Intel Agilex® 7 Hard Processor System Remote System Update User Guide

ID 683184
Date 6/09/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

7.2.1. Flashing the Initial RSU Image to QSPI

  1. Make sure to install the QSPI SDM bootcard on the Intel Agilex® 7 SoC Development Kit
  2. Power down the board if powered up
  3. Configure the Intel Agilex® 7 SoC Development Kit switches to have MSEL set to JTAG.
  4. Run the following command to write the image to SDM QSPI by using the command line version of the Intel® Quartus® Prime Programmer:
    cd $TOP_FOLDER
    ~/intelFPGA_pro/22.1/nios2eds/nios2_command_shell.sh \
    quartus_pgm -c 1 -m jtag -o "pvi;./initial_image.jic"
    
  5. Configure the Intel Agilex® 7 SoC Development Kit switches to have MSEL set to QSPI.