Intel Agilex® 7 Hard Processor System Remote System Update User Guide

ID 683184
Date 6/09/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.2.3.1.2. Creating Initial Flash Image for HPS First

Creating the initial flash image for HPS first is similar with creating the initial flash image for FPGA first, with a few small changes described below.

Instead of JTAG Indirect Configuration File (.jic), select the Raw Binary File for HPS Core Configuration (.rbf) then check the JTAG Indirect Configuration File for Periphery Configuration (. jic), Memory Map File (.map), and the Raw Programming Data File (.rpd) options as shown below.

You can also make the factory image and application image partitions much smaller, because they do not store the FPGA fabric configuration data.

After clicking the Generate button the following additional files are generated:

  • initial_image_FACTORY_IMAGE.core.rbf—containing the FPGA fabric configuration data for the factory image.
  • initial_image_P1.core.rbf—containing FPGA fabric configuration data for the application image P1.