient, i.e. q = a/b. You can configure the divide block as a floating-point divider, fixed-point divider, or integer divider.
  26. Fanout
    The Fanout block behaves like a wire, connecting its single input to one or more outputs. The Fanout and VectorFanout are similar blocks.
  27. FIFO
    The FIFO block models a FIFO memory. DSP Builder writes data through the d input when the write-enable input w is high. After some implementation-specific number of cycles, DSP Builder presents data at output q and the valid output v goes high. DSP Builder holds this data at output q until the read acknowledge input r is set high.
  28. Floating-point Classifier (FloatClass)
    The FloatClass block indicates whether a floating-point input is equal to zero, is signed (negative), is infinity, or is equal to not a number.
  29. Floating-point Multiply Accumulate (MultAcc)
    The MultAcc block instantiates a DSP block in multiply-accumulate mode. This block only works on any device with a floating-point DSP block and supports a hardware single-precision multiply accumulate structure. The block latency is 4 cycles.
  30. ForLoop
    The ForLoop block extends the basic loop, providing a more flexible structure that implements all common loop structures—for example, triangular loops, parallel loops, and sequential loops.
  31. Load Exponent (LdExp)
  32. Left Shift (LShift)
    The LShift block outputs the left shifted version of the input value.
  33. Loadable Counter (LoadableCounter)
    The LoadableCounter block maintains a counter that you can reload with new parameters as needed in-circuit. The value of the counter increments by the step value every cycle for which the enable input is high. If the counter exceeds or equals the modulo value, or underflows in the case of a negative step value, it wraps around to zero or the value minus the modulo value as applicable. The current counter value is always available from the block's only output.
  34. Look-Up Table (Lut)
    The DSP Builder Lut block outputs the contents of a look-up table, indexed by the input.
  35. Loop
    The Loop block maintains a set of counters that implement the equivalent of a nested for loop in software. The counted values range from 0 to limit values provided with an input signal.
  36. Math
    The Math block applies a mathematical operation to its floating-point inputs and outputs the floating-point result. A mask parameter popup menu selects the required elementary mathematical function that DSP Builder applies.
  37. Minimum and Maximum (MinMax)
    The MinMax block allows you to select a bounding function to apply to the inputs.
  38. MinMaxCtrl
    The MinMaxCtrl block applies a minimum or maximum operator to the inputs depending on the Boolean signal it receives on the control port.
  39. Multiply (Mult)
    The Mult block outputs the product of the inputs:
  40. Multiplexer (Mux)
    The Mux block allows a variable number of inputs and outputs the selected input, or zero if the select value is invalid (outside the number of data signals).
  41. NAND Gate (Nand)
    The Nand block outputs the logical NAND of the input values:
  42. Negate
    The Negate block outputs the negation of the input value.
  43. NOR Gate (Nor)
    The Nor block outputs the logical NOR of the input values:
  44. NOT Gate (Not)
    The Not block outputs the logical NOT of the input value:
  45. OR Gate (Or)
    The Or block outputs the logical OR of the input values:
  46. Polynomial
    The Polynomial block takes input x, and provides the result of evaluating a polynomial of degree, n:
  47. Ready
    Use the Ready block in designs with ALU folding. The Ready block adds a ready signal to your design.
  48. Reinterpret Cast (ReinterpretCast)
    The ReinterpretCast block outputs the same bit pattern that it reads on its input port, but casts it to a data type that you specify with the block parameters. This data type should use the same number of bits as the bit width of the input signal.
  49. Round
    The Round block applies a rounding operation to the floating-point input. A mask parameter popup menu selects the required rounding function that you apply.
  50. Sample Delay (SampleDelay)
    The SampleDelay block outputs a delayed version of the input.
  51. Scalar Product
    The Scalar Product block accepts two vector inputs of the same dimension and produces the inner product on the output.
  52. Select
    The Select block outputs one of the data signals (a, b, ...) if its paired select input (0, 1, ...) has a non-zero value.
  53. Sequence
    The Sequence block outputs a Boolean pulse of configurable duration and phase.
  54. Shift
    The Shift block outputs the logical right shifted version of the input value if unsigned, or outputs the arithmetic right shifted version of the input value if signed. The shift is specified by the input b:
  55. Sqrt
    The Sqrt block applies a numerical root operation to its input and produces the result. The mask parameter pop-up menu selects the required root function that you apply.
  56. Subtract (Sub)
    The Sub block outputs the difference between the inputs:
  57. Sum of Elements (SumOfElements)
    The SumOfElements block outputs the sum of the elements within its single data input.
  58. Trig
    The Trig block applies a trigonometric operation to its floating-point inputs and produces the floating-point result.
  59. XNOR Gate (Xnor)
    The Xnor block outputs the logical XNOR of the input values:
  60. XOR Gate (Xor)
    The Xor block outputs the logical XOR of the input values:
Level Two Title