Intel® Quartus® Prime Pro Edition User Guide: Design Constraints

ID 683143
Date 10/02/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.1.2.6. Step 6: Validate and Export Plan Constraints

You must validate your interface plan before exporting the plan constraints to your project as a generated Tcl script. Validation must confirm that the Fitter can place all remaining unplaced design elements before you can generate the script. When you are satisfied with your interface plan, follow these steps to validate and apply the interface plan to your Intel® Quartus® Prime project:
  1. In the Flow control, click Validate Plan. The Fitter confirms placement of all remaining unplaced design elements. You must correct any errors before you can export constraints.
  2. After validation, click Export Constraints to generate a Tcl script that applies the plan to your project. The output Tcl file contains instructions to apply the interface plan to your Intel® Quartus® Prime project.
  3. Close Interface Planner.
  4. To apply the exported interface plan constraints to your Intel® Quartus® Prime project, click Tools > Tcl Scripts and select the <project name>.pdp_assignments.tcl script file.
  5. Click Run. The script runs, applying the Interface Planner constraints to the project. Alternatively, you can run the script from the project directory:
    quartus_sh –t <assignments_file>.tcl
  6. To run synthesis and apply the interface plan in your project, click Start > Start Analysis & Synthesis.
  7. Confirm the implementation of your plan by reviewing the Compilation Report.