Double Data Rate I/O (ALTDDIO_IN, ALTDDIO_OUT, and ALTDDIO_BIDIR) IP Cores User Guide

Download PDF
ID 683148
Date 6/19/2017
Public
Document Table of Contents
Document Table of Contents x
1. Double Data Rate I/O (ALTDDIO_IN, ALTDDIO_OUT, and ALTDDIO_BIDIR) IP Cores User Guide
1. Double Data Rate I/O (ALTDDIO_IN, ALTDDIO_OUT, and ALTDDIO_BIDIR) IP Cores User Guide x
1.1. ALTDDIO Features 1.2. ALTDDIO Common Applications 1.3. ALTDDIO Resource Utilization and Performance 1.4. ALTDDIO Parameter Settings 1.5. ALTDDIO Functional Description 1.6. Design Example: 8-Bit DDR Divider Using ALTDDIO_BIDIR 1.7. ALTDDIO_IN IP Core Signals 1.8. ALTDDIO_OUT IP Core Signals 1.9. ALTDDIO_BIDIR IP Core Signals 1.10. Verilog HDL Prototype 1.11. VHDL Component Declaration 1.12. VHDL LIBRARY-USE Declaration 1.13. Double Data Rate I/O (ALTDDIO_IN, ALTDDIO_OUT, and ALTDDIO_BIDIR) IP Cores User Guide Archives 1.14. Document Revision History
1.2. ALTDDIO Common Applications x
1.2.1. DDR SDRAM, DDR2 SDRAM and RLDRAM II Memory 1.2.2. QDR SRAM and QDRII SRAM Memory Interfaces 1.2.3. High-Speed Interface Applications
1.5. ALTDDIO Functional Description x
1.5.1. DDR Device Configuration 1.5.2. DDR I/O Timing
1.5.1. DDR Device Configuration x
1.5.1.1. Input Configuration 1.5.1.2. Output Configuration 1.5.1.3. Bidirectional Configuration
1.6. Design Example: 8-Bit DDR Divider Using ALTDDIO_BIDIR x
1.6.1. Generate a Divider Using ALTDDIO_BIDIR 1.6.2. Create a Divider 1.6.3. Implement the Divider Design 1.6.4. Functional Results—Simulate the Divider Design in the ModelSim* - Intel® FPGA Edition Software
1.6.1. Generate a Divider Using ALTDDIO_BIDIR x
1.6.1.1. Create the ALTDDIO_BIDIR IP Core 1.6.1.2. Create the LPM_DIVIDE IP core
1. Double Data Rate I/O (ALTDDIO_IN, ALTDDIO_OUT, and ALTDDIO_BIDIR) IP Cores User Guide

1.6.3. Implement the Divider Design

This section describes how to assign the Stratix® EP1S10F780C6 device to the project and compile the project.
  1. With the ex2.qar project open, on the Assignments menu, click Settings. The Settings dialog box displays.
  2. In the Category list, select Device.
  3. To answer Which device family will you be using?, select Stratix® .
  4. Under Target device, select Specific device selected in ‘Available devices’ list.
  5. In the Available devices list, select EP1S10F780C6.
  6. Under Show in ‘Available devices’ list, select FBGA as the Package, Pin count of 780, Speed grade of 6, and turn on Show Advanced Devices.
  7. Click OK.
  8. On the Processing menu, click Start Compilation.
  9. When the Full Compilation was successful box displays, click OK.
Level Two Title